-Put the rear axle through one rear wheel,gear box & vehicle body,
-Match and plug the front
cover onto the front
vehicle body,tighten it
with four F4X12 screws.
(P6.7)
P1
P2
P3
P4 P5
P6
put the gear box match the vehicle body and rear wheel very well.
(P1)
-Tighten the out side of this assembled wheel with a M10 washer
and a
M10 nut.(P2)
-Assemble the left rear wheel with one M10 washer inside and one
M10 washer
& one M10 nut outside ,then tighten the M10 nut.
ASSEMBLE FRONT COVER:
ASSEMBLE REAR WHEEL:
P7
P8
-Put the front axle through
one of front wheel,one M10
washer and front-wheel
bracket,then tighten the out
side of this wheel with a M10
washer and a M10 nut.(P8.9)
ASSEMBLE FRONT WHEEL:
P9
M10 Washer
M10 nut
M10 Washer
F4X12 Screw
M10 Washer
Front-wheel bracket
M10 Washer
M10 nut
-4-
M10 Washer
M10 nut
(P3.4.5)