LG CM2640 Owner's manual

Category
Car media receivers
Type
Owner's manual

LG CM2640

Below you will find brief product information for LG CM2640.

LG CM2640 is a portable micro Hi-Fi system that is equipped with a variety of features to provide you with the best possible audio experience. The device features:

  • Bluetooth support - You can wirelessly stream music from your Bluetooth-enabled devices.
  • USB Direct Recording - You can record music from CDs or the FM radio directly to a USB device.
  • Portable In - You can connect your portable audio devices to the CM2640 and listen to your music through the system's speakers.
  • Android compatibility - You can connect your Android device to the CM2640 and control the playback of your music using the LG Bluetooth Remote app.

LG CM2640

Below you will find brief product information for LG CM2640.

LG CM2640 is a portable micro Hi-Fi system that is equipped with a variety of features to provide you with the best possible audio experience. The device features:

  • Bluetooth support - You can wirelessly stream music from your Bluetooth-enabled devices.
  • USB Direct Recording - You can record music from CDs or the FM radio directly to a USB device.
  • Portable In - You can connect your portable audio devices to the CM2640 and listen to your music through the system's speakers.
  • Android compatibility - You can connect your Android device to the CM2640 and control the playback of your music using the LG Bluetooth Remote app.
www.lg.com
ENGLISH
Please read this manual carefully before operating
your set and retain it for future reference.
CM2640 (CM2640, CMS2640F)
OWNER’S MANUAL
Micro Hi-Fi
System
FRANÇAIS
CM2640-FB.DMARLLK_9469-ENG.indd 1 2014-04-17  3:52:36
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturers
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owners manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
CM2640-FB.DMARLLK_9469-ENG.indd 2 2014-04-17  3:52:36
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
CM2640-FB.DMARLLK_9469-ENG.indd 3 2014-04-17  3:52:36
Table of Contents4
1
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
6 Accessories
7 Playable file Requirement
7 Music file requirement
8 Front Panel
10 Rear Panel
11 Remote Control
2 Connecting
12 Connecting to speakers
12 Attaching the speakers to the unit
12 Antenna Connection
13 Optional Equipment Connection
13 USB Connection
13 PORT. IN Connection
14 PHONES Connection
3 Operating
15 Basic Operations
15 CD/USB Operations
15 Android device Operation
18 Using a Bluetooth wireless technology
18 Listening to music of a Bluetooth
device
20 Using Bluetooth App
20 About “LG Bluetooth Remote” App
20 Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
21 Activate Bluetooth with “LG Bluetooth
Remote” App
22 Radio Operations
22 Listening to the radio
22 Improving poor FM reception
22 Presetting the Radio Stations
22 Deleting all the saved stations
23 Other Operations
23 Programmed Playback
23 Displaying file information
23 Turn off the sound temporarily
23 – DEMO
24 Selecting a folder and an MP3/WMA/
FLAC file
24 Deleting an MP3/WMA/FLAC file
25 Sound adjustment
25 Setting the sound mode
25 Setting the Clock
25 Setting the Clock through “LG
Bluetooth Remote” App
26 Using your player as an alarm clock
26 Sleep Timer Setting
26 – Dimmer
26 Auto Power Down
27 Advanced Operation
27 Recording on USB
27 To select recording bit rate and speed
CM2640-FB.DMARLLK_9469-ENG.indd 4 2014-04-17  3:52:36
Table of Contents 5
1
2
3
4
5
4 Troubleshooting
28 Troubleshooting
5 Appendix
29 Trademarks and Licenses
30 Specifications
31 Maintenance
31 Notes on Discs
31 Handling the Unit
CM2640-FB.DMARLLK_9469-ENG.indd 5 2014-04-17  3:52:36
Getting Started6
Getting Started
1
Unique Features
Bluetooth®
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Connect to Android device
Enjoys music from Android device with simple
connection.
USB Direct Recording
Records music to your USB device.
LG Bluetooth Remote
LG Bluetooth Remote is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to the page 20-21.
Accessories
Please check and identify the supplied accessories.
Remote Control (1) Battery (2)
FM Antenna (1)
CM2640-FB.DMARLLK_9469-ENG.indd 6 2014-04-17  3:52:37
Getting Started 7
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/ WMA/FLAC le compatibility with this unit is
limited as follows :
y
Sampling frequency :
MP3 : within 8 to 48 kHz
WMA : within 8 to 48 kHz
FLAC : within 8 to 96 kHz(USB),
within 8 to 48 kHz(CD)
y
Bit rate : within 8 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y
Maximum les : Under 999
y
File extensions : “.mp3”/ “.wma”/”.ac
y
CD-ROM le format : ISO9660/ JOLIET
y
Support channel(FLAC) : Up to 2 channel
y
Support output bit/sample (FLAC) : 16bit
y
bps(FLAC) : Up to 2.5Mbps
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players. (Mastered/ Live File System :
Disc format system for Windows Vista)
Compatible USB Devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive :
Devices that support USB2.0 or USB1.1.
y
The USB function of this unit does not support
all USB devices.
USB device requirement
y
Devices which require additional program
installation when you have connected it to a
computer, are not supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than
a few minutes to be searched.
y
To prevent data loss, back up all data.
y
If you use a USB extension cable or USB hub, the
USB device is not recognized.
y
Using NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
y
This unit is not supported when the total
number of les is 1 000 or more.
y
External HDD, Card readers, Locked devices, or
hard type USB devices, mobile phone are not
supported.
y
USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
Some USB may not work with this unit.
y
In power on state, you can charge your Android
device via USB port.
CM2640-FB.DMARLLK_9469-ENG.indd 7 2014-04-17  3:52:37
Getting Started8
Getting Started
1
Front Panel
CM2640-FB.DMARLLK_9469-ENG.indd 8 2014-04-17  3:52:37
Getting Started 9
Getting Started
1
a
Disc Slot
Insert a disc in the disc slot with the label side
left.
b
1/!
(POWER)
Switches the unit ON or OFF.
c
Display window
Shows the current status of the unit.
d
FUNC. (FUNCTION)
Changes the input source or function.
e
USB Port
Connects an USB device.
f
EQ
Chooses sound impressions.
SET/DEMO
- Conrms the setting.
- Show DEMO.
ALARM
With the ALARM function you can turn CD, USB
play and TUNER reception on at a desired time.
CLOCK
For setting the clock and checking the time.
g
B
(OPEN/CLOSE)
Ejects or insert the disc from slot loader.
h
C
/
V
(Skip/Search):
Goes to next or previous le/track.
Searches backward or forward (Press and hold)
Tunes in the desired radio station.
d
/
M
(PLAY / PAUSE)
Starts playback.
Pauses playback temporarily, press again to exit
pause mode.
Selects stereo/mono in FM mode.
i
o
/
p
(VOLUME)
Adjusts speaker volume.
Z
(STOP)
Stops playback.
j
USB REC.
Recoding to USB.
k
PORT. IN
Connects to a portable player with audio
outputs.
PHONES
Listens to music with your headphone.(3.5
mm)
Precautions in using the touch buttons
y
Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
y
Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
y
Touch the button that you want to work in
order to operate the function correctly.
y
Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
>
Caution
CM2640-FB.DMARLLK_9469-ENG.indd 9 2014-04-17  3:52:37
Getting Started10
Getting Started
1
Rear Panel
a
ANTENNA (FM)
Connects the FM wired antenna.
b
SPEAKERS terminal
c
Cooling fan
d
Power cord
CM2640-FB.DMARLLK_9469-ENG.indd 10 2014-04-17  3:52:38
Getting Started 11
Getting Started
1
USB REC
DELETE
Battery Installation
Remove the battery cover
on the rear of the Remote
Control, and insert two (size
AAA) batteries with
4
and
5
matched correctly
• • • • • •
a
• • • • •
1
(Power): Switches the unit
ON or OFF.
B
(Open/Close) : Ejects the disc
from slot loader.
PRESETFOLDER
W
/
S
:
-
Searches for a folder of MP3/
WMA/FLAC les. When a CD/
USB containing MP3/WMA/
FLAC les in several folders is
being played, press PRESET.
FOLDER
W
/
S
to select the
folder you want to play.
-
Chooses a preset number for
a radio station.
FUNCTION : Selects the
function and input source.
MUTE
@
: Mutes the sound.
VOL
o
/
p
: Adjusts speaker
volume.
• • • • • •
b
• • • • •
PROGRAM/MEMORY :
- Stores radio stations.
- Creates a playlist you want to
listen to.
SOUND EFFECT : Chooses
sound impressions.
INFO : Sees information about
your music. MP3 les often
come with ID3 tags. The tag
gives the Title, Artist, Album or
Time information.
REPEAT (MENU) : Listens to
your tracks/les repeatedly or
randomly.
C
/
V
(Skip/Search) :
-Skips Fast backward or Forward.
-Searches for a section within a
track/file.
TUNING -/+ :
Selects the radio stations.
Z
ENTER :
- Stops playback or recording.
- Cancels DELETE function.
d
/
M
(Play/Pause) :
- Starts or pauses playback.
SLEEP : Sets the system to turn
off automatically at a specified
time.(Dimmer : The display
window will be darkened by
half.)
USB REC : Starts recording
DELETE : Deletes MP3/WMA/
FLAC files. (USB only)
• • • • • •
c
• • • • •
0 to 9 numerical buttons :
Selects numbered tracks, les, or
preset number.
CLOCK : Sets a clock and checks
a time.
ALARM : Uses your player as an
alarm clock.
• • • • • •
d
• • • • •
SET
Confirms the setting.
Remote Control
CM2640-FB.DMARLLK_9469-ENG.indd 11 2014-04-17  3:52:38
2 Connecting
Connecting12
Connecting
2
Connecting to
speakers
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
>
Caution
Antenna Connection
Connect the supplied FM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
Be sure to fully extend the FM wire antenna.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 12 2014-04-17  3:52:38
Connecting 13
Connecting
2
Optional Equipment
Connection
USB Connection
Connect the USB port of USB Memory to the USB
port on the unit.
Removing the USB Device from the unit
1. Choose a different function/mode or
press
I
on the unit or
Z
ENTER on the
remote control.
2. Remove the USB device from the unit.
,
Note
PORT. IN Connection
The unit can be used to play the music from many
types of external device. (Portable cable is not
supplied as an accessory with this unit.)
1. Connect the portable player to the PORT. IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
.
3. Select the PORTABLE function by pressing
FUNC. on the unit or FUNCTION on the remote
control.
4. Turn on the portable player or external device
and start it playing.
CM2640-FB.DMARLLK_9469-ENG.indd 13 2014-04-17  3:52:39
Connecting14
Connecting
2
PHONES Connection
Connect a pair of stereo headphones ( 3.5 mm
phone plug) to PHONES jack on the unit for private
listening.(Headphones are not supplied as an
accessory with this unit.)
You can’t hear any sound from speakers,
while the headphones plug is inserted in the
PHONES jack.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 14 2014-04-17  3:52:39
3 Operating
Operating 15
Operating
3
Basic Operations
CD/USB Operations
1. Insert a disc by pressing
B
or connect the USB
device to the USB port.
2. Select the CD or USB function by pressing
Press FUNC. on the unit or FUNCTION on the
remote control.
3. Select a track/file you want to play by pressing
C/V
on the unit or the remote control.
To Do this
Stop
Press
Z
on the unit or
Z
ENTER on
the remote control.
Playback Press
d
/
M
.
Pause During playback, Press
d
/
M
.
Skipping to
the next/
previous
track/ le
During playback, press
V
to go
to the next track/le.
Playing less than 2 seconds, press
C
to go to the previous track/
le.
Playing after 3 seconds, press
C
to go to the beginning of the track/
le.
Searching
for a section
within a track/
le
Press and hold
C
/
V
during
playback and release it at the point
you want to listen to.
Searching
for a section
within a folder
Press PRESETFOLDER
W
/
S
on
the remote control.
Playing
repeatedly or
randomly
Press REPEAT(MENU) on the
remote control repeatedly, the
display window will be changed in
the following order,
RPT1 -> RPT DIR (only MP3/WMA/
FLAC) -> RPT ALL -> RANDOM ->
OFF
Music CDs or CD-R/CD-RW in music CD format
can be only played.(12 cm disc)
,
Note
Android device Operation
You can enjoy the sound from your Android device
through USB port. For details about Android device,
refer to the Android device User Guide.
To stream audio from your Android device through
this unit, you need :
y
With Android operation system : Ver 4.1(or later)
and AOA 2.0 (or later)
y
With a micro USB cable
It is possible that certain devices may not
support or be compliant with the AOA2.0 USB
audio standard, resulting in the device freezing
or rebooting after being connected and
detached from the speaker system.
If you experience this problem, please contact
your device manufacturer. Your device may
need to be updated with the latest Jellybean
software and or the correct AOA2.0 USB audio
standard.
You can recommended to remove the case for
your Android device (Ver 4.1 or later) before
you connect your Android device to USB port
using a cable.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to
the Accessory and HID (Human Interface
Device)
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 15 2014-04-17  3:52:39
Operating16
Operating
3
1. Connect Android device to the USB port by
using the Android devices cable.
2. Press FUNC. on the unit or FUNCTION on the
remote control to select USB function.
3. If your unit is connected firmly, ANDROID’ will
appear in the display window.
You can operate your Android device through
an Android devices display by using the remote
control and controlling your Android device.
To Do this
Play Press
d
/
M
.
Pause During playback, press
d
/
M
.
Skip
During playback, press
C
/
V
to go to the next le or to
return to the beginning of the
current le.
During playback, press
C
twice briey to step back to the
previous le.
When you selects USB function, you can see
messages as follows;
Message Cause
USB
Your device is not supported by
AOA 2.0(Only charging)
Number of
les
This unit recognizes your USB.
ANDROID
This unit recognizes your Android
device supported by AOA 2.0 as
known device.
NO USB
Any device is not connected to USB
port.
This unit recognizes your Android
device as an unknown device.
Depending on the type of device, Message will
appear in other way.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 16 2014-04-17  3:52:39
Operating 17
Operating
3
y
If the connection has an error, check these
problems as follows;
-
Your Android device is not connected rmly.
-
This unit recognizes your Android device as
an unknown device.
-
Your Android device is not booted.
-
Check the settings method of USB
connection for Android devices. Some
Android devices in the state of charge you
can not work AOA.
y
In case of no sound from this unit, adjust
the volume of your Android device.
y
The charging time may vary depending on
your Android device.
y
Some Android devices may not be charged.
y
You may not control your Android device
from this unit due to malfunction of Android
device.
y
Depending on your Android devices
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
y
If your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
y
If you use an application, make a call, or
send and receive SMS text message,etc. on
Android device, disconnect it from this unit
and then use it.
y
Disconnect your device from USB port in
case of malfunction, although the device’s
O/S is ver 4.1 (or later).
y
Android devices are disconnected during
playback, even though Android devices
may continue to play.
,
Note
y
USB connection method may appear on the
Android device when connecting this unit.
y
Unplug the power cable or removing
Android device from the unit can cause this
unit may malfunction during operating the
unit after connecting the Android device to
the unit.
y
Operate the Android devices after Android
device is connected to this unit.
y
In the case of some Android devices when
you connect the unit and the unit may
cause malfunction.
y
AOA may not operate smoothly, depending
on the settings on Android devices.
y
This unit might not recognize Android
devices properly when connected or
disconnected to the device. Also, Android
devices may stop or not operate normally.
In this case, reboot the Android device or
disconnect it from the unit and try again.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 17 2014-04-17  3:52:39
Operating18
Operating
3
Using a Bluetooth
wireless technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection is interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to music of a
Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the Press
FUNC. on the unit or FUNCTION on the remote
control. “BT READY” appears in the display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit dispalys as “LG MICRO(XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG MICRO
(F7:08)” on your Bluetooth device.
,
Note
3. Enter the PIN code.
PIN code : 0000
4. When this unit is successfully paired with your
Bluetooth device, “BT PAIRED” appears in the
display window.
Depending on the Bluetooth device type,
some devices have a dierent pairing way.
,
Note
5. Listening to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide. According to your Bluetooth device’s
volume level, the volume level of Bluetooth will
be adjusted.
y
Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
y
When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 18 2014-04-17  3:52:39
Operating 19
Operating
3
y
When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-
There is a obstacle between the unit and
the bluetooth device.
-
There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
You should connect your Bluetooth device
to this unit again when you restart it.
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc..
y
When not connected the Bluetooth,
“BLUETOOTH” and “BT READY appears on
the control panel.
y
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
y
When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
y
Bluetooth connection will be disconnected
when the unit is turned o or the bluetooth
device gets far from the unit.
y
After your device is connected to the unit
via Bluetooth, the function switches to BT
automatically. But while recording, it doesn’t
switch to BT.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 19 2014-04-17  3:52:40
Operating20
Operating
3
Using Bluetooth App
Only Android OS is available to use “LG
Bluetooth Remote app with this unit.
,
Note
About “LG Bluetooth Remote
App
“LG Bluetooth Remote” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.
Install “LG Bluetooth Remote”
App onto Your Bluetooth
Device
There are two ways to install“LG Bluetooth
Remote”App onto Your Bluetooth Device.
Install “LG Bluetooth Remote” App
through QR code
1. Install “LG Bluetooth Remote app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
y
Make sure that your Bluetooth device is
connected to the Internet.
y
Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
,
Note
Install “LG Bluetooth Remote” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
y
Make sure that your Bluetooth device is
connected to the Internet.
y
Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
,
Note
CM2640-FB.DMARLLK_9469-ENG.indd 20 2014-04-17  3:52:40
1 / 1

LG CM2640 Owner's manual

Category
Car media receivers
Type
Owner's manual

LG CM2640

Below you will find brief product information for LG CM2640.

LG CM2640 is a portable micro Hi-Fi system that is equipped with a variety of features to provide you with the best possible audio experience. The device features:

  • Bluetooth support - You can wirelessly stream music from your Bluetooth-enabled devices.
  • USB Direct Recording - You can record music from CDs or the FM radio directly to a USB device.
  • Portable In - You can connect your portable audio devices to the CM2640 and listen to your music through the system's speakers.
  • Android compatibility - You can connect your Android device to the CM2640 and control the playback of your music using the LG Bluetooth Remote app.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document