AUDIO VIDEO SURROUND RECEIVER
VR-707A
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5420-00 00 MA (K, P) KW 0305
Thank you for purchasing this product. This Receiver you just purchased has been upgraded with new features.
HD (High Definition) Component Video Switching
Video sources with component video outputs (such as DVD players and HDTV tuners) can be connected and
switched to an HD-capable TV or monitor, producing significantly improved video images over conventional NTSC
video.
Upgraded Specifications
VIDEO section
COMPONENT VIDEO inputs /outputs
COMPONENT VIDEO (luminance signal) .............. 1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/CR-signal) ............ ±0.32 Vp-p / 75 Ω
The VR-707A receiver isidentical to the VR-707 except for the features described in this addendum. For all other information
and specifications, please refer to the VR-707 Instruction Manual.
If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than
by connecting to the S-VIDEO jacks.
Connecting video components (COMPONENT VIDEO)
+
-
+
-
CR
CB
Y
DVD IN MONITOR OUT
CR
CB
Y
COMPONENT VIDEO
VIDEO 2 IN
CR IN
CB IN
Y IN
CR OUT
CB OUT
Y OUT
CR OUT
CB OUT
Y OUT
Note: When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks.
*5420/707A 03.7.9, 3:57 PM1
Page is loading ...
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Kenwood VR-707A Manuel utilisateur
Related papers
Other documents
-
Harman 2600 User manual
-
Rotel RSP-1069 Owner's manual
-
-
-
Sherwood SD-871 Owner's manual
-
Sony XBR-65X930C Reference guide
-
Sony STR-DA3200ES Operating instructions
-
Yamaha RX-V765 Owner's manual
-
Yamaha RX-V2065 Owner's manual
-