CARLO GAVAZZI NLG02D724DC is a safety module designed to control safety barriers (ESPE: Electro-Sensitive Protective Equipment) with static PNP or relay outputs, in compliance with the Machinery Directive 98/37/EC and 2006/42/EC and the related harmonized standards. The module can be used with barriers with 1 or 2 outputs (PNP or relay), each with one or two wires. The inputs to the module must always provide for the activation of both channels S12 and S21. The module is enabled to close the safety outputs only if both terminals S12 and S21 receive a signal from actuated contacts.
CARLO GAVAZZI NLG02D724DC is a safety module designed to control safety barriers (ESPE: Electro-Sensitive Protective Equipment) with static PNP or relay outputs, in compliance with the Machinery Directive 98/37/EC and 2006/42/EC and the related harmonized standards. The module can be used with barriers with 1 or 2 outputs (PNP or relay), each with one or two wires. The inputs to the module must always provide for the activation of both channels S12 and S21. The module is enabled to close the safety outputs only if both terminals S12 and S21 receive a signal from actuated contacts.
CARLO GAVAZZI NLG02D724DC is a safety module designed to control safety barriers (ESPE: Electro-Sensitive Protective Equipment) with static PNP or relay outputs, in compliance with the Machinery Directive 98/37/EC and 2006/42/EC and the related harmonized standards. The module can be used with barriers with 1 or 2 outputs (PNP or relay), each with one or two wires. The inputs to the module must always provide for the activation of both channels S12 and S21. The module is enabled to close the safety outputs only if both terminals S12 and S21 receive a signal from actuated contacts.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI