2. Miller
  3. KB000000

Miller KB000000, RUNNING GEAR NO. 11A Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Miller KB000000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
June 1991 FORFORM:
Use above FORM number when ordering extra manuals.
OWNER’S MANUAL
OM-650D
No. 11A Running Gear
Description Quantity
Part
No.
Figure 1. Complete Assembly
Item
No.
041 637
1 010 322 NUT, plastic cap .375 slip-on 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 112 719 WHEEL, rubberized 6 in dia x 1.500 wide 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 601 865 NUT, stl hex full fnsh .250-20 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 602 207 WASHER, lock stl split .250 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 008 950 HANDLE, running gear 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 108 940 SCREW, cap stl hexwhd .250-20 x .750 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 +047 398 EXTENSION, handle 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 088 731 BUSHING, snap-in nyl .375 ID x .500mtg hole 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 022 379 AXLE, running gear 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 602 243 WASHER, flat stl std .375 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING: ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Disconnect input power conductors from deenergized supply line BEFORE moving welding power
source.
Install washers (10) and wheels (2)
on axle (9) with offset of the
wheel hub to the inside.
Install snap bushings (8)
from the outside of the wrapper.
SA-082 679-B
1
2
3
4
5
6
7
8
9
10
2
1
Figure 1. Complete Assembly
+The handle extension bracket may be used if required.
BE SURE TO PROVIDE MODEL WHEN ORDERING REPLACEMENT PARTS.
/