How to set up with App 3.8
Android phones can skip Step 7-9.)
Connect to your Wi-Fi network(2.4G
supported only).
Download “EZVIZ” App on Appstore or
Google Play.
Plug your camera into a power outlet.
Register using your email or phone number.
If you reset the device, please wait for more
than 10 minutes then try again.
Before Setup:
1. Login your EZVIZ account. 2. Click on the “+” button to add your camera.
3. Scan the QR code on the device label
or on the QSG cover.
4. Wait for retrieving the device information.
5. Click “Connect to a Network” button.
6. Choose your Wi-Fi and input the Wi-Fi
password.(Only 2.4G Wi-Fi is supported.)
7. Click “The device is starting up and
running for the first time” to initialize
the device.
8. Click “Connectto connect the mobile with
your camera.
9. Join the Wi-Fi naming “EZVIZ_SN#”.
The SN# is on your camera label.
10. Wait for the auto-configuration.
11. The device is ready after simple
setup.
If the configuration is not successful, please
email us at service@ezvizlife.com or contact
us through Amazon. Our tech support would
help troubleshooting.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8