![](//vs1.manuzoid.com/store/data-gzf/3de4596495e1118331143672dec5a9bb/2/000814940.htmlex.zip/bg2.jpg)
Step 1:
Before sterilizing, remove
UPC labels and any stickers from the
case. Wash the pacifiers and case
using mild soap and warm water to
ensure both the pacifiers and case
are free of any dirt, food, or oils that
could impair sterilization or cause
damage to the pacifiers or case. Only
use this sterilizing case with Chicco
PHYSIOFORMA pacifiers.
Sterilizer Case
If you have any questions or
comments about this product, or
are missing any of the parts, please
contact us in one of the following
ways:
(877)-424-4226
1826 William Penn Way
Lancaster, PA 17601
www.chiccousa.com
SAVE THESE INSTRUCTIONS
Step 2:
Fill water to the level line on the
side of the case. Place the pacifiers inside
the case and close the lid.
Step 3:
Microwave for 3 minutes.
Step 4:
Sterilizer case, pacifiers and water
temperature can be very hot. Wait at least
5 minutes from the end of the cycle or until
all parts have cooled before touching them.
Step 5:
When all parts have cooled drain
the water from the sterilizer case before
opening and removing the pacifiers.
Sterilizer Case
Level
To ensure optimal hygiene,
always wash and rinse
thoroughly before and
after use. Clean using mild
soap and warm water. Do
NOT use bleach or any
other harsh chemicals. The
pacifier is NOT dishwasher
safe. Dry thoroughly
before storing – If needed,
squeeze out any trapped
water. Store in a dry place.
Cleaning
Level
2
1
5
The sterilizer case allows you to sanitize the pacifier in a
microwave, killing 99.9% of harmful household germs.