Page is loading ...
Connecting Tablo to Wi-Fi with PC
Once you have taken your Tablo out of the box and you have attached the power, antenna and
hard drive, you are ready to set up Tablo via Wi-Fi.
Begin by opening your Chrome browser and navigating to the web app.
You will be taken to the main ‘Connect to Tablo’ screen. Select 'Add via Wi-Fi'.
The next screen will instruct you to connect to your Tablo’s network.
To do this, navigate to your PC's list of available networks. This is usually near the bottom right
corner of the screen on the toolbar.
Your Tablo will appear in the Wi-Fi list. To connect to your the Tablo's WiFi network, select it
from the list.
Once you have connected to your Tablo’s Wi-Fi network, return to the Tablo app. It will prompt
you to select your home network and enter the password.
Once you have typed in your password, select 'Connect'.
From here, you can begin formatting your hard drive, scanning for channels, and using your
Tablo!
Connecting Tablo to Wi-Fi with Android
Once you have taken your Tablo out of the box and you have attached the power, antenna and
hard drive, you are ready to set up Tablo via Wi-Fi.
Begin by downloading the Tablo app from the Google Play Store, then open the Tablo app on
your iPad.
When you open the Tablo app, you will be taken to the main ‘Add a new Tablo’ screen.
Select 'Add via Wi-Fi'.
Tap 'Continue' on the prompt that appears.
The next screen will instruct you to connect to your Tablo’s network.
To do this, exit from the Tablo app and navigate to the Settings screen.
Select Wi-Fi under the settings menu. Your Tablo will appear in the Wi-Fi list. To connect to
your the Tablo's WiFi network, select it from the list.
Once you have connected to your Tablo’s Wi-Fi network, return to the Tablo app.
It will prompt you to select your home network and enter the password.
Once you have typed in your password, select 'Join'.
From here, you can begin formatting your hard drive, scanning for channels, and using your
Tablo!
Connecting Tablo to Wi-Fi with iPad
Tablo Support - David
July 05, 2017 21:20
Follow
Once you have taken your Tablo out of the box and you have attached the power, antenna and
hard drive, you are ready to set up Tablo via Wi-Fi.
Begin by downloading the Tablo app from the App store, then open the Tablo app on your iPad.
You will be taken to the main ‘Add a new Tablo’ screen. Select 'Add via Wi-Fi'.
The next screen will instruct you to connect to your Tablo’s network.
To do this, exit from the Tablo app and navigate to the iOS Settings screen.
Select Wi-Fi under the settings menu.
Your Tablo will appear in the Wi-Fi list. To connect to your the Tablo's WiFi network, select it
from the list. A check mark will confirm that you have successfully connected to it.
Once you have connected to your Tablo’s Wi-Fi network, return to the Tablo app. It will
prompt you to select your home network and enter the password.
Once you have typed in your password, select 'Join'.
From here, you can begin formatting your hard drive, scanning for channels, and using your
Tablo!
You will be taken to the main ‘Add a new Tablo’ screen. Select 'Add via Wi-Fi'.
The next screen will instruct you to connect to your Tablo’s network.
To do this, exit from the Tablo app and navigate to the iOS Settings screen.
Select Wi-Fi under the settings menu.
Your Tablo will appear in the Wi-Fi list. To connect to your the Tablo's WiFi network, select it
from the list. A check mark will confirm that you have successfully connected to it.
Once you have connected to your Tablo’s Wi-Fi network, return to the Tablo app. A list of
detected networks will be displayed. Scroll to the bottom and select 'Other'.
Enter the the hidden SSID name and password and select Join.
Once you have typed in your password, select 'Join'.
From here, you can begin formatting your hard drive, scanning for channels, and using your
Tablo!
/
