TOA CS-64U User manual

Type
User manual

TOA CS-64U is a wide-range speaker designed for outdoor use, featuring a durable resin enclosure and stainless steel hardware for all-weather resistance. It offers high efficiency and sound quality, combining the weather resistance of horn speakers with the audio clarity of cone speakers. With a 12 cm cone speaker and a rated input of 6W, the CS-64U delivers a frequency response of 130 Hz to 13,000 Hz and a sensitivity of 96 dB (1 W, 1 m). The speaker's input impedance can be adjusted using a rotary switch, allowing it to operate on 70V or 100V lines with various impedance and wattage options.

TOA CS-64U is a wide-range speaker designed for outdoor use, featuring a durable resin enclosure and stainless steel hardware for all-weather resistance. It offers high efficiency and sound quality, combining the weather resistance of horn speakers with the audio clarity of cone speakers. With a 12 cm cone speaker and a rated input of 6W, the CS-64U delivers a frequency response of 130 Hz to 13,000 Hz and a sensitivity of 96 dB (1 W, 1 m). The speaker's input impedance can be adjusted using a rotary switch, allowing it to operate on 70V or 100V lines with various impedance and wattage options.

Thank you for purchasing TOA's Wide Range Speaker.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your equipment.
CS-64UWIDE RANGE SPEAKER
INSTRUCTION MANUAL
1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
After reading, keep this manual handy for future reference.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
• Install the speaker only in a location that can structurally support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the speaker falling down and causing personal injury and/or property
damage.
• Do not stand or sit on, nor hang down from the speaker as this may cause it to drop, resulting in personal
injury and/or property damage.
Do not operate the speaker for an extended period of time with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate and result in a fire.
3. APPEARANCE AND DIMENSIONS 4. WIRING DIAGRAM
233
224
205
210
35
ø13
51 51
2-ø11
146
208
121.5
600
Black White
Unit: mm
Black (+)
White (–)
Rotary switch
Matching
transformer
Speaker
component
10 kΩ
3.3 kΩ
1.7 kΩ
830 Ω
8 Ω
0
Note: The rotary switch is factory-preset to 1.7 kΩ.
2. GENERAL DESCRIPTION AND FEATURES
TOA's CS-64U outdoor speaker features a resin enclosure and stainless steel hardware for all-weather
durability. It is designed to offer the weather resistance and high efficiency of horn speakers combined with
the high sound quality of cone speakers.
5. IMPEDANCE CHANGE
The input impedance is factory-preset to 1.7 kΩ.
To change the impedance, change the rear
panel-mounted rotary switch position to the
desired impedance (wattage) using a standard
screwdriver.
Notes
This speaker is designed to operate on a 70 V
or 100 V line. Do not connect it to the
amplifier's low impedance line.
No sound is output when the switch is set to
the OFF position.
Caution
Never set the switch to "
" position for 100 V
line operation, as doing so may result in damage
to the speaker.
8. SPECIFICATIONS
* Impedance for 70 V line
Note
The design and specifications are subject to
change without notice for improvement.
Speaker Component 12 cm cone speaker
Rated Input 6 W
Impedance (830 Ω)*, 1.7 kΩ, 3.3 kΩ, 10 kΩ
Frequency Response 130 – 13,000 Hz
Sensitivity 96 dB (1 W, 1 m)
Finish Body ABS resin, off-white, paint
Bracket Stainless steel
Net Zinc-coated steel, gray, paint
Dimensions 233 (w) x 224 (h) x 208 (d) mm
Weight 1.5 kg
Line Voltage
Imp.
70 V 100 V
6 W
830 Ω
3 W 6 W 1.7 kΩ
1.5 W 3 W 3.3 kΩ
0.5 W 1 W 10 kΩ
Factory-preset values
OFF
OFF
1W
3W
6W
100V
0.5W
1.5W
3W
6W
70V
10kΩ
3.3kΩ
1.7kΩ
830Ω
IMP.
LINE VOLTAGE
C
eiling surface
Wall surface
Be sure to direct the speaker
down towards the ground.
Otherwise, rain floods the
speaker, causing its failure.
No mounting hardware such
as bolts and nuts is supplied
with the speaker.
Use commercial mounting
hardware appropriate for the
installation environment.
Please install only with either
flexible conduit or flexible
wiring.
7. INSTALLATION
[Mounting on the Wall] [Mounting under the Eaves
or on the Ceiling]
6. CONNECTION
Make the connections using marrets (wire nuts)
inside a UL Listed junction box.
Note
This product shall be installed in accordance with
the National Electrical Code, ANSI/NFPA 70.
UL Listed Junction Box
Marrets (wire nuts)
From Speaker
From Amplifier
(–)
(–)(+)
(+)
533-06-110-5B
URL: http://www.toa.jp/
  • Page 1 1
  • Page 2 2

TOA CS-64U User manual

Type
User manual

TOA CS-64U is a wide-range speaker designed for outdoor use, featuring a durable resin enclosure and stainless steel hardware for all-weather resistance. It offers high efficiency and sound quality, combining the weather resistance of horn speakers with the audio clarity of cone speakers. With a 12 cm cone speaker and a rated input of 6W, the CS-64U delivers a frequency response of 130 Hz to 13,000 Hz and a sensitivity of 96 dB (1 W, 1 m). The speaker's input impedance can be adjusted using a rotary switch, allowing it to operate on 70V or 100V lines with various impedance and wattage options.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI