Sony BETACAM SP 2000 PRO User manual

Brand: Sony

Model: BETACAM SP 2000 PRO

Category: Print & Scan

Type: User manual

This manual is also suitable for

3-753-960-14(1)

Operating Instructions

Before operating this unit, please read this manual thoroughly

and retain it for future reference.

Videocassette Recorder

Model:

PVW-2800P

2000 PRO

WARNING

To prevent fire or shock hazard, do not expose the unit to

rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

Caution

Television programmes, films, video tapes and other

materials may be copyrighted.

Unauthorized recording of such material may be contrary

to the provisions of the copyright laws.

WARNING FOR THE CUSTOMERS IN THE UNITED

KINGDOM

THIS APPARATUS MUST BE EARTHED

IMPORTANT

The wires in this mains lead are coloured in accordance

with the following code:

Green-and-yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

The wire which is coloured green-and-yellow must be

connected to the terminal in the plug which is marked by

the letter E or by the safety earth symbol Y or coloured

green or green-and-yellow.

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured

black.

The wire which is coloured brown must be connected to

the terminal which is marked with the letter L or coloured

red.

For the customers in Canada

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

For the customers in the USA

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

This symbol is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

The shielded interface cable recommended in this manual

must be used with this equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of

FCC Rules.

Sony BETACAM SP 2000 PRO User manual

Sony BETACAM SP 2000 PRO User manual

This manual is also suitable for

Sony BETACAM SP 2000 PRO User manual

Related papers

Other documents