Jeep Grand Cherokee SRT 2014 Operating instructions

CAUTION!

Before towing this vehicle please refer to pages 259-271 and pages

286-288 to ensure that you do not damage your transmission or other

powertrain components. Failure to follow these towing instructions will

result in damage that is NOT covered under warranty.

Table of Contents

1

INTRODUCTION

.....................................................................3

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

.............................................9

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

.............................................65

4

UNDERSTANDING YOUR INSTRUMENT PANEL

.................................................147

5

STARTING AND OPERATING

............................................................201

6

WHAT TO DO IN EMERGENCIES

..........................................................273

7

MAINTAINING YOUR VEHICLE

...........................................................289

8

MAINTENANCE SCHEDULES

............................................................327

9

IF YOU NEED CONSUMER ASSISTANCE

.....................................................329

10

INDEX

.........................................................................333

1

2

1

INTRODUCTION

• INTRODUCTION ...............................4

• ROLLOVER WARNING ...........................4

• IMPORTANT NOTICE ............................5

• HOW TO USE THIS MANUAL .......................6

• WARNINGS AND CAUTIONS .......................8

• VEHICLE IDENTIFICATION NUMBER ..................8

• VEHICLE MODIFICATIONS/ALTERATIONS ...............8

3

INTRODUCTION

Congratulations on selecting your new Chrysler

Group LLC vehicle. Be assured that it repre-

sents precision workmanship, distinctive styl-

ing, and high quality - all essentials that are

traditional to our vehicles.

This is a specialized utility vehicle. It can go

places and perform tasks that conventional

passenger cars are not intended. It handles and

maneuvers differently from many passenger

cars both on-road and off-road, so take time to

become familiar with your vehicle.

The two-wheel drive version of this vehicle was

designed for on-road use only. It is not intended

for off-road driving or use in other severe con-

ditions suited for a four-wheel drive vehicle.

Before you start to drive this vehicle, read the

Owner’s Manual and all the Supplements. Be

sure you are familiar with all vehicle controls,

particularly those used for braking, steering,

and transmission and transfer case shifting.

Learn how your vehicle handles on different

road surfaces. Your driving skills will improve

with experience, but as in driving any vehicle,

take it easy as you begin. When driving off-road

or working the vehicle, don’t overload it or

expect it to overcome the forces of nature.

Always observe local laws wherever you drive.

As with other vehicles of this type, failure to

operate this vehicle correctly may result in loss

of control or a collision. Be sure to read the

“On-Road/ Off-Road Driving Tips” in “Starting

And Operating” for further information.

NOTE:

After reviewing the owner information, it

should be stored in the vehicle for conve-

nient referencing and remain with the ve-

hicle when sold.

Failure to operate this vehicle correctly may

result in loss of control or a collision.

Operating this vehicle at excessive speeds may

result in loss of control, collision with other

vehicles or objects, going off the road, or over-

turning; any of which may lead to serious injury

or death. Also, failure to use seat belts subjects

the driver and passengers to a greater risk of

injury or death.

To keep your vehicle running at its best, have

your vehicle serviced at recommended intervals

by an authorized dealer or distributor who has

the qualified personnel, special tools and equip-

ment to perform all service.

The manufacturer and its distributors are vitally

interested in your complete satisfaction with this

vehicle. If you encounter a service or warranty

problem which is not resolved to your satisfac-

tion, discuss the matter with your authorized

dealer or distributor’s management.

Your authorized dealer or distributor will be

happy to assist you with any questions about

your vehicle.

ROLLOVER WARNING

Utility vehicles have a significantly higher roll-

over rate than other types of vehicles. This

vehicle has a higher ground clearance and a

higher center of gravity than many passenger

cars. It is capable of performing better in a wide

variety of off-road applications. Driven in an

unsafe manner, all vehicles can go out of con-

trol. Because of the higher center of gravity, if

this vehicle is outof control it may roll over when

some other vehicles may not.

4

Do not attempt sharp turns, abrupt maneuvers,

or other unsafe driving actions that can cause

loss of vehicle control. Failure to operate this

vehicle safely may result in a collision, rollover

of the vehicle, and severe or fatal injury. Drive

carefully.

Failure to use the driver and passenger seat

belts provided is a major cause of severe or

fatal injury. In a rollover crash, an unbelted

person is significantly more likely to die than a

person wearing a seat belt. Always buckle up.

IMPORTANT NOTICE

ALL MATERIAL CONTAINED IN THIS PUBLI-

CATION IS BASED ON THE LATEST INFOR-

MATION AVAILABLE AT TIME OF PUBLICA-

TION APPROVAL. THE RIGHT IS RESERVED

TO PUBLISH REVISIONS AT ANY TIME.

This Owner’s Manual has been prepared with

the assistance of service and engineering spe-

cialists to acquaint you with the operation and

maintenance of your new vehicle. It is supple-

mented by a Warranty Information Booklet and

various customer-oriented documents. You are

urged to read these publications carefully. Fol-

lowing the instructions and recommendations in

this Owner’s Manual will help assure safe and

enjoyable operation of your vehicle.

After you have read the Owner’s Manual, it

should be stored in the vehicle for convenient

reference and remain with the vehicle when

sold.

The manufacturer reserves the right to make

changes in design and specifications, and/or to

make additions to or improvements in its prod-

ucts without imposing any obligations upon

itself to install them on products previously

manufactured.

The Owner’s Manual illustrates and describes

the features that are standard or available as

extra cost options. Therefore, some of the

equipment and accessories in this publication

may not appear on your vehicle.

NOTE:

Be sure to read the Owner’s Manual first

before driving your vehicle and before at-

taching or installing parts/accessories or

making other modifications to the vehicle.

In view of the many replacement parts and

accessories from various manufacturers avail-

able on the market, the manufacturer cannot be

certain that the driving safety of your vehicle will

not be impaired bythe attachment or installation

of such parts. Even if such parts are officially-

approved (for example, by a general operating

permit for the part or by constructing the part in

an officially approved design), or if an individual

operating permit was issued for the vehicle after

the attachment or installation of such parts, it

cannot be implicitly assumed that the driving

Rollover Warning Label

5

safety of your vehicle is unimpaired. Therefore,

neither experts nor official agencies are liable.

The manufacturer only assumes responsibility

when parts, which are expressly authorized or

recommended by the manufacturer, are at-

tached or installed at an authorized dealer. The

same applies when modifications to the original

condition are subsequently made on the manu-

facturer’s vehicles.

Your warranties do not cover any part that the

manufacturer did not supply. Nor do they cover

the cost of anyrepairs or adjustments that might

be caused or needed because of the installation

or use of non-manufacturer parts, components,

equipment, materials, or additives. Nor do your

warranties cover the costs of repairing damage

or conditions caused by any changes to your

vehicle that do not comply with the manufactur-

ers specifications.

Original Mopar® parts and accessories and

other products approved by the manufacturer,

including qualified advice, are available at your

authorized dealer.

When it comes to service, remember that your

authorized dealer knows your vehicle best, has

the factory-trained technicians and genuine

Mopar® parts, and is interested in your satis-

faction.

HOW TO USE THIS MANUAL

Consult the Table of Contents to determine which

section contains the information you desire.

Since the specification of your vehicle depends

on the items of equipment ordered, certain

descriptions and illustrations may differ from

your vehicle’s equipment.

The detailed index at the back of this Owner’s

Manual contains a complete listing of all sub-

jects.

Consult the following table for a description of

the symbols that may be used on your vehicle or

throughout this Owner’s Manual:

6

7

WARNINGS AND CAUTIONS

This Owners Manual contains WARNINGS

against operating procedures that could result

in a collision or bodily injury. It also contains

CAUTIONS against procedures that could re-

sult in damage to your vehicle. If you do not

read this entire Owners Manual, you may miss

important information. Observe all Warnings

and Cautions.

VEHICLE IDENTIFICATION

NUMBER

The Vehicle Identification Number (VIN) is

found on a plate located on the left front corner

of the instrument panel pad, visible from outside

of the vehicle through the windshield.This num-

ber also is stamped into the right front body,

behind the right front seat. Move the right front

seat forward to allow better viewing of the

stamped VIN.

NOTE:

It is illegal to remove or alter the VIN.

VEHICLE MODIFICATIONS/

ALTERATIONS

WARNING!

Any modifications or alterations to this ve-

hicle could seriously affect its roadworthi-

ness and safety and may lead to a collision

resulting in serious injury or death.

VIN Location

Right Front Body VIN Location

8

2

THINGS TO KNOW BEFORE STARTING

YOUR VEHICLE

• A WORD ABOUT YOUR KEYS ......................12

• Keyless Ignition Node (KIN) ......................12

• KeyFob..................................12

• Ignition Or Accessory On Message ..................13

• STEERING WHEEL LOCK — IF EQUIPPED ..............14

• To Manually Lock The Steering Wheel ................14

• To Release The Steering Wheel Lock .................14

• SENTRY KEY®................................14

• Replacement Keys ...........................15

• Customer Key Programming ......................15

• General Information ...........................15

• VEHICLE SECURITY ALARM — IF EQUIPPED ............15

• To Arm The System ...........................15

• To Disarm The System .........................16

• Tamper Alert ...............................16

• ILLUMINATED ENTRY ...........................17

• REMOTE KEYLESS ENTRY (RKE) ...................17

• To Unlock The Doors And Liftgate...................17

9

• To Lock The Doors And Liftgate ......................18

• Programming Additional Transmitters...................18

• Transmitter Battery Replacement .....................18

• General Information .............................19

• DOOR LOCKS ..................................19

• Power Door Locks ..............................20

• Child-Protection Door Lock System — Rear Doors ...........21

• KEYLESS ENTER-N-GO™ ..........................22

• WINDOWS ....................................24

• Power Windows ...............................24

• Wind Buffeting ................................26

• LIFTGATE ....................................26

• Power Liftgate — If Equipped .......................27

• OCCUPANT RESTRAINTS ..........................28

• Lap/Shoulder Belts .............................31

• Lap/Shoulder Belt Untwisting Procedure ................34

• Seat Belts In Passenger Seating Positions................34

• Automatic Locking Retractor Mode (ALR) — If Equipped .......34

• Energy Management Feature ........................35

• Seat Belt Pretensioners ...........................35

• Supplemental Active Head Restraints (AHR) ...............36

• Enhanced Seat Belt Use Reminder System (BeltAlert®) ........38

• Seat Belts And Pregnant Women .....................38

• Supplemental Restraint System (SRS) — Air Bags ...........39

• Advanced Front Air Bag Features .....................40

• Air Bag Deployment Sensors And Controls ...............42

10

• Event Data Recorder (EDR) ......................46

• Child Restraints .............................47

• ENGINE BREAK-IN RECOMMENDATIONS ..............60

• SAFETY TIPS ................................61

• Transporting Passengers ........................61

• Exhaust Gas ...............................61

• Safety Checks You Should Make Inside The Vehicle ........61

• Periodic Safety Checks You Should Make Outside

The Vehicle ................................63

11

A WORD ABOUT YOUR KEYS

Your vehicle uses a keyless ignition system.

This system consists of a Key Fob with Remote

Keyless Entry (RKE) transmitter and a Keyless

Ignition Node (KIN).

Keyless Enter-N-Go™ Feature

This vehicle is equipped with the Keyless Enter-

N-Go™ feature, (refer to "Keyless Enter-N-

Go™" in "Things To Know Before Starting Your

Vehicle" for further information).

Keyless Ignition Node (KIN)

This feature allows the driver to operate the

ignition switch with the push of a button, as long

as the Remote Keyless Entry (RKE) transmitter

is in the passenger compartment.

The Keyless Ignition Node (KIN) has four oper-

ating positions, three of which are labeled and

will illuminate when in position. The three posi-

tions are OFF, ACC, and ON/RUN. The fourth

position is START, during start RUN will illumi-

nate.

NOTE:

In case the ignition switch does not change

with the push of a button, the RKE transmit-

ter (Key Fob) may have a low or dead bat-

tery. In this situation a back up method can

be used to operate the ignition switch. Put

the nose side (side opposite of the emer-

gency key) of the Key Fob against the EN-

GINE START/STOP button and push to oper-

ate the ignition switch.

Key Fob

The Key Fob also contains the Remote Keyless

Entry (RKE) transmitter and an emergency key,

which stores in the rear of the Key Fob.

The emergency key allows for entry into the

vehicle should the battery in the vehicle or the

Key Fob go dead. The emergency key is also

for locking the glove box. You can keep the

emergency key with you when valet parking.

To remove the emergency key, slide the me-

chanical latch on the back of the Key Fob

sideways with your thumb and then pull the key

out with your other hand.

Keyless Ignition Node (KIN)

Mechanical Latch On The Back Of The Key Fob

12

NOTE:

You can insert the double-sided emergency

key into the lock cylinders with either side up.

Ignition Or Accessory On Message

Opening the driver’s door when the ignition is in

ACC or ON (engine not running), a chime will

sound to remind youto cycle the ignition to OFF.

In addition to the chime, the ignition or acces-

sory on message will display in the cluster.

NOTE:

With the Uconnect® system, the power win-

dow switches, radio, power sunroof (if

equipped), and power outlets will remain

active for up to 10 minutes after the ignition

is cycled to the OFF position. Opening either

front door will cancel this feature. The time

for this feature is programmable. Refer to

“Uconnect® Settings” in “Understanding

Your Instrument Panel” for further informa-

tion.

WARNING!

• When leaving the vehicle, always remove

the Key Fob from the vehicle and lock your

vehicle.

• Never leave children alone in a vehicle, or

with access to an unlocked vehicle.

(Continued)

WARNING!

(Continued)

• Allowing children to be in a vehicle unat-

tended is dangerous for a number of rea-

sons. A child or others could be seriously

or fatally injured. Children should be

warned not to touch the parking brake,

brake pedal or the shift lever.

• Do not leave the Key Fob in or near the

vehicle, or in a location accessible to chil-

dren, and do not leave a vehicle equipped

with Keyless Enter-N-Go™ in the ACC or

ON/RUN mode. A child could operate

power windows, other controls, or move

the vehicle.

• Do not leave children or animals inside

parked vehicles in hot weather. Interior

heat build-up may cause serious injury or

death.

Emergency Key Removal

13

CAUTION!

An unlocked car is an invitation to thieves.

Always remove the Key Fob from vehicle,

cycle the ignition OFF and lock all doors

when leaving the vehicle unattended.

STEERING WHEEL LOCK — IF

EQUIPPED

Your vehicle may be equipped with a passive

electronic steering wheel lock. This lock pre-

vents steering the vehicle without the ignition

key. If the steering wheel is moved to one of the

lock positions with the key in the off positions,

the steering wheel will lock.

To Manually Lock The Steering

Wheel

With the engine running, rotate the steering

wheel one-quarter revolution in either direction,

turn off the engine and remove the key. Turn the

steering wheel slightly in either direction until

the lock engages.

To Release The Steering Wheel Lock

Cycle the ignition and start the engine.

NOTE:

If you turned the wheel to the right to engage

the lock, you must turn the wheel slightly to

the right to disengage it. If you turned the

wheel to the left to engage the lock, turn the

wheel slightly to the left to disengage it.

SENTRY KEY®

The Sentry Key® Immobilizer system prevents

unauthorized vehicle operation by disabling the

engine. The system does not need to be armed

or activated. Operation is automatic, regardless

of whether the vehicle is locked or unlocked.

The system uses a Key Fob with Remote

Keyless Entry (RKE) transmitter, a Keyless Ig-

nition Node (KIN) and a RF receiver to prevent

unauthorized vehicle operation. Therefore, only

Key Fobs that are programmed to the vehicle

can be used to start and operate the vehicle.

After cycling the ignition to the ON/RUN posi-

tion, the Vehicle Security Light will turn on for

three seconds for a bulb check. If the light

remains on after the bulb check, it indicates that

there is a problem with the electronics. In addi-

tion, if the light begins to flash after the bulb

check, it indicates that someone used an invalid

Key Fob to start the engine. Either of these

conditions will result in the engine being shut off

after two seconds.

If the Vehicle Security Light turns on during

normal vehicle operation (vehicle running for

longer than 10 seconds), it indicates that there

is a fault in the electronics. Should this occur,

have the vehicle serviced as soon as possible

by an authorized dealer.

CAUTION!

The Sentry Key® Immobilizer system is not

compatible with some after-market remote

starting systems. Use of these systems may

result in vehicle starting problemsand lossof

security protection.

All of the Key Fobs provided with your new

vehicle have been programmed to the vehicle

electronics.

14

Replacement Keys

NOTE:

Only Key Fobs that are programmed to the

vehicle electronics can be used to start and

operate the vehicle. Once a Key Fob is

programmed to a vehicle, it cannot be pro-

grammed to any other vehicle.

CAUTION!

• Always remove the Key Fobs from the

vehicle and lock all doors when leaving the

vehicle unattended.

• With Keyless Enter-N-Go™, always re-

member to place the ignition in the OFF

position.

At the time of purchase, the original owner is

provided with a four-digit Personal Identification

Number (PIN). Keep the PIN in a secure loca-

tion. This number is required for authorized

dealer replacement of Key Fobs. Duplication of

Key Fobs may be performed at an authorized

dealer.

NOTE:

When having the Sentry Key® Immobilizer

system serviced, bring all vehicle ignition

keys with you to an authorized dealer.

Customer Key Programming

Programming Key Fobs or RKE transmitters

may be performed at an authorized dealer.

General Information

The Sentry Key® operates on a carrier fre-

quency of 433.92 MHz. The Sentry Key® Im-

mobilizer system is subject to the following

conditions:

• This device may not cause harmful interfer-

ence.

• This device must accept any interference

that may be received, including interference

that may cause undesired operation.

VEHICLE SECURITY ALARM —

IF EQUIPPED

This Vehicle Security Alarm monitors the ve-

hicle doors, hood, liftgate, and ignition for unau-

thorized operation. When the alarm is armed,

the interior switches for door locks, and power

liftgate are disabled. If something triggers the

alarm, the Vehicle Security Alarm will provide

the following audible and visible signals: the

horn will pulse, and the park lamps and/or turn

signals will flash.

To Arm The System

Follow these steps to arm the Vehicle Security

Alarm:

1. Remove the key from the ignition system

(refer to "Starting Procedures" in "Starting And

Operating" for further information).

• For vehicles equipped with Keyless Enter-N-

Go™, make sure the vehicle ignition system

is "OFF".

• For vehicles not equipped with Keyless

Enter-N-Go™, make sure the vehicle ignition

system is "OFF" and the key is physically

removed from the ignition.

15

2. Perform one of the following methods to lock

the vehicle:

• Press LOCK on the interior power door lock

switch with the driver and/or passenger door

open.

• Press the LOCK button on the exterior Pas-

sive Entry Door Handle with a valid Key Fob

available in the same exterior zone (refer to

"Keyless Enter-N-Go™" in "Things To Know

Before Starting Your Vehicle" for further

information).

• Press the LOCK button on the Remote Key-

less Entry (RKE) transmitter.

3. If any doors are open, close them.

To Disarm The System

The Vehicle Security Alarm can be disarmed

using any of the following methods:

• Press the UNLOCK button on the Remote

Keyless Entry (RKE) transmitter.

• Grasp the PassiveEntry Unlock DoorHandle

(if equipped, refer to "Keyless Enter-N-Go™"

in "Things To Know Before Starting Your

Vehicle" for further information).

• Cycle the vehicle ignition system out of the

OFF position.

• For vehicles equipped with Keyless Enter-

N-Go™, press the Keyless Enter-N-Go™

Start/Stop button (requires at least one

valid Key Fob in the vehicle).

• For vehicles not equipped with Keyless

Enter-N-Go™, insert a valid key into the

ignition switch and turn the key to the ON

position.

NOTE:

• The driver’s door key cylinder and the

liftgate button on the RKE transmitter

cannot arm or disarm the Vehicle Security

Alarm.

• The Vehicle Security Alarm remains

armed during power liftgate entry. Press-

ing the liftgate button will not disarm the

Vehicle Security Alarm. If someone enters

the vehicle through the liftgate and opens

any door the alarm will sound.

• When the Vehicle Security Alarm is

armed, the interior power door lock

switches will not unlock the doors.

The Vehicle Security Alarm is designed to pro-

tect your vehicle; however, you can create

conditions where the system will give you a

false alarm. If one of the previously described

arming sequences has occurred, the Vehicle

Security Alarm will arm regardless of whether

you are in the vehicle or not. If you remain in the

vehicle and open a door, the alarm will sound. If

this occurs, disarm the Vehicle Security Alarm.

If the Vehicle Security Alarm is armed and the

battery becomes disconnected, the Vehicle Se-

curity Alarm will remain armed when the battery

is reconnected; the exterior lights will flash, the

horn will sound. If this occurs, disarm the Ve-

hicle Security Alarm.

Tamper Alert

If something has triggered the Vehicle Security

Alarm in your absence, the horn will sound three

times and the exterior lights blink three times

when you unlock the doors. Check the vehicle

for tampering.

16

Page is loading ...

Jeep Grand Cherokee SRT 2014 Operating instructions

Jeep Grand Cherokee SRT 2014 Operating instructions

Related papers

Other documents