simplehuman BT1062 User guide

BT1062
Brand
simplehuman
Model
BT1062
Type
User guide
no
extension
top
extension
bottom
extension
top + bottom
extensions
three lock
tabs
what’s in the box...
top
extension
bottom
extension
top pole with
top foot
three shelves
hanger
main pole
• Snap a lock tab
onto each shelf.
First, assemble the
shelves.
Then slide the shelves
onto the main pole.
slide on the shelves
1
• Flip the tab closed to
lock the shelf into place.
• To attach the hanger,
squeeze the side tabs and
clip it to the main pole.
assemble the main
tension pole
2
With the arrow on the
main pole pointing up,
insert the top pole.
You should feel the
top pole resting on
the spring.
Questions?
120-0014-02
Find answers easily online:
www.simplehuman.com/service
In a few easy steps,
we'll show you how to
assemble your caddy
so it will fit securely
in your shower.
set up
guide
configure for your space
3
7'2" to 8'3" 8'3" to 9'6' to 6'11"
183 to 211 cm 211 to 218 cm 218 to 252 cm 252 to 274 cm
6'11" to 7'2"
bottom
extension
top
extension
• Measure your space
and refer to the chart to
see which extensions
are needed.
• To add an extension,
pull off the foot (if it’s
the top extension),
insert the extension,
and replace the foot.
bottom
extension
top
extension
explore our full bath collection at www.simplehuman.com
mini semi-round step can wall mount pump
adjustable shower caddy
sensor pump bath ensemble
bottom foot
Tip: Be sure to slide the
shelves onto the pole in
your preferred order.
  • Page 1 1

simplehuman BT1062 User guide

BT1062
Brand
simplehuman
Model
BT1062
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents