Sunpak PRO 723P Carbon Fiber Tripod
The Sunpak PRO 723P Carbon Fiber tripod is
focused on the needs for the working
professional photographer using full size DSLR
cameras with large lenses. This is a full size
tripod that offers three leg sections for quick
setup and is the most affordable in its class.
The PRO 723P is constructed of strong, durable,
lightweight carbon fiber legs. Other features
include leg warmers, reversible 1/4”-20 / 3/8”
threaded screw, removable 3-way panhead with
quick release. This tripod comes with a limited
lifetime warranty.
Highlights
ToCAD America Inc. 53 Green Pond Road Rockaway, NJ 07866, USA tocad.com
• Lightweight carbon fiber constructed legs
• Designed for professionals using full size DSLR cameras and long lenses
• Removable 3-way panhead with quick release plate
• Reversible 1/4”-20 / 3/8” threaded screw
• Built-in bubble level
• Neoprene leg wraps
• 3-position leg angle locks for low angle photography
• Second short center column for low level photography
• Retractable leg spikes
• Limited lifetime warranty
Features
Catalog Number
620-723-CFT-P
Specifications
• Weight: 5.3 lb
• Load capacity: 15.4 lb
• Maximum height (center column retracted): 57.6 in
• Maximum height (center column extended): 69.5 in
• Minimum height: 14 in
• Folded length: 26.5 in
• Leg sections: 3
• Leg diameter: 1.1 in
• Leg material: Carbon fiber
• Leg lock type: Twist lock
• Accessories: Padded tripod case with shoulder strap
• Quick Release Catalog Number: 620-746
Product design and specifications subject to change without notice.
/
