A3纸大小、175g双铜、正反面印刷、满版光油
Website:www.roomyroc.com
Customer service:[email protected]
TEL:+86 755 89584859
3.Product parameters
4.Attention
Product name: Multi-function desk Tabletop support material: Aluminium alloy
Product weight: 15KG Tabletop size: 680MM*305MM*12MM
The method of up and down: Pneumatic rod Tabletop material: Solid Wood
Up and down range: 670MM~1070MM Tabletop adjustment range: Plus or minus 20 degrees When level
Product size: 730MM*700MM*1070MM Footrest size: 570MM*290MM*60MM
Package size: 768MM*720MM*160MM Footrest material: PU leather fabric
1. When you adjust the height of the desk, please watch your hands. Stay away from the cylinder to prevent pinch-
ing your fingers.
2. When you press the round button on the tabletop, please push the tabletop up or down slightly with your hands.
Avoid the tabletop hinge so you don’t hurt yourself.
5.Instructions for use
1. Height adjustable: Push the round button on the tabletop with
your hands to adjust the desk height that suits you well. You need
to press the round button and at the same time push the tabletop
down slightly, with which the height will be lowered down. You can
raise and lower the height to your preference by pushing the round
button accordingly.
2.Tabletop angle adjustable: Rotate the connecting sleeve clock-
wise or counterclockwise. So the tabletop can be easy flipped to
the range of -20 to 20 degrees for a better view.
3. Footrest adjustable: The footrest is adjustable to 360 degrees
rotation. So you can also alter the angle of the footrest to your
preference.
4. Locked trolley wheels: Wherever you need to go within your
home or office, your multi-function desk can follow. Move the desk
to any desired location and easily lock the 5 trolley wheels by
pressing the tappet switch down and to unlock raise the tappet
switch up.
5.Product usage: Suitable for your office as an office desk, at
home, workshop, classroom, flea market, lectern and conference
hall.
tappet
switch
RoomyRoc Multi-function desk installation instructions
1.Product accessories
2.Installation instructions
Slot and the screw
correspondence
Slot and convex position
correspondence
button
PLEASE NOTE:
If there is not enough threaded rod extending below the counter
weight at the bottom,please unscrew the rod a little at the top to
give you enough length for the nut and washers.
Trolley wheels
Trolley wheels
NameItem Quantity
NameItem Quantity NameItem QuantityNameItem QuantityNameItem QuantityNameItem QuantityNameItem Quantity
NameItem QuantityNameItem QuantityNameItem QuantityNameItem QuantityNameItem Quantity
Adjustable fixing ring
Adjustable fixing
ring
Taper block
Taper block
Five-star feet
Five-star feet
Seamless steel tube
Seamless steel
tube
Footrest stand
Footrest stand
Adjustment
module
Adjustment
module
Counter weight
Counter weight
Tabletop
Tabletop
Screw M6X30
Screw M6X30
Threaded rod
Threaded rod
NameItem Quantity
The sleeve
The sleeve
NameItem Quantity
5mm Hexagon wrench
5mm Hexagon
wrench
NameItem Quantity
Spring washer M10
Spring washer
M10
NameItem Quantity
Flat washer M10
Flat washer M10
NameItem Quantity
Nut M10
Nut M10
NameItem Quantity
Screw M6X20
Screw M6X20
Footrest
Footrest
5
1
4
1
1
2
1
1
1
1
1
1
1
1
1
1
4
1
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
APRILIA scarabeo 200 i.e. Service Station Manual
-
Rittal Perforex BC 1007 Owner's manual
-
-
MOTO GUZZI BELLAGIO Service Station Manual
-
-
-
-
-
-
KTM 450 SMR 2008 User manual