Biamp DJ 5001 User manual

Category
Audio mixers
Type
User manual

This manual is also suitable for

Biamp DJ 5001 is a complete DJ control center, designed primarily for live mixing using turntables, tape machines, audio signals from video equipment, and compact digital disc players as signal sources. The 5001 can accommodate three stereo phono sources and six stereo line level sources for a total of nine stereo inputs. The four program channels can be grouped together with Channels 1 & 2 sharing a three band equalizer and applied to the left side of the crossfader control. Channels 3 & 4 share a three band equalizer section and are applied to the right side of the crossfader control.

Biamp DJ 5001 is a complete DJ control center, designed primarily for live mixing using turntables, tape machines, audio signals from video equipment, and compact digital disc players as signal sources. The 5001 can accommodate three stereo phono sources and six stereo line level sources for a total of nine stereo inputs. The four program channels can be grouped together with Channels 1 & 2 sharing a three band equalizer and applied to the left side of the crossfader control. Channels 3 & 4 share a three band equalizer section and are applied to the right side of the crossfader control.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Biamp DJ 5001 User manual

Category
Audio mixers
Type
User manual
This manual is also suitable for

Biamp DJ 5001 is a complete DJ control center, designed primarily for live mixing using turntables, tape machines, audio signals from video equipment, and compact digital disc players as signal sources. The 5001 can accommodate three stereo phono sources and six stereo line level sources for a total of nine stereo inputs. The four program channels can be grouped together with Channels 1 & 2 sharing a three band equalizer and applied to the left side of the crossfader control. Channels 3 & 4 share a three band equalizer section and are applied to the right side of the crossfader control.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI