QTX QTFX-B3 is a lightweight bubble machine with barrel rolling wands that produce an incredible amount of bubbles. It's made from heavy-duty plastic and features a high-quality, low-noise fan. Ideal for events, parties, and mobile discos, it has a high bubble output, an easy-fill and empty tank, and includes a handheld remote control.
QTX QTFX-B3 is a lightweight bubble machine with barrel rolling wands that produce an incredible amount of bubbles. It's made from heavy-duty plastic and features a high-quality, low-noise fan. Ideal for events, parties, and mobile discos, it has a high bubble output, an easy-fill and empty tank, and includes a handheld remote control.
QTFX-B3
MEGA BUBBLE MACHINE
Item ref: 160.560UK
User Manual
Version 2.0
160.560UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Unique to QTX, this lightweight bubble machine features barrel rolling wands which produce an incredible amount of
bubbles. It is made from heavy duty ABS plastic and features a high quality low noise fan. Ideal for events, parties and
mobile discos.
· High bubble output
· High speed fan with low noise
· Made from Lightweight heavy-duty plastic
· Easy fill and empty tank
· Includes handheld remote control
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled inside the housing (other than in the fluid reservoir), stop using immediately, allow unit to dry out
and have checked by qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the
case
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service personnel.
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet
• The IEC inlet has a mains fuse. Only replace the fuse with the same type.
If continually blowing fuses, have the unit checked by qualified service personnel
• This unit must be earthed!
Placement
Caution: This unit must only be used on a flat surface. Do not tilt or move whilst in use
Do not obstruct the front of the machine, fan or vents.
Allow adequate space for refilling the tank and routine maintenance.
Do not position where the fixture will be exposed to rain, extreme temperatures changes, vibration or restricted
ventilation.
Cleaning
• Periodically wipe and/or rinse the fluid reservoir with water to avoid buildup of residue
• Use a soft cloth with a neutral detergent to clean the housing as required
• Clear vents periodically with a soft brush and vacuum cleaner
160.560UK User Manual
Unpacking
Please check the contents to ensure that the product has been received in good condition.
• QTFX B2 bubble machine
• Remote control
• User’s Guide
• IEC mains lead(s)
If you find any accessory is missing or the machine has arrived with any problems,
please contact your local dealer at once.
Do not try to fix this item yourself, as this will invalidate the warranty.
Please keep the original package and invoice for any possible replacement or returned demand.
Recommended fluid
For the QTFX-B2 bubble machine we strongly recommend the following fluid which has been specifically formulated for
the best results.
160.574UK High quality bubble fluid 1 Litre
160.575UK High quality bubble fluid 5 Litre
Rear panel
Operation
1. Place on a flat surface.
2. Connect the wired remote control (2)
3. Pour the contents of the bubble fluid into the front tank so the bubble wands are submerged.
4. Connect the IEC mains plug (3) and switch the power on (1)
5. Press the button on the remote control to switch bubble output on or off
6. After use unplug from the mains and empty the remaining contents back in to the bubble fluid container or
dispose of appropriately.
7. Clean the fluid reservoir before the next use.
Specifications
Power supply
230Vac, 50Hz (IEC)
Power consumption
40W
RPM
30
Fluid capacity
1.8l
Dimensions
340 x 175 x 210mm
Weight
1.2kg
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
1
Power on/off switch
2
Remote control connector
3
Mains inlet IEC and fuse holder
4
Air inlet vent
-
1
-
2
-
3
Qtx QTFX-B3 User manual
- Type
- User manual
- This manual is also suitable for
QTX QTFX-B3 is a lightweight bubble machine with barrel rolling wands that produce an incredible amount of bubbles. It's made from heavy-duty plastic and features a high-quality, low-noise fan. Ideal for events, parties, and mobile discos, it has a high bubble output, an easy-fill and empty tank, and includes a handheld remote control.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Atmotech Bubbler Junior User manual
-
ProSource K-1008-bm User guide
-
American DJ BU-200 User manual
-
QTX Light FX QTFX-2000 User manual
-
Eliminator Lighting BUBBLE STORM LED User manual
-
Avsl qtx ORB-400 User manual
-
CHAUVET DJ Hurricane Bubble Haze User manual
-
-
Chauvet Printer B-550 User manual
-
Chauvet B-250 User manual
