Barco E2-Tri-Combo Owner's manual

Type
Owner's manual

Barco E2-Tri-Combo is a versatile presentation system that seamlessly combines three separate sources onto a single display. With its ability to accept inputs from a variety of sources, including computers, DVD players, and document cameras, the E2-Tri-Combo is perfect for use in classrooms, conference rooms, and training facilities. The system's intuitive user interface makes it easy to switch between sources and control the layout of the displayed content.

Barco E2-Tri-Combo is a versatile presentation system that seamlessly combines three separate sources onto a single display. With its ability to accept inputs from a variety of sources, including computers, DVD players, and document cameras, the E2-Tri-Combo is perfect for use in classrooms, conference rooms, and training facilities. The system's intuitive user interface makes it easy to switch between sources and control the layout of the displayed content.

Info-T 1441: 1 / 3
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
Event Master Gen 1 and Gen 2 Power Supplies are
Not Interchangeable
General
Phenomenon
Event Master Gen 1 power supplies and Gen 2 power supplies are not interchangeable. Inserting a Gen 1 power
supply in a Gen 2 chassis or inserting a Gen 2 power supply in a Gen 1 chassis damages the power supply and
the system card and voids their warranties.
Cause
Event Master Gen 1 power supplies provide 760 W, Gen 2 power supplies provide 1100 W, and the interconnect
is different.
Solution
Use only Gen 1 power supplies in E2 Gen 1 and S3 chassis, and use only Gen 2 power supplies in E2 Gen 2
chassis. All Gen 1 chassis have a gray front, while the E2 Gen 2 chassis has a black front. This is the easiest
way to identify the Gen 1 chassis versus the Gen 2 chassis.
Scope
This rule affects all E2 and S3 chassis and their power supplies.
Gen 1 and Gen 2 Differences
Front-Panel Differences
Front-Panel Differences
The E2 Gen 1 chassis and the E2 Gen 2 chassis may be distinguished by the color of the front panel. The Gen 1
chassis has a gray front, while the Gen 2 chassis has a black front.
Image 2-1shows the front panel of the Gen 1 and Gen 2 chassis.
A. Must modification, Barco will provide the necessary
components to perform this modification at no charge.
B. Improves the reliability of the product.
C. Improves the general working conditions of the product.
D. For information only.
Serial Number : 1441
Date : 2019-12-02
Product : Event Master Gen 1 and Gen 2 Power Supplies
Priority Code* : D
Barco service bulletin
Info-T 1441: 2 / 3
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
Image 2-1: Gen 1 and Gen 2 chassisfront panels
1 E2 Gen 1 front panel (gray)
2 E2 Gen 2 front panel (black)
Power-Supply Differences
Power-Supply Front-End Differences
The Gen 1 and Gen 2 power supplies may be distinguished by mechanical details on the front end (the end seen
from the rear of the chassis) and on the rear end of the power supply.
Image 2-2 shows the mechanical differences on the front end of the Gen 1 and Gen 2 power supplies.
Image 2-2: Gen 1 and Gen 2 power suppliesfront end
1 E2 Gen 1 power supply
2 Black, flat handle
3 Vertical power-plug socket
(left of the power-supply handle)
4 3 LEDs
(upside-down text)
5 E2 Gen 2 power supply
6 Red, round handle
7 Horizontal power-plug socket
(right of the power supply handle)
8 2 LEDs
Power-Supply Rear-End Differences
Image 2-3 shows the mechanical differences on the rear end of the Gen 1 and Gen 2 power supplies.
Info-T 1441: 3 / 3
Barco Inc, Image Processing | 3078 Prospect Park Drive, Rancho Cordova, CA , 95670, USA
Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com
Image 2-3: Gen 1 and Gen 2 power suppliesrear end
1 E2 Gen 1 power supply
2 E2 Gen 2 power supply
3 Gen 1 interconnect PCB
4 Gen 2 interconnect pins
  • Page 1 1
  • Page 2 2
  • Page 3 3

Barco E2-Tri-Combo Owner's manual

Type
Owner's manual

Barco E2-Tri-Combo is a versatile presentation system that seamlessly combines three separate sources onto a single display. With its ability to accept inputs from a variety of sources, including computers, DVD players, and document cameras, the E2-Tri-Combo is perfect for use in classrooms, conference rooms, and training facilities. The system's intuitive user interface makes it easy to switch between sources and control the layout of the displayed content.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI