Grizzly T10878 Owner's manual

Model T10878 & T10879

G0703 & G0703P Cartridge Filter Replacement

with HEPA Filter Upgrade Kit

Step One:

emove the HEPA filter housing from the blower housing, as shown above, by first loosening and removing

(12) 5/16” x 5/8” hex bolts on the blower housing. After that, loosen and remove (1) 5/16” x 3/4” x and 5/16”

flat washer from the cartridge filter adapter brace at the bottom.

，

Step Two:

ake the HEPA filter housing and remove the HEPA filter cage by loosening and removing (8) 1/4” x 3/4” hex

bolts and 1/4” flat washers. Install the new HEPA filter by installing and tightening the (8) hex bolts and flat

washers to complete the change.

Step Three:

emove the dirty cartridge filter from the filter housing, as shown above, and install the new cartridge filter.

Attach the clean HEPA filter housing to the blower housing by installing and tightening (12) 5/16” x 5/8” hex

bolts on the blower housing. After that, install and tighten (1) 5/16” x 3/4” x and 5/16” flat washer to the

cartridge filter adapter brace at the bottom to complete the change.

UPGRADE COMPLETE!

Download PDF