20m(336LEDs per string)
110-240V
110-240V
22m
22m
20m 20m
IP65
IP65
IP65
IP65
24V
24V
24V
24V
24V
24V
receiver
4
connector
MODE
BRIGHTNESS
TIME
The LED Waterproof Rope Light User Guide
Thank you for purchasing our products. For offering you better user
experience, please read the instruction carefully before using this product.
If you meet any problem during the use of the product, please feel free to
contact our team, we will reply you within 24 hours.
1.Please check whether the accessories are complete and whether the
product can be lit up normally before installation and usage.
2.Please do not cut the rope light.
3.To ensure normal work of the product, the tail connector must be connected on
the last string of the rope light.
4.For better installation and using experience, the rope light is designed
extendable. (The extendable rope lights are available in our store.)
5.The power plug is IP44, we suggest it should be put inside. If put outside,
we suggest the power plug should be put into the outdoor weatherproof
outlet cover. Once the power plug exposed to water or rain, the product
may not work.
3 1~8Key:8 Lighting Modes(1.
)
Steady on,
2.In Waves, 3.Sequential, 4.Slo-Glo,
5.Chasing/Flash, 6.Slow Fade,
7.Twinkle/Flash, 8.Combination
Length
LED Quantity
336LED 336LED 336LED 336LED
Remote Control
Input Voltage
Working Voltage
Color
Red, Blue
yellow, green
Warm, White
Red, Blue
yellow, green
Warm, White
Waterproof
Mode
Dimmable
Parameter
Precautions
8 Light Modes
8 Light Modes
8 Light Modes
8 Light Modes
Yes
Yes
Yes Yes Yes
Yes Yes Yes
Dimmable:Brightness+ Brightness-
Timing function : Working for 6
hours will automatically shut down,
and after 18 hours will automatically
turn on.Repeat this every day.
2
1
ON/OFF button
Components and Structure
2m/6.74in
20m(336LEDs per string)
Note: There may be ±1mm discrepancy on the length of the Light.
Installation
General Trouble Shooting
If the product can not light up, please check whether the failure is
caused by the following situation. If all the following solutions do
not work, please stop using it and contact the professionals or
retailers for help.
1.The product does not work, please cut off the power and check whether
the power plug is properly connected with the main supply.
2.If connected properly, please ask the professional to check the input voltage
or other circuit faults.
Routine Maintenance
1.To ensure a lighting performance viewing,please clean the product
regularly,once a year a suggested. Please do not use any liquid directly.
2.To avoid any damage to the product, please do not use chemical
solvent during routine maintenance.
3.Components of the product cannot be replaced.
STEP1
STEP2
STEP1
STEP2
It can be connected with
extendable rope lights.
Plug in,and it lights up.
STEP3
STEP3
The tail connector must be
connected on the end of last string.
3. If the rope light can not light up or the brightness is not uniform , please
check whether the tail connector is connected in the end of the rope light.
6.The product has memory function, which is convenient for setting the
lighting pattern you like. No need to set again when the power is off
or other power outage.
Waterproof Rope Light
Extendable Rope Light
Product Name
3
2
1
4
7.After turning off the power, the product has a residual light, which is a
normal situation.
remote control