Samsung RF260BEAESG User guide

Brand: Samsung

Model: RF260BEAESG

Type: User guide

DEPTH

WITHOUT

DOOR

DEPTH

TO DOOR

HANDLE

WIDTH

(FITS 36" OPENING)

HEIGHT

WITH

HINGE

70"

DEPTH

WITHOUT

HANDLE

DEPTH

WITH DOOR

OPEN

48"

TOP OF REFRIGERATOR WITH DOORS OPEN 90°

140° 140°

TOP OF REFRIGERATOR WITH DOORS OPEN 140°

Be sure your new fridge will fit

Don't wait until delivery to be sure your new refrigerator will t – both

in your kitchen and through all doorways. This guide includes all pertinent

measurements and clearances so you can buy with condence.

25 cu. ft. French Door

MODEL RF263TEAE DIMENSIONS

Measure height

including flooring.

Be sure to allow for

hinge clearance

height if needed.

Measure width

including countertop

overhang.

Measure depth

including molding

or trim.

Walk the delivery route

3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.

3Appliance depth or width must be smaller than the width of the narrowest opening.

Standard-Depth Refrigerator

Standard-depth refrigerators typically measure 30 to 35 inches in depth,

as opposed to counter-depth refrigerators that sit ush with cabinetry.

Installation clearances

3Allow 3.75" of clearance when installing along a wall.

This will allow for the door to open 90 degrees without

the handle contacting the wall.

3Allow 2" minimum clearance at rear for proper air

circulation and water/electrical connections.

3Allow a 3/8" minimum clearance at sides and top

for ease of installation.

For optimal usage and ability to open refrigerator doors

completely, do not install next to a wall.

Please note: The above dimension and cutout information is for planning

purposes only. For complete installation details, consult manual packed

with product, or download manual online at samsung.com.

Samsung RF260BEAESG User guide

Samsung RF260BEAESG User guide

Samsung RF260BEAESG User guide

Related papers

Other documents