Grizzly T10878 Owner's manual

Category
Vacuum cleaner supplies
Type
Owner's manual
Model T10878 & T10879
G0703 & G0703P Cartridge Filter Replacement
with HEPA Filter Upgrade Kit
Step One:
R
emove the HEPA filter housing from the blower housing, as shown above, by first loosening and removing
(12) 5/16” x 5/8” hex bolts on the blower housing. After that, loosen and remove (1) 5/16” x 3/4” x and 5/16”
flat washer from the cartridge filter adapter brace at the bottom.
Step Two:
T
ake the HEPA filter housing and remove the HEPA filter cage by loosening and removing (8) 1/4” x 3/4” hex
bolts and 1/4” flat washers. Install the new HEPA filter by installing and tightening the (8) hex bolts and flat
washers to complete the change.
Step Three:
R
emove the dirty cartridge filter from the filter housing, as shown above, and install the new cartridge filter.
Attach the clean HEPA filter housing to the blower housing by installing and tightening (12) 5/16” x 5/8” hex
bolts on the blower housing. After that, install and tighten (1) 5/16” x 3/4” x and 5/16” flat washer to the
cartridge filter adapter brace at the bottom to complete the change.
UPGRADE COMPLETE!
  • Page 1 1
  • Page 2 2

Grizzly T10878 Owner's manual

Category
Vacuum cleaner supplies
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI