Eizo FDF2304W-IP Owner's manual

Brand: Eizo

Model: FDF2304W-IP

Type: Owner's manual

This manual is also suitable for

FDF4627W-IP

Eizo FDF2304W-IP is a color LCD monitor with advanced features for displaying and managing images from network cameras. With its ability to connect to up to 16 network cameras, it's ideal for use in surveillance, security, and monitoring applications. The monitor offers various screen layout options, allowing you to customize the display to your specific needs. Additionally, it includes a remote control for convenient operation, and supports USB mouse connectivity for menu navigation and control.

Color LCD Monitor

Instruction Manual

Important

Please read this “Instruction Manual”, the “Installation Manual” and

the “Setup Manual” carefully to familiarize yourself with safe and

effective usage.

• For the latest product information including the “Instruction Manual”,

refer to our web site:

http://www.eizoglobal.com

Software Version 4.2

About this manual

Setup Manual

Describes precautions and setup processes from network camera

connection to camera image display.

Instruction Manual

(this manual)

Describes operation of network cameras and live image screen

menus, etc.

Installation Manual

Describes network camera registration and function setup, monitor

system setup, etc.

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Notice for this monitor

Cleaning

The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water.

Attention

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet

or LCD panel, and also quality deterioration of the image.

• Never use thinner, benzine, wax, or abrasive cleaner as they may damage the cabinet or LCD panel surface.

Note

• It is recommended that ScreenCleaner (available as an option) be used to clean the cabinet and LCD panel surface.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor

according to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

CONTENTS

Notice for this monitor ......................................... 3

Cleaning .................................................................... 3

To use the monitor comfortably ............................. 3

CONTENTS ............................................................. 4

Chapter 1 Product overview .............................. 5

1-1. SystemConguration .................................. 5

Chapter 2 Turning On / Off the Power .............. 6

●

To turn on the power ....................................... 6

●

To turn off the power ....................................... 6

Chapter 3 Operating the System ...................... 7

3-1. Remote Control ............................................. 7

3-2. Live Image Screen ........................................ 8

●

Basic menu operations.................................... 9

3-3. Changing Over Screen Layout and

Displayed Pages...........................................12

●

To change over the screen layout ..................12

●

To change over the page displayed on

the screen.......................................................13

3-4. Turning Visibility Optimizer Function On

/ Off ................................................................14

3-5. Controlling Network Cameras ....................15

●

Before operation .............................................15

●

To Operate network cameras .........................16

3-6. Adjusting Screen Brightness .....................18

3-7. To switch among input signals ..................18

Chapter 4 Troubleshooting .............................. 19

4-1. No picture .....................................................19

4-2. Imaging problems ........................................19

4-3. Other problems ........................................... 20

Chapter 1 Product overview

This color LCD monitor can display images from up to 16 network cameras

*1 A type of camera which converts images into network signals and transmits the signals.

1-1. SystemConguration

FDF4627W-IP

Ethernet

Network camera

Network hub

HDMI device

(Network video recorder etc.)

*1 Up to 16 network cameras can be registered.

*2 Use an HDMI device (e.g. network video recorder) if necessary.

Chapter 2 Turning On / Off the Power

●

To turn on the power

Turn on the main power switch on the back of the monitor.

The main power switch is turned on when factory default settings are congured.

Press on the front of the monitor or on the remote control.

The power indicator lights up blue and the live image screen is displayed.

(For details on the live image screen, refer to “3-2. Live Image Screen” (page 8).)

Attention

• By default, it takes approximately one minute for the live image screen to be displayed after the power is turned

on (A rotating bar indicating startup is displayed). Do not turn off the monitor during startup.

• When the monitor is started up for the rst time, a menu for operating the monitor and network cameras is

displayed.

• When no network camera is registered, a “Not Registered” message is displayed at the network camera image

display area.

Note

• The time required to display the live image screen can be reduced (Quick Start) by changing the power-off status.

For details, refer to the Installation Manual.

●

To turn off the power

Press on the front of the monitor or on the remote control.

Attention

• The power indicator ashes blue while the system is shutting down.

• The power-off status differs depending on the “Quick Start” setting. For details, refer to the Installation Manual.

- When set to “On”: Part of the system remains running. (Power Indicator: Red)

- When set to “Off”: The system is shut down completely (default setting). (Power Indicator: OFF)

• When turning off the main power of the monitor, follow the procedure below.

1. If “Quick Start” is set to “On”, change the setting to “Off”.

2. Press

on the front of the monitor or on the remote control to turn off the power.

The system is shut down and the power indicator turns off.

3. Turn off the main power switch.

• Turning off the main power of the monitor before the system completely shuts down may cause equipment

damage.

• Use the remote control within the range illustrated in the diagram below.

20°

30°

• When installing multip le monitors, leave sufcient space between each monitor so that only the intended monitor

will be operated by the remote control. Otherwise, all monitors that receive the remote control signal will operate

accordingly.

Chapter 3 Operating the System

Each menu is operated using the remote control or a USB mouse.

This chapter describes operating the menus using the remote control. To operate menus when using a USB

mouse, refer to each item. For details on connecting a USB mouse, refer to “Basic menu operations” (page 9).

3-1. Remote Control

Name Description

Switches input signals for display.

Turns the power on or off.

Used to display / exit the monitor’s Adjustment menu.

Adjusts the brightness of the monitor screen.

5. Number Buttons

( 0 to 9 ) /

Used to enter numbers and letters.

Adjusts the network camera display magnication.

/ / / ,

Used to set and control (pan / tilt) network cameras, and congure system

settings of the monitor.

Returns to the previous menu status in menu operation.

Changes the live image screen layout.

Each time the button is pressed, the layout changes in the following order:

1 Screen → 3 Screens → 4 Screens → 9 Screens → 16 Screens → 8 Screens →

1 Screen.

10.

Displays / hides the menu of the live image screen.

11.

Turns Visibility Optimizer function on or off.

12.

Turns the sequential display of camera images on or off.

13.

Changes the camera image page to display on the live image screen.

*1 Some remote controls are labeled “Smart”.

Chapter 3 Operating the System

3-2. Live Image Screen

The live image screen is displayed when the monitor is turned on.

There are two states to the live image screen. Live image screen menu can be shown or hidden by

pressing .

Live image screen

(camera images and menu)

Live image screen

(camera images only)

Note

• You can also operate the live image screen from your Web browser. For information on operation from a Web

browser, refer to the Installation Manual.

Chapter 3 Operating the System

●

Basic menu operations

The menu is used for operation and setting of network cameras and the monitor.

Live Image Screen

Network camera image display area

• When no camera is registered, a “Not registered ” message is displayed.

• When an input signal is not supported, the “Unsupport resolution” message is displayed.

Message display area

(Error messages such as on camera operations are displayed.)

Current time

Display mode menu

System setup menu / Camera control menu

Attention

• When sequence display is enabled, the system setup menu and the camera control menu are inoperable.

Note

• The displayed menus can be operated by remote control even if the menus on the live image screen are

hidden.

• When using a USB mouse to operate the menu

- Connect the mouse to the USB downstream port at the back of the monitor.

Chapter 3 Operating the System

Display mode menu

Camera images displayed on the live screen can be operated.

Display mode menu

Remote control

button

Description

Displays / hides the menu of the live image display screen.

Changes the live image screen layout.

Each time the button is pressed, the layout changes in the

following order:

1 Screen → 3 Screens → 4 Screens → 9 Screens →

16 Screens → 8 Screens → 1 Screen.

Turns Visibility Optimizer function on or off.

Turns the sequence display of the camera image (mode

that switches the display page at regular intervals) on or

off.

Changes the camera image page to display on the live

image screen.

*1 Some remote controls are labeled “Smart”.

System setup menu / Camera control menu

The system settings menu is used for logging into and conguring the system.

The camera control menu controls network cameras from the monitor in the camera operation menu.

Item Operation method

To select an item Press the / / / buttons.

To conrm a selected item Press

To change a setting With setting buttons:

Press

. (Excluding zoom in / out and position adjustment)

With list box:

1. Press .

The list box is highlighted in green.

2. Select the setting with

or .

3. Press

To return to the previous menu level

Press .

Note

• When canceling a setting change in process, press .

Chapter 3 Operating the System

Entering characters

1. Press

The text eld is highlighted in green.

2. Press the number buttons ( 0 to 9 ).

Press a button consecutively to change over to the character next in order. For the order of character entry,

refer to the table shown below.

Button Input characters

0 0 - _ : . / (space)

1 1

2 a b c A B C 2

3 d e f D E F 3

4 g h i G H I 4

5 j k l J K L 5

6 m n o M N O 6

7 p q r s P Q R S 7

8 t u v T U V 8

9 w x y z W X Y Z 9

To enter a new character, press

To delete a character, press

3. Press

Note

• Entering network addresses

Network address text elds are separated by [.] (a period mark).

- When a three-digit number is entered, the cursor automatically moves to the next entry position.

- When entering a two-digit or one-digit number, press

to move to the next entry position.

• When using a USB mouse

- When you enter a period “.“, the cursor moves to the next entry position.

- To enter characters, click “Keyboard” on the character entry screen. Then click the keys on the displayed

keyboard to enter characters.

Attention

• The remote control cannot be used to select the character entry screen keyboard.

• The operable range of the menu differs according to the level of the user accessing this product.

There are three user levels: “LIVE”, “CAMERA CONTROL” and “ADMIN”. The range of operation for each

level is shown below.

(√: Operable, -: Inoperable)

Operation

Level

Display mode menu

System setup menu

Camera control menu

LIVE √ √ - -

CAMERA

CONTROL

√ √ - √

ADMIN √ √ √ √

• When the power is turned on and after logoff, the user level is “LIVE”.

• For information on setting user levels, refer to the Installation Manual.

Chapter 3 Operating the System

3-3. Changing Over Screen Layout and Displayed Pages

●

To change over the screen layout

Changes the number of camera images to display on the live image screen.

Procedure

1. Press

on the remote control.

Each time the button is pressed, the screen layout changes over. When using a USB mouse, the screen

layout changes by selecting the display screen layout icon.

Example: When the camera image is 16:9

1 Screen

8 Screens

3 Screens

4 Screens

9 Screens

16 Screens

*1 Display set to the aspect ratio mode “Aspect” when the camera image is 16:9 (For details, refer to section

“2-4. Setting the Camera Image Display Position” in the Installation Manual).

Attention

When displaying the image layout in three screens:

• Only the Axis network camera displays portrait images maintaining their vertical and horizontal image aspect

ratios. To display images, the network camera setting is required. For details on the settings, refer to the

network camera User’s Manual.

Note

• The selected network camera image is displayed in one screen by selecting the live image screen network

camera image and pressing

on the remote control.

Chapter 3 Operating the System

●

To change over the page displayed on the screen

Except for when the screen layout is 16 Screens, camera images are displayed by changing over

pages.

Pages can be changed over either manually or automatically at a set interval (sequential display).

Changing pages manually

Procedure

1. Press

or on the remote control.

Each time the button is pressed, the page displayed on the screen changes over. When using a USB mouse,

select

or in the display menu.

Example: 4 Screens layout

Camera 1 Camera 2

Camera 3 Camera 4

Camera 5 Camera 6

Camera 7 Camera 8

Camera 9

Camera 10

Camera 11 Camera 12

Camera 13 Camera 14

Camera 15

Camera 16

Chapter 3 Operating the System

Changing pages automatically (Sequential display)

Procedure

1. Press

on the remote control.

Pages displayed on the screen are changed over automatically at a specied interval.

Note

• The interval for page changeover can be changed (default setting: 5 sec). For information on how to change

the display interval, refer to the Installation Manual.

• To stop sequential display, press

again.

Attention

• During sequential display, camera control is disabled and the setting screen cannot be displayed. The

sequential display must be stopped in order to operate cameras or display the setting screen. For information

on how to display the setting screen, refer to the Installation Manual.

• Only pages registered for the network camera are displayed in the sequence display. Pages not registered

with the camera will not be displayed.

3-4. Turning Visibility Optimizer Function On / Off

Enable or disable settings of Visibility Optimizer function. Using the Visibility Optimizer function improves

the camera image visibility.

Procedure

1. Press

on the remote control. (

*1 Some remote controls are labeled “Smart”.

)

Each time the button is pressed, Visibility Optimizer function is turned on or off.

Note

• For information on how to congure the Visibility Optimizer function, refer to the Installation Manual.

Chapter 3 Operating the System

3-5. Controlling Network Cameras

●

Before operation

Network camera control is allowed only when the level of the user accessing this product is

“CAMERA CONTROL” or “ADMIN”.

Be sure to log in to the system with a user account of either of these levels.

Procedure

1. Select

(Login) under “System”.

The login screen is displayed.

2. Enter a username and a password.

3. Select “Login”.

The display returns to the live image screen.

4. Press on the remote control.

The system frame is selected (highlighted in green).

Note

• For information on how to enter characters, refer to “Entering characters” (page 11).

• The following user information is set by default:

- Username: “admin”

- Password: “admin”

- User Level: “ADMIN”

• For information on how to congure users, refer to the Installation Manual.

• It is recommended that you log out after completing operations, so as to prevent a third party from operating

the camera or altering the settings.

Attention

• When the monitor power is turned off while the user is logged in, the user is logged out from the system

automatically. In such a case, you will also be logged out from the web browser.

Chapter 3 Operating the System

●

To Operate network cameras

Procedure

1. Select the camera control menu.

1. Press

2. Select the camera control menu using

or , then press

2. Select the network camera to operate.

1. Check that “Camera” is selected and press

2. Select a network camera displayed in the live image screen

using

or , then press . The frame around the

selected camera image become bold.

3. Press

3. Select a function to use.

1. Select a function to use using

or .

2. Press

4. Operate the functions.

Attention

• Depending on the type of the network camera you are using, some functions may not be available.

Note

• To select a network camera to operate, use the numerical buttons on the remote control. Also, click the USB

mouse to select an the image in the live image screen.

• The position at which images in the live image screen are displayed can be changed. For details, refer to the

Installation Manual.

Chapter 3 Operating the System

Brightness / Preset / Focus

Function Detail

Brightness Adjusts the brightness of the network camera.

1. Select the setting button and press

Each time is pressed, the image becomes darker.

Returns the brightness to the default setting.*

Each time is pressed, the image becomes brighter.

Preset Moves the camera orientation to the position registered in advance.

1. Select the “Preset” list box and press

2. Select the preset number with

or and press .

Note

• For information on registering a preset position, refer to the Installation Manual.

• To move the network camera orientation to the home position, select

Focus Adjusts the network camera focus.

1. Select the setting button and press

Each time is pressed, the focus point moves closer.*

Focuses automatically.*

Each time is pressed, the focus point moves farther away.*

*1 Cannot be set if using a network camera for which “Protocol” is “ONVIF” or “AXIS.”

*2 If using a network camera for which “Protocol” is “ONVIF” or “AXIS,” the mode is switched to manual

adjustment mode.

*3 If using a network camera for which “Protocol” is “ONVIF” or “AXIS,” the mode is switched to automatic

adjustment mode.

Zoom / Position

Function Detail

Zoom Adjusts the network camera display magnication.

1. Press

/ .

Zooms out each time is pressed.

Zooms in each time is pressed.

Position Adjusts the shooting position of the network camera.

1. Press

/ / / .

Adjusts the horizontal position (pan).

Adjusts the vertical position (tilt).

Auxiliary Command

Function Detail

Auxiliary

Command

Operates auxiliary functions for the network camera(s).

1. Select the list box for the “Auxiliary Commands”, then press

2. Select the auxiliary command using or , then press .

*1 Auxiliary commands can be operated using only specied devices for which the protocol is “ONVIF” or

“Panasonic”.

Note

• When operating with a USB mouse, the network camera position can be adjusted automatically by clicking on

a position in the image where you wish to set as the center of the image display (only supports Panasonic or

AXIS network cameras equipped with pan, tilt, and zoom functions).

Chapter 3 Operating the System

3-6. Adjusting Screen Brightness

Adjust the brightness of the monitor screen by changing the brightness of the backlight (light source at

the back of the LCD panel).

Adjustable range

0 to 100

Procedure

1. Press

or on the remote control.

The brightness adjustment menu is displayed.

2. Set the brightness with or .

The menu disappears automatically after approximately ve seconds.

3 -7. To switch among input signals

Press on the remote control to change over the input signal.

When the signal is switched, the active input port name appears at the top right corner of the screen.

Note

• on the monitor also can change the input.

Chapter 4 Troubleshooting

4-1. No picture

Problem Possible cause and remedy

1. No picture

• Power indicator does not light.

• Check whether the power cord is connected properly.

• Turn the main power switch on.

• Press

on the front of the monitor or on the

remote control.

• Turn off the main power, and then turn it on again a few

minutes later.

• Power indicator is lighting blue. • Adjust the screen brightness (For details, refer to the

Setup Manual).

• Power indicator is lighting blue. (for HDMI

input)

• Check whether the HDMI cable is connected properly.

• Check whether the connected device is turned on.

• Pull out the HDMI cable and connect it again (For details,

refer to the Setup Manual).

4-2. Imaging problems

Problem Possible cause and remedy

1. The screen is too bright or too dark • Adjust the screen brightness (For details, refer to the

Setup Manual). (The LCD monitor backlight has a limited

life span. When the screen becomes dark or begins to

icker, contact your local EIZO representative.)

2. Afterimages appear • Afterimages are particular to LCD monitors. Avoid

displaying the same image for a long time.

3. Green / red / blue / white dots or defective

dots remain on the screen

• This is due to LCD panel characteristics and is not a

failure.

4. Interference patterns or Pressure marks

remain on the LCD panel

• Switch to the HDMI port and try displaying a white or black

image on full screen. The symptom may disappear.

Chapter 4 Troubleshooting

4-3. Other problems

Problem Possible cause and remedy

1. Operation buttons on the front of the

monitor do not work

• Check whether the operation lock function is active

(For information on how to release the lock, refer to the

Installation Manual).

2. Buttons on the remote control do not work • Check whether the remote control is pointed to the signal

receiving part.

• Check for obstacles between the remote control and the

signal receiving part.

• Batteries are dead.

• Check whether batteries are inserted correctly.

3. The mouse does not work • Check whether the USB cable is connected properly.

• Pull out the USB cable and connect it again.

• Check whether the mouse is directly connected to the

monitor.

4. Remote control or mouse responses lag • Reduce the resolution and / or bit rate set for the network

camera (For details, refer to the Installation Manual).

5. Network camera cannot be operated • The system is not logged in by a user with a camera

operable level (For details, refer to the Installation

Manual).

• Network camera is inoperable during sequential display

(For details, refer to the Installation Manual).

6. USBashdriveisnotrecognized • Check whether the USB ash drive is connected properly.

• Take out the USB ash drive and insert it again.

• Check whether the USB ash drive is directly connected

to the monitor.

Page is loading ...

Eizo FDF2304W-IP Owner's manual

Brand: Eizo

Model: FDF2304W-IP

Type: Owner's manual

This manual is also suitable for

FDF4627W-IP

Download PDF

report

Eizo FDF2304W-IP Owner's manual

This manual is also suitable for

Eizo FDF2304W-IP Owner's manual

Related papers

Other documents