2. EZVIZ
  3. Outdoor 1080p Security Camera Surveillance Strobe Light & Siren IP66 Weatherproof 100ft Night Vision 2.4G Wi-Fi/Wired Two-Way Audio Works
Outdoor 1080p Security Camera Surveillance Strobe Light & Siren IP66 Weatherproof 100ft Night Vision 2.4G Wi-Fi/Wired Two-Way Audio Works

EZVIZ Outdoor 1080p Security Camera Surveillance Strobe Light & Siren IP66 Weatherproof 100ft Night Vision 2.4G Wi-Fi/Wired Two-Way Audio Works, 3216558956, 3216560178, 3216563291, 3216564269, 855639, 8595757130, Indoor Security Camera 1080p FHD Motion Alert Night Vision Baby/Pet/Elder Monitoring 135° Wide Angle 2.4G Wi-Fi 2-Way Audio Smart Home IPC Works, Indoor Security Camera 1080p Motion Alert Night Vision Baby/Pet/Elder Monitoring 135° Wide Angle 2.4G Wi-Fi 2-Way Audio Smart Home System Works, Outdoor Security Camera Surveillance IP66 Weatherproof 100ft Night Vision Strobe Light & Siren Alarm 2.4G Wi-Fi/Wired Two-Way Audio Works User guide

  • Hello! I am an AI chatbot trained to assist you with the EZVIZ Outdoor 1080p Security Camera Surveillance Strobe Light & Siren IP66 Weatherproof 100ft Night Vision 2.4G Wi-Fi/Wired Two-Way Audio Works User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
How to set up with App 3.8
（Android phones can skip Step 7-9.)
Connect to your Wi-Fi network(2.4G
supported only).
Download “EZVIZ” App on Appstore or
Google Play.
Plug your camera into a power outlet.
Register using your email or phone number.
If you reset the device, please wait for more
than 10 minutes then try again.
Before Setup:
1. Login your EZVIZ account. 2. Click on the “+” button to add your camera.
3. Scan the QR code on the device label
or on the QSG cover.
4. Wait for retrieving the device information.
5. Click “Connect to a Network” button.
6. Choose your Wi-Fi and input the Wi-Fi
password.(Only 2.4G Wi-Fi is supported.)
7. Click “The device is starting up and
running for the first time” to initialize
the device.
8. Click “Connect” to connect the mobile with
your camera.
9. Join the Wi-Fi naming “EZVIZ_SN#”.
The SN# is on your camera label.
10. Wait for the auto-configuration.
11. The device is ready after simple
setup.
If the configuration is not successful, please
email us at service@ezvizlife.com or contact
us through Amazon. Our tech support would
help troubleshooting.
/