Viking RVRF3361SS Owner's manual

Brand: Viking

Model: RVRF3361SS

Category: Side-by-side fridge-freezers

Type: Owner's manual

Use & Care Guide

Guia de Uso y Cuidado

Guide d’utilisation et d’entretien

3 Series

French Door Bottom Freezer/Refrigerator

Refrigerador con congelador inferior de puerta doble

Réfrigérateur à portes françaises/Congélateur en bas

Finding Information

Please read and save this guide

We hope you will enjoy and appreciate the care and

attention we have put into every detail of your new, state-of-

the-art refrigerator.

Your appliance is designed to offer years of reliable

service. This Use and Care Guide will provide you with

the information you need to become familiar with your

refrigerator’s care and operation.

We appreciate your choice of our refrigerator and hope

that you will again select our products for your other major

appliance needs.

Finding Information .............................................................. 2

Safety..................................................................................... 3

Feature Overview .................................................................. 5

Installation ............................................................................. 6

Removing the Doors ........................................................... 10

Connecting the Water Supply ............................................ 12

Controls ............................................................................... 13

Automatic Ice & Water Maker/Dispenser ........................... 15

Storage Features ................................................................. 16

Storing Food and Saving Energy ........................................ 20

Normal Operating Sounds & Sights ................................... 21

Changing the Water and Air Filters .................................... 22

Care and Cleaning .............................................................. 24

Solutions to Common Problems ......................................... 27

Warranty .............................................................................. 31

Table of contents

Questions?

Your complete satisfaction is our ultimate goal. If you have

any questions or comments about this product, please

contact the dealer from whom you purchased it, or contact

our Consumer Support Center at 1-888-845-4641.

For online support and product information visit www.

vikingrange.com in the US or brigade.ca in Canada

NOTE

Registering your product with Viking Range, LLC enhances

our ability to serve you. You can register online at www.

vikingrange.com or by sending your Product Registration

Card in the mail.

Doors

 Handles are secure and tight

 Door seals completely to cabinet on all sides

 Freezer drawer is level across the top

Leveling

 Refrigerator is level, side-to-side and tilted ¼” (6

mm) front-to-back

 Toe grille is properly attached to refrigerator

 Cabinet is sitting solid on all corners

Electrical Power

 House power turned on

 Refrigerator plugged in

Ice Maker

 House water supply connected to refrigerator

 No water leaks present at all connections - recheck

in 24 hours

 Ice maker is turned ON

 Front ﬁ lter must be ﬂ ush with ﬁ lter housing (select

models)

Final Checks

 Shipping material removed

 Fresh food and freezer temperatures set

 Crisper humidity controls set

 Registration card sent in

Installation Checklist

Safety

Important safety instructions

General Safety

Safety Precautions

Do not attempt to install or operate your unit until you have

read the safety precautions in this manual. Safety items

throughout this manual are labeled with a Danger, Warning,

or Caution based on the risk type.

Deﬁ nitions

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

• Do not store or use gasoline or other ﬂ ammable

liquids near this or any other appliance. Read product

labels for warnings regarding ﬂ ammability and other

hazards.

• Do not operate the refrigerator in the presence of

explosive fumes.

• Avoid contact with any moving parts of the automatic

ice maker.

• Remove all staples from the carton to avoid injury.

Staples can also damage ﬁ nishes if they come in

contact with other appliances or furniture.

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in death

or serious injury.

IMPORTANT

Indicates installation, operation, or maintenance

information which is important but not hazard-related.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in minor

or moderate injury.

WARNING

Please read all safety instructions before using your

new refrigerator.

DANGER

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in death or

serious injury.

Child Safety

Packing Materials:

• Packing cartons covered with rugs, bedspreads, plastic

sheets, or stretch wrap may become airtight chambers

and can quickly cause suffocation.

• Destroy or recycle the product’s carton, plastic bags,

and any other exterior wrapping material immediately

after the refrigerator is unpacked. Children should

never play with these items.

Child Entrapment and Suffocation:

• These problems are not limited to the past. Whether

junked, abandoned, or temporarily stored (even for a

few hours), unattended refrigerators and freezers are

dangerous. Please take the precautions listed below.

Proper Disposal of Refrigerators/Freezers

We strongly encourage responsible appliance recycling/

disposal methods. Check with your utility company or

visit www.energystar.gov/recycle for more information on

recycling your old refrigerator.

Before you recycle or dispose of your old refrigerator/freezer:

• Remove the doors.

• Leave the shelves and baskets in place so children

may not easily climb inside.

• Have refrigerant and compressor oil removed by a

qualiﬁ ed service technician.

• The refrigerator must be plugged into its own

dedicated 115 Volt, 60 Hz, AC-only non-GFCI

electric outlet. The power cord of the appliance is

equipped with a three-prong grounding plug for your

protection against electrical shock hazards. It must

be plugged directly into a properly grounded three-

prong receptacle. The receptacle must be installed in

accordance with local codes and ordinances. Consult

a qualiﬁ ed electrician.

Do not use an extension

cord or adapter plug.

• If the power cord is damaged, it should be replaced

by the manufacturer, service technician, or a qualiﬁ ed

person.

• Never unplug the refrigerator by pulling on the power

cord. Always grip the plug ﬁ rmly and pull straight out

from the receptacle to prevent damaging the power

cord.

• To avoid electrical shock, unplug the refrigerator

before cleaning and before replacing a light bulb or

LED light.

• Performance may be affected if the voltage varies

by 10% or more. Operating the refrigerator with

insufﬁ cient power can damage the compressor. Such

damage is not covered under your warranty.

• Do not plug the unit into an outlet controlled by a wall

switch or pull cord to prevent the refrigerator from

being turned off accidentally.

Electrical information

Safety

WARNING

You must follow these guidelines to ensure that

your refrigerator’s safety mechanisms are operating

correctly.

IMPORTANT

To turn off power to your refrigerator, unplug the power

cord from the wall outlet.

IMPORTANT

CFC/HCFC DISPOSAL

Your old refrigerator may have a cooling system

that used CFCs or HCFCs (chloroﬂ uorocarbons or

hydrochloroﬂ uorocarbons). CFCs and HCFCs are believed

to harm stratospheric ozone if released to the atmosphere.

Other refrigerants may also cause harm to the environment

if released to the atmosphere.

If you are throwing away your old refrigerator, make

sure the refrigerant is removed for proper disposal by a

qualiﬁ ed technician. If you intentionally release refrigerant,

you may be subject to ﬁ nes and imprisonment under

provisions of environmental legislation.

Feature Overview

Understanding features and terms

Your refrigerator is designed for optimal convenience and storage ﬂ exibility. The illustration below is provided to assist you

with familiarizing yourself with product features and terminology.

NOTE

Features may vary according to model. Model is shown without freezer drawer cover.

Wire Tilt-Out Shelf

(inside freezer drawer)

Toe Grille

Adjustable

Spill-Proof

Shelves

Covered Door Bin

Adjustable

Spill-Proof

Shelves

Freezer Baskets

Temperature

Adjustable Cold

Zone Drawer

Crisper

Drawer

Crisper

Drawer

Water

Filter

Adjustable

Hinges

(select models)

Incandescent Light

(select models)

LED Light

(select models)

Tilt-Out

Bin

Special Items

Rack (inside CTD)

(select models)

LED Light

Flipper Guide

Flipper

Mullion

Air Filter

Ice

Maker

Ice

Bucket

IMPORTANT

Features not included with your refrigerator can be purchased at www.vikingrange.com in the US or

brigade.ca in Canada or by calling 1-888-845-4641.

This Use & Care Guide provides general installation and

operating instructions for your model. We recommend using

a service or kitchen contracting professional to install your

refrigerator. Use the refrigerator only as instructed in this Use

& Care Guide.

Before starting the refrigerator, follow

these important ﬁ rst steps.

Location

• Choose a place that is near a grounded, non-GFCI,

electrical outlet.

Do Not use an extension cord or an

adapter plug.

• If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher, or other heat

sources.

• The refrigerator must be installed on a ﬂ oor that is

level and strong enough to support a fully loaded

refrigerator.

• Consider water supply availability for models

equipped with an automatic ice maker.

Installation

• Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides & Top

⅜ inch (9.5 mm)

Back 1 inch (25.4 mm)

Door opening

Installation

Your refrigerator should be positioned to allow easy access to

a counter when removing food. For best use of refrigerator

drawers and freezer baskets, the refrigerator should be in a

position where both can be fully opened.

Guidelines for ﬁ nal positioning of

your refrigerator

• All four corners of the cabinet must rest ﬁ rmly on the

ﬂ oor.

• The cabinet should be level at the front and rear.

• The sides should tilt ¼ inch (6 mm) from front to back

(to ensure that doors close and seal properly).

• Doors should align with each other and be level.

Most of these conditions can be met by raising or

lowering the adjustable front rollers.

CAUTION

DO NOT install the refrigerator where the

temperature will drop below 55°F (13°C) or rise

above 110°F (43°C). The compressor will not be

able to maintain proper temperatures inside the

refrigerator.

DO NOT block the toe grille on the lower front

of your refrigerator. Sufﬁ cient air circulation

is essential for the proper operation of your

refrigerator.

NOTE

If your refrigerator is placed with the door hinge against a

wall, you may have to allow additional space so the door

can be opened wider.

NOTE

The refrigerator doors are designed to shut by themselves

within a 20 degree opening.

Required Tools

You will need the following tools:

Installation

Level Refrigerator & Adjust Doors (if

necessary)

Guidelines for ﬁ nal positioning of your refrigerator:

• All four corners of the cabinet must rest ﬁ rmly on the

ﬂ oor.

• The sides should tilt

¼ inch (6 mm) from front to back

(to ensure that doors close and seal properly).

• Doors should align with each other and be level.

Most of these conditions can be met by raising or

lowering the adjustable front rollers.

To level the cabinet using the front rollers:

1 Slightly open freezer drawer.

2 Remove the toe grille (follow the illustrations below for

the toe grille on your model).

Figure 1: Remove screws and then gently pull forward.

Figure 2: Lift the toe grille and gently pull forward.

3 You can raise or lower each door. Use a ⅜ inch socket

wrench to turn the adjustment screws (one per side).

To raise: turn adjustment screw clockwise.

To lower: turn adjustment screw counterclockwise.

4 Ensure both doors are bind-free with their seals touching

the cabinet on all four sides and that cabinet is stable.

5 After unit is leveled, lower anti-tip leg until it contacts the

ﬂ oor.

6 Install the toe grille by ﬁ tting into place (replacing screws

on some models).

Remove

Mounting

Screws

Shoulder

Screw

Clip

Shoulder

Screws

Toe

Grille

Raise

Lower

Anti-tip

Leg

Door

CAUTION

Do Not loosen or remove these (3) hex head

screws.

DO NOT

Loosen

Remove

These 3

Hex

Screws

Installation

To adjust the door stop:

Door stop is adjustable between 85 to 145 degrees.

1 Open door to provide access to screw.

2 Loosen screw.

3 Adjust door to desired location.

4 Rotate door stop until it makes contact with the lower

hinge.

5 Re-tighten screw.

Open

Door

Degrees

Bottom of Door

6 Ensure door stops in desired location before resuming

normal use.

To level the doors using the adjustable lower hinge

(select models):

1 Remove all food items from door bins on door being

adjusted.

2 Open doors to 90 degrees.

Adjusting Door

Re-tighten Screw

NOTE

View shown is looking up at the bottom of the refrigerator

door.

Adjustable Door Stop

NOTE

Adjustable hinge should only be used after doors have

been leveled with rollers.

Installation

Adjusting Flipper Mullion Screw

To adjust the ﬂ ipper mullion:

Loosen the screw located on the ﬂ ipper mullion hinge.

2 Adjust ﬂ ipper mullion height. For proper connection

with the ﬂ ipper mullion guide, there should be a

separation about the thickness of a coin (0.060 inches,

or 1.5 mm) between the guide and ﬂ ipper mullion.

3 Re-tighten screw.

3 Lift the door while adjusting the washer. To raise the

door, rotate washer clockwise (when viewed from

the bottom). To lower door, rotate washer counter-

clockwise (when viewed from the bottom).

Adjusting Flipper Mullion Height

Raising/Lowering Door

Lower

Door

Hinge

Washer

Raise

Door

Removing the Doors

Once both doors are in place, ensure they are aligned with

each other and level (please see the “Installation” section for

more details), and replace the top hinge cover.

CAUTION

Be sure doors are set aside in a secure position

where they cannot fall and cause personal injury, or

damage to the doors or handles.

To remove the refrigerator doors:

1 Trace lightly around the door’s top hinges with a

pencil. This makes reinstallation easier.

2 Disconnect the harness by grasping both sides of the

connector ﬁ rmly, depress the latch, and pull apart.

Remove the two screws from the top hinge. Lift the

door off of the bottom hinge and set it aside.

3 Unscrew the three lower hinge screws and hinge if

Lower Hinge Removal

necessary.

Getting through narrow spaces

If your refrigerator will not ﬁ t through an entrance area,

before installing the door handles, you can remove the

doors. Check ﬁ rst by measuring the entrance.

To prepare for removing the doors:

1 Make sure the electrical power cord is unplugged

from the wall outlet.

2 Open the freezer drawer and remove the toe grille

(see “Installation” section).

3 Remove any food from the door shelves and close the

doors.

To remove the top hinge covers:

1 Remove the two screws from each cover over the top

door hinges.

2 Lift inside edge of hinge cover and tilt back.

NOTE

DO NOT remove the ground screw from hinge.

To reinstall the right door, reverse the above steps.

Removing the Doors

Installing the Door Handles

1 There are 6 handle studs on the refrigerator.

2 Slide handle endcaps over door stud.

3 Tighten the set screw. There are 2 set screws per

handle assembly.

4 Repeat with all 3 handle assemblies.

Removal and Installation of lower

Freezer Drawer

Removing Freezer Drawer:

1 Remove (4) hex head drawer screws.

2 Lift up drawer to remove.

CAUTION

Drawer is heavy. Use caution when lifting

Remove

Hex Head

Drawer Screw

DO NOT

Remove

Other

Screws

DO NOT

Loosen

Remove

These 3

Hex

Screws

Replacing Freezer Drawer:

1 Lower drawer back into place.

2 Replace (4) hex head drawer screws and tighten.

Connecting the Water Supply

Before Installing The Water Supply Line, You Will Need:

• Basic Tools: adjustable wrench, ﬂ at-blade screwdriver,

and Phillips

screwdriver

• Access to a household cold water line with water

pressure between 30 and 100 psi.

• A water supply line made of ¼ inch (6.4 mm) OD,

copper or stainless steel tubing. To determine the

length of tubing needed, measure the distance from

the ice maker inlet valve at the back of the refrigerator

to your cold water pipe. Then add approximately 7 feet

(2.1 meters), so the refrigerator can be moved out for

cleaning (as shown).

• A shutoff valve to connect the water supply line to

your household water system. DO NOT use a self-

piercing type shutoff valve.

• Do not reuse compression ﬁ tting or use thread seal

tape.

• A compression nut and ferrule (sleeve) for connecting a

copper water supply line to the ice maker inlet valve.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn

ON water supply and ﬂ ush supply line until water is clear.

Turn OFF water supply at shutoff valve.

3. Remove plastic cap from water valve inlet and discard

cap.

If you use copper tubing - Slide brass compression nut,

then ferrule (sleeve) onto water supply line. Push water

supply line into water valve inlet as far as it will go (¼ inch

/ 6.4 mm). Slide ferrule (sleeve) into valve inlet and ﬁ nger

tighten compression nut onto valve. Tighten another half

turn with a wrench; DO NOT over tighten. See Figure 1.

If you use stainless steel tubing - The nut and ferrule

are already assembled on the tubing. Slide compression

nut onto valve inlet and ﬁ nger tighten compression nut

onto valve. Tighten another half turn with a wrench; DO

NOT over tighten. See Figure 2.

5. With steel clamp and screw, secure water supply line (copper

tubing only) to rear panel of refrigerator as shown.

6. Coil excess water supply line (copper tubing only),

about 2½ turns, behind refrigerator as shown and

arrange coils so they do not vibrate or wear against

any other surface.

7. Turn ON water supply at shutoff valve and tighten any

connections that leak.

8. Reconnect refrigerator to electrical power source.

9. To turn ice maker on, lower wire signal arm (freezer ice

maker) or set the ice maker’s On/Off power switch to the

“On” position (fresh food ice maker).

Figure 2

Copper water line

from household water supply

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

Ferrule

(Sleeve)

Copper

water line

Water Valve

Valve Inlet

Water Valve

Bracket

Steel

Clamp

Plastic Water Tubing

to Ice Maker

Fill Tube

Brass

Compression

Nut

WARNING

To avoid electric shock, which can cause death or

severe personal injury, disconnect the refrigerator

from electrical power before connecting a water

supply line to the refrigerator.

CAUTION

To Avoid Property Damage:

• Copper or Stainless Steel braided tubing is

recommended for the water supply line. Water supply

tubing made of ¼ inch plastic is not recommended to

be used. Plastic tubing greatly increases the potential

for water leaks, and the manufacturer will not be

responsible for any damage if plastic tubing is used

for the supply line.

• DO NOT install water supply tubing in areas

where temperatures fall below freezing.

• Chemicals from a malfunctioning softener

can damage the ice maker. If the ice maker is

connected to soft water, ensure that the softener

is maintained and working properly.

IMPORTANT

Ensure that your water supply line connections comply with

all local plumbing codes.

NOTE

Check with your local building authority for recommendations

on water lines and associated materials prior to installing your

new refrigerator. Depending on your local/state building codes,

Viking Range, LLC recommends for homes with existing valves

its water line kit 054414-000 (with a 6 ft. Stainless Steel Water

Line) and for homes without an existing valve, Viking Range, LLC

recommends its water line kit 054415-000 (with a 20 ft. Copper

Water Line with self-tapping saddle valve). Please refer to www.

vikingrange.com for more information.

IMPORTANT

After connecting the water supply, refer to “How to Prime

the Water Supply System” for important information about

priming an empty water supply system.

Your refrigerator’s water supply system includes

several tubing lines, a water ﬁ lter, a water valve, and a

water tank. To ensure that your water dispenser works

properly, this system must be completely ﬁ lled with

water when your refrigerator is ﬁ rst connected to the

household water supply line.

Figure 1

Controls

An indicator light will be illuminated above most active features.

Touch the icon to activate the options below.

fast freeze Activates a faster rate for freezing food.

fast ice Increases the production of ice.

energy saver Keep this switch set on energy saver (light on) for lowest energy usage. If

moisture appears on the cabinet between the doors, pressing this button will

turn the light off and enable an electric heater used to reduce moisture on the

cabinet between the doors.

water ﬁ lter Press and hold for three seconds to reset after ﬁ lter change.

air ﬁ lter Filter condition status is always displayed when door is open. Press and hold

for three seconds to reset after ﬁ lter change.

temp mode Touch to toggle display from Fahrenheit to Celsius.

mute sounds Tones emitted by each key press can be turned off based on user preference.

The sounds are muted when the red indicator is lit. Warning signals will stay

active.

default settings Resets all refrigerator settings such as temp, temp display and tones to their

factory default settings.

on off Press and hold for three seconds to turn off the cooling system to clean the

refrigerator. It also turns off the ice maker. The temperature displays will read

OFF.

IMPORTANT

Pressing the power on/off icon does not turn off power to your refrigerator. You must

unplug the power cord from the wall outlet.

Setting cooling temperatures

Press the + or – indicator to adjust the temperature to the desired setting. The temperature dis-

play will begin to blink with the ﬁ rst touch. The display will time out after 10 seconds and return

to the basic display.

Alarms

Door Ajar If the door has been left open for an extended period of time, an alarm will

sound and the door ajar indicator will display on the bottom display of the

control panel. The alarm is turned off by closing the door. The mute sounds

key will blink to prompt the reset of any active alarms. Press this key to reset

any system alarms.

High Temp In the event of a high temperature condition, the temperature display will blink

and display “HI”. After 20 minutes, the alarm will sound and the high temp

indicator will be red on the bottom of the control panel. The mute sounds

icon will illuminate until pressed, acknowledging the alarm, at which time the

highest temperature reached will be displayed and the refrigerator will resume

normal operation. In case the high temp alarm is not acknowledged at the ﬁ rst

alarm sound time out, when the door is ﬁ rst opened, the alarm sound will be

repeated.

Power Fail In the event of a power failure, the power fail alert will be displayed and the

temperature display will blink until the mute sounds icon is pressed, acknowl-

edging the alarm. Other modes may be turned off until the alarm is acknowl-

edged. The power fail alert is turned off and the refrigerator will resume

normal operation. The high temp alarm may also be illuminated until a safe

operating range temperature has been reached.

TruTouch Controls

The Sabbath Mode is a feature that disables portions of the

refrigerator and its controls in accordance with observance

of the weekly Sabbath and religious holidays within the

Orthodox Jewish community.

Sabbath Mode is turned ON and OFF by pressing and

holding the freezer temp

“-” and the refrigerator temp “+”

indicators for ﬁ ve seconds. The display shows “Sb” while in

Sabbath mode.

In the Sabbath Mode, the High Temp alarm is active for

health reasons. For example, if the door is left ajar the

High Temp alarm is activated. The refrigerator will function

normally once the door is closed, without any violation of the

Sabbath/Holidays. The High Temp alarm is permitted when

cabinet temperture is outside the safe zone for 20 minutes.

The alarm silences itself after 10 minutes while the High

Temp icon stays lit until the Sabbath mode is exited.

For further assistance, guidelines for proper usage and a

complete list of models with the Sabbath feature, please visit

the web at

http:\\www.star-k.org.

Sabbath Mode

NOTE

During Sabbath Mode, the ice maker is turned off by main

control board.

NOTE

While in Sabbath Mode, neither the lights nor the control

panel will work until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after power failure

recovery. It must be deactivated with the buttons on the

control panel.

Sabbath Mode and the Temperature Adjustable Cold

Zone Drawer

The Temperature Adjustable Cold Zone Drawer should be

turned off for the Sabbath/Holidays. Before putting the

refrigerator into the Sabbath mode, turn the Cold Zone

drawer off by pressing the drawer

on/off button. The

display will show “OFF” and the drawer will turn off. Then

enter the Sabbath mode function on the main refrigerator

display. See the “TruTouch Sabbath Mode” section. When in

Sabbath mode, the display will not illuminate and the drawer

will remain off. The drawer can still be used as a non-temp

controlled drawer in this mode. When the refrigerator is taken

out of Sabbath mode, the Cold Zone drawer will have to be

turned back on.

NOTE

If the Temperature Adjustable Cold Zone Drawer

is not turned off prior to putting the unit into Sabbath

Mode, it will continue to adjust itself to maintain the set

point even if the display does not illuminate to show that

it is still on.

Automatic Ice Maker

Ice maker operation & care

After the refrigerator is installed properly, the ice maker can

produce ice within 24 hours. It can completely ﬁ ll an ice bin

in about three days.

When using the ice maker for the ﬁ rst time and in order

for the ice maker to work properly, it is necessary to clear

air from water ﬁ lter tubing. Once ice maker begins making

ice, allow the bucket to ﬁ ll completely, then discard the ﬁ rst

TWO FULL buckets of ice. It will take at least two days to

completely ﬁ ll the bucket on regular ice making mode or 1

days on fast ice mode.

The ice maker produces approximately four pounds of ice

every 24 hours depending on usage conditions.

IMPORTANT

Your ice maker is turned on at the factory so it can work as

soon as you install your refrigerator. If you cannot connect

a water supply, lift the ice maker’s wire signal arm to turn it

off. Otherwise, the ice maker’s ﬁ ll valve may make a loud

chattering noise when it attempts to operate without water.

Turning the ice maker on and off

Ice production is controlled by lifting/lowering the ice maker’s

wire signal arm. To gain access to the ice maker, pull the

freezer drawer out. Lift the wire signal arm to turn the ice

maker OFF and lower the wire signal arm to turn it ON.

Ice maker tips

• If your refrigerator is not connected to a water supply

or the water supply is turned off, turn off the ice maker

by lifting wire signal arm.

Cleaning the ice maker

Clean the ice maker and ice bin at regular intervals, especially

prior to vacation or moving.

1 Turn off the ice maker.

2 Remove the ice bin.

3 Empty and carefully clean the ice bin with mild

detergent. Do not use harsh or abrasive cleaners.

Rinse with clean water.

4 Allow the ice bin to dry completely before replacing in

the freezer.

5 Replace the ice bin. Turn the ice maker on.

Remove and empty the ice bin if:

• An extended power failure (one hour or longer) causes

ice cubes in the ice bin to melt and freeze together.

Remove the ice bin and shake to loosen the cubes or clean

as explained above.

CAUTION

If the water supply to your refrigerator is softened,

be sure the softener is properly maintained.

Chemicals from a water softener can damage the ice

maker.

CAUTION

NEVER use an ice pick or similar sharp instrument to

break up the ice. This could damage the ice bin.

To loosen stuck ice, use warm water. Before

replacing the ice bin, make sure it is completely dry.

• The following sounds are normal when the ice maker

is operating:

- Motor running

- Ice dropping into ice bin

- Water valve opening or closing

- Running water

• Ice cubes stored too long may develop an odd ﬂ avor.

Empty the ice bin as explained below.

Fast Ice Function

Your refrigerator is equipped with a Fast Ice Function, that

will, if activated at your user interface, allow an increase in ice

production. You do not need to deactivate it, if not needed,

your refrigerator will operate on normal conditions.

Storage Features

Your refrigerator includes glass shelves that are designed to

catch and hold accidental spills.

You can easily adjust shelf positions in the fresh food

compartments to suit your needs. The shelves have mounting

brackets that attach to slotted supports at the rear of each

compartment.

To change the position of a shelf:

1 Before adjusting a shelf, remove all food.

2 Lift the front edge up and pull the shelf out.

3 Replace by inserting the mounting bracket hooks into

the desired support slots.

4 Lower the shelf and lock into position.

Crispers

Crisper drawers are designed for storing fruits, vegetables,

and other fresh produce.

CAUTION

To avoid injury from breakage, handle tempered

glass shelves carefully.

NOTE

Features may vary according to model.

Opening Crisper Drawer

Drawers

Your refrigerator includes a variety of storage drawers. These

drawers are located in ﬁ xed positions at the bottom of the

fresh food compartment.

Crisper humidity control

Crisper drawers include a sliding control for adjusting the

humidity inside the crisper. Leafy vegetables keep best when

stored with the Humidity Control set on Higher Humidity.

Fresh fruits keep best when stored with the Humidity

Control set on Lower Humidity.

Adjusting Crisper Humidity

Shelf features

Full Custom-Design

Shelf

Storage Features

Special items

rack

(select models)

The innovative

design of the

special items rack

allows you to

store four bottles

of wine or soft

drink bottles.

Removing Crisper

Drawer

To remove

the Crisper

Drawer for

cleaning:

1 Pull the

drawer

out until

it stops.

2 Lift the

front

slightly

and

remove the drawer.

The Temperature Adjustable Cold Zone Drawer is designed to keep food items at a precise temperature whether cooler,

warmer, or the same as the fresh food section of the refrigerator. The thaw setting holds a temperature for thawing frozen

foods for 12 hours. At the end of that time, it then switches to the mixed items setting to store the thawed food.

Temperature Adjustable Cold Zone Drawer

To operate:

1 To turn on and off, press the drawer’s On/Off button. The

numeric display will show a temperature between “

28°F

and 38°F” when on and “OFF” when off.

2 Press F/C if you prefer to display Fahrenheit “F, ” or

Celsius “

C”.

3 Press either the up  or down  scroll buttons to

illuminate the desired item.

4 Once an option is selected, the drawer will adjust and

maintain the temperature for the setting selected.

5 When turned off, the Cold Zone drawer functions as a

standard meat pan. The Cold Zone drawer is best used

for packaged food products. Leafy vegetables and

unpackaged fruits are best kept in one of the crisper

drawers.

6 The three favorite selections provide ﬂ exibility to set and

store personal temperature selections. The temperature

is adjusted up by pressing the + or – buttons. The

drawer will store the selected temperature setting until it

is changed.

7 The control buttons can be locked to prevent accidental

changes by pressing the

control lock button for three

seconds. Deactivate by pressing for three seconds again.

Opening the Drawer

TEMPERATURE

T E M P E R AT U R E

ADJUSTABLE

A D J U S TA B L E

Storage Features

To remove the Temperature Adjustable Cold Zone

Drawer for cleaning:

1 Pull the drawer out until it stops.

2 Lift the front slightly and remove the drawer.

Removing the Drawer

IMPORTANT

DO NOT clean the display area of the Custom Temp

Drawer with abrasive or caustic cleaners. Wipe clean with a

moist sponge.

CAUTION

The Temperature Adjustable Cold Zone Drawer and

cover can be removed for cleaning but the control

unit, attached to the right side of the fridge, cannot

be removed. Do not immerse the Cold Zone drawer

cover in water or put it in a dishwasher. Clean with a

damp cloth or sponge.

NOTE

When the refrigerator is turned off by pressing the main

TruTouch Conotrol on/off button, the Temperature

Adjustable Cold Zone drawer will also be turned off. When

the refrigerator is turned back on, the Cold Zone drawer

will resume operations at the temp setting that was set

before the refrigerator was turned off.

Doors

Storage bins

The doors to your fresh food compartment use a system of

modular storage bins. All of these bins are removable for

easy cleaning. Some of them have ﬁ xed positions, while

others can be adjusted to your needs.

Door bins are ideal for storing jars, bottles, cans, and

large drink containers. They also enable quick selection of

frequently used items.

Adjustable Door Bin

To change the position of an adjustable door bin:

1 Before adjusting a bin, remove all food.

2 Grip the bin ﬁ rmly with both hands and lift it upward.

3 Remove the bin.

4 Place the bin just above desired position.

5 Lower the bin onto supports until locked in place.

Accessories (varies by model)

Tilt can bins

The can bins allow you to efﬁ ciently and securely store up to

eight 12-ounce canned beverages.

Tilt Can Bin

Covered Door Bin

Use the covered door bin, at the top of the fresh food

compartment door, for short-term storage of cheese, spreads,

or butter. The covered door bin is designed to be warmer than

the open area and includes a lift-up cover that may be locked

and a dairy divider (select models).

Covered Door Bin

Storage Features

Freezer Features

To Remove Upper Basket

1 Remove all items from basket.

2 Remove basket by pulling basket out to its full

extension and lift out.

To reinstall upper basket, position basket onto the retainer

clips making sure the front of the basket rests in the retainer

clips on the stabilizer bar.

Tilt Wire Shelf

The freezer tilt wire shelf (located on the inside of the freezer

drawer) is not designed to be removed.

Dividers Removal

Lift up on the front of the upper divider and pull out.

Basket

Retainer

Removing Lower Basket

To reinstall lower basket, insert basket into retainer clips.

NOTE

If basket is not resting on stabilizer bar retainer clips, the

drawer will not close properly.

Upper Basket Divider

Lower Basket Divider &

Spill Guard Tray

Lift up on the rear of the lower divider and pull out.

NOTE

Spill Guard Tray should be hand washed in warm water.

To Remove Lower Basket

1 Remove all items from basket.

2 Remove the basket by tilting it forward and lifting it

from the retainer clips.

Two Freezer Baskets

Stabilizer Bar

Basket

Retainer

Clips

Ideas for storing foods

Fresh food storage

• Keep the fresh food compartment between 34°F and

40°F with an optimum temperature of 37°F.

• Avoid overcrowding the refrigerator shelves, which

reduces air circulation and causes uneven cooling.

Fruits and vegetables

• Store fruits and vegetables in crisper drawers, where

trapped moisture helps preserve food quality for

longer time periods.

• Wash items and remove excess water.

• Wrap any items that have strong odors or high

moisture content.

Meat

• Wrap raw meat and poultry separately and securely

to prevent leaks and contamination of other foods or

surfaces.

• Use the Temperature Adjustable Cold Zone drawer

and set to meat/poultry setting for short-term storage.

Any meat to be kept longer than two days should be

frozen.

Frozen food storage

• Keep the freezer compartment at 0°F or lower.

• A freezer operates most efﬁ ciently when it is at least

⅔

full.

Packaging foods for freezing

• To minimize food dehydration and quality

deterioration, use aluminum foil, freezer wrap, freezer

bags, or airtight containers. Force as much air out

of the packages as possible and seal them tightly.

Trapped air can cause food to dry out, change color,

and develop an off-ﬂ avor (freezer burn).

• Wrap fresh meats and poultry with suitable freezer

wrap prior to freezing.

• Do not refreeze meat that has completely thawed.

Loading the freezer

• Prior to grocery shopping, activate “fast freeze”

so that on your return you can ensure your newly

purchased food designated for the freezer will be

preserved as quickly as possible.

• Activating “fast freeze” also will help your freezer

more efﬁ ciently maintain the selected temperature

after placing new purchases with pre-existing frozen

foods.

• Avoid adding too much warm food to the freezer at

one time. This overloads the freezer, slows the rate

of freezing, and can raise the temperature of frozen

foods.

• Leave a space between packages, so cold air can

circulate freely, allowing food to freeze as quickly as

possible.

Storing Food and Saving Energy

Ideas for saving energy

Installation

• Locate the refrigerator in the coolest part of the room,

out of direct sunlight, and away from heating ducts or

registers.

• Do not place the refrigerator next to heat-producing

appliances such as a range, oven, or dishwasher. If

this is not possible, a section of cabinetry or an added

layer of insulation between the two appliances will

help the refrigerator operate more efﬁ ciently.

• Level the refrigerator so that the doors close tightly.

Temperature settings

• Refer to the “Controls” section for procedures on

temperature settings.

Food storage

• Avoid overcrowding the refrigerator or blocking cold

air vents. Doing so causes the refrigerator to run

longer and use more energy.

• Cover foods and wipe containers dry before placing

them in the refrigerator. This cuts down on moisture

build-up inside the unit.

• Organize the refrigerator to reduce door openings.

Remove as many items as needed at one time and

close the door as soon as possible.

• Do not place a hot container directly on a cold shelf.

Remember, such an extreme temperature change may

damage the glass.

Page is loading ...

Viking RVRF3361SS Owner's manual

Brand: Viking

Model: RVRF3361SS

Category: Side-by-side fridge-freezers

Type: Owner's manual

Download PDF

report

Viking RVRF3361SS Owner's manual

Viking RVRF3361SS Owner's manual

Related papers

Other documents