American Standard 7353801.295 Specification

Category
Sanitary ware
Type
Specification

This manual is also suitable for

© 2016 AS America, Inc.
2/16
TOWNSEND
®
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
MODEL NUMBER:
7353.801 Townsend Widespread
Metal Speed Connect
®
pop-up drain. Metal lever handles.
SUGGESTED SPECIFICATION
Two-handle widespread lavatory faucet shall feature cast brass valve bodies with exible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a metal drain body with
stainless steel cable actuation. Fitting shall be American Standard Model #7353.801.___.
FLEXIBLE
HOSE
FLEXIBLE
HOSE
MOUNTING
SURFACE
14-1/16"
(357 mm)
6-3/4"
(172 mm)
5"
(127 mm)
7-15/16"
(202 mm)
3-7/8"
(99 mm)
4"
(102 mm)
5-3/8"
(137 mm)
8"
(203 mm)
2-1/4"
(57 mm)
1-1/4" MAX.
(32 mm)
1-1/16" DIA.
(29 mm)
1-1/2" MAX.
(38 mm)
6" to 12"
(152 to 305 mm)
FLEXIBLE
1-1/4" OD
(32 mm OD)
2"
(50 mm)
GENERAL DESCRIPTION:
Cast brass valve bodies with exible hose connections
for 6" to 12" (152 mm to 305 mm) installations. 1/4 turn
washerless ceramic disc valve cartridges. Cast brass
spout. Cast brass inlet shanks and 24" stainless steal
braided exible supply hoses with 3/8" compression
connectors. 20 inch (500 mm) long exible stainless
steel drain cable is pre-assembled to faucet body. Metal
Speed Connect
®
drain body with 1-1/4 inch (32 mm)
tail piece. 1.2 gpm/4.5 L/min. maximum ow rate.
PRODUCT FEATURES:
Brass Construction: Durable. Ideal for prolonged
contact with water. Provides the nest surface of application
of colors and nishes.
Cast Brass Valve Bodies: Durable. Ideal for prolonged
contact with water.
Exclusive Speed Connect Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the rst time, every time.
Flexible stainless steel cable - installs effortlessly in
tight spaces.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
© 2016 AS America, Inc.
2/16
TOWNSEND
®
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 and Annex G
CSA B125.1
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
806040200
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Product
Number Description
Finish Options
Polished
Chrome
PVD
Polished
Nickel
Legacy
Bronze
PVD
Satin
Nickel
002 013 278 295
7353.801
Townsend Widespread with Metal Speed Connect
®
pop-up drain. Metal lever handles
  • Page 1 1
  • Page 2 2

American Standard 7353801.295 Specification

Category
Sanitary ware
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI