Stanley STPP7502 User manual

Brand: Stanley

Model: STPP7502

Category: Power tools

Type: User manual

Stanley STPP7502 is a versatile power tool designed for precise and efficient planing tasks on wood, wood products, and plastics. Its ergonomic design and robust construction ensure comfortable handling and durability. With a powerful motor, the STPP7502 effortlessly removes material, leaving a smooth and even surface. The adjustable cutting depth allows for precise control over the amount of material removed, making it suitable for a range of applications, from fine finishing to heavy-duty stock removal.

STPP7502

English Page 5

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

A B

C D

E F

ENGLISH

(Original instructions)

I J

ENGLISH

(Original instructions)

Intended use

Your STANLEY planer has been designed for planing wood,

wood products and plastics. The tool is intended for

hand-held use. This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions listed below may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of

electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

inﬂuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

b. Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

c. Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or

energising power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

ENGLISH

(Original instructions)

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do

the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5. Service

a. Have your power tool serviced by a qualiﬁed repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

Additional power tool safety warnings

Warning! Additional safety warnings for planers

• Hold the power tool by insulated gripping surfaces

only, because the cutter may contact its own cord.

Cutting a "live" wire may make exposed metal parts of the

power tool "live" and could give the operator an electric

shock.

• Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by your hand or against the body leaves it

unstable and may lead to loss of control.

• Wait for the cutter to stop before setting the tool

down. An exposed rotating cutter may engage the

surface leading to possible loss of control and serious

injury.

• Keep the cutter sharp. Dull or damaged cutters may

cause the planer to swerve or stall under pressure.

Always use the appropriate type of cutter for the power

tool.

• Do not touch the workpiece or the cutter immediately

after operating the tool. They can become very hot.

• Remove all nails and metal objects from the workpiece

before planning.

• Always hold the tool with both hands and by the handles

provided.

• Immediately disconnect the cable from the mains if it is

damaged or cut.

Warning! Contact with, or inhalation of dusts arising from

planing applications may endanger the health of the operator

and possible bystanders. Wear a dust mask speciﬁcally

designed for protection against dust and fumes and ensure

that persons within or entering the work area are also

protected.

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure

that they do not play with the appliance.

ENGLISH

(Original instructions)

• The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual may present a

risk of personal injury and/or damage to property.

Safety of others

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that they do not

play with the appliance.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

• Injuries caused by touching any rotating/moving parts.

• Injuries caused when changing any parts, blades or

accessories.

• Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing one

tool with another. The declared vibration emission value may

also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level

may increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation of

vibration exposure should consider, the actual conditions of

use and the way the tool is used, including taking account of

all parts of the operating cycle such as the times when the

tool is switched off and when it is running idle in addition to

the trigger time.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

• If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Read

Instructions

Manual

Use Eye

Protection

Use Ear

Protection

V ........ Volts

A ........ Amperes

Hz ....... Hertz

W ........ Watts

min ..... minutes

..... Alternating

Current

..... Direct

Current

....... No-Load

Speed

...... Class II

Construction

.... Earthing

Terminal

.... Safety Alert

Symbol

.../min.. Revolutions

or Recipro-

cation per

minute

Labels on tool

The label on your tool may include the following symbols:

Position of date barcode

The Date Code, which also includes the year of

manufacture, is printed into the housing.

Example:

2014 XX JN

Year of manufacturing

ENGLISH

(Original instructions)

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-off button

3. Shavings discharge outlet

4. Shavings discharge outlet selector

5. Planing depth adjustment knob

6. Planing depth graduation

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Replacing the cutting blades (ﬁg. A)

The cutting blades provided with this tool are reversible.

Replacement cutting blades can be obtained from your local

retailer.

Removing

• Loosen the bolts (7) using the spanner supplied.

• Slide the blade (8) out of the holder.

• Reverse the blade so that the unused side comes in

position. If both sides are worn, the blade must be

replaced.

Fitting

• Slide the blade into the holder until it is against the end

stop.

• Tighten the bolts using the spanner supplied.

Warning! Always replace both cutters.

Adjusting the depth of cut (ﬁg. B)

The depth of cut is indicated by the marking (9). The setting

range can be read from the graduation (6).

• Turn the planing depth adjustment knob (5) to the

required depth of cut.

• Turn the knob to the ‘P' postion whenever the tool is not

in use.

Fitting and removing the parallel fence (ﬁg. C)

The parallel fence is used to for optimum control on narrow

workpieces.

• Thread the knob (11) into the hole on the side of the

planer and securely tighten.

• Loosen the parallel fence adjustment knob (10).

• Slide the parallel fence into the desired position.

• Securely tighten the parallel fence adjustment knob.

Note: The parallel fence should be below the planer when

installed correctly.

• To remove the parallel fence proceed in reverse order.

Connecting a vacuum cleaner to the tool (ﬁg. D)

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool. The adaptor can be purchased from

your local STANLEY retailer.

• Slide the adaptor (12) over the shavings discharge outlet

(3).

• Connect the vacuum cleaner hose (13) to the adaptor.

Fitting the shavings collection bag (ﬁg. E)

The shavings collection bag is particularly useful when

working in conﬁned spaces.

• Slide the connecting plate (14) of the bag over either

side of the shavings discharge outlet (3).

• To prevent chips from coming out opposite side of

shavings discharge outlet, move the shavings discharge

outlet selector (4) to the opposite side from the bag.

ENGLISH

(Original instructions)

Emptying the shavings collection bag

The shavings collection bag should be emptied regularly

while using it to prevent blocking.

• Unzip the bag and empty it before continuing.

Use

Warning! Let the tool work at its own pace. Do not overload.

• Adjust the depth of cut.

• If necessary, ﬁt and adjust the parallel fence.

Switching on and off

Switching on

• Keep the lock-off button (2) depressed and press the

on/off switch (1).

• Release the lock-off button.

Switching off

• Release the on/off switch.

Planing

• Hold the tool with the nose piece of the shoe resting on

top of the workpiece surface.

• Switch the tool on.

• Move the tool steadily forward to perform the cutting

stroke.

• Switch the tool off after the stroke has been completed.

Rebating (ﬁg. F)

• Fit and adjust the parallel fence.

• Proceed as for planing.

Chamfering edges (ﬁg. G)

The V-groove in the nose piece of the shoe enables you to

chamfer edges at 45°, 30° and 15° angles.

• Hold the tool at an angle with the desired groove (20)

around the edge of the workpiece and perform the

cutting stroke.

Parking rest (ﬁg. H)

Your planer is equipped with a parking rest (21) that

automatically lowers into place when the tool is lifted from

the work surface. When planing, the parking foot raises as

the tool is pushed forward. When the parking foot is lowered,

the planer can set on the work surface without the blade

touching.

Hints for optimum use

• Move the tool along the grain of the wood.

• If the grain is cross or curly, or if the workpiece material

is a hard type of wood, adjust the depth of cut to take

only a very thin shaving at each pass and take several

passes to achieve the desired result.

• To keep the tool in a straight line, press down the front of

the tool at the start, and press down the back of the tool

at the end of the cutting stroke.

Accessories

The performance of your tool depends on the accessory

used. STANLEY and Piranha accessories are engineered to

high quality standards and designed to enhance the

performance of your tool. By using these accessories you

will get the very best from your tool.

The following types of cutting blades can be obtained from

your local retailer:

- Tungsten carbide tipped reversible cutting

blades (part no. X35007, supplied per pair)

- High-speed steel reversible cutting blades

(part no. X24192-XJ11, supplied per pair)

ENGLISH

(Original instructions)

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper tool care and

regular cleaning.

Warning! Before performing any maintenance, switch off

and unplug the tool.

• Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

• Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Replacing the drive belt (ﬁg. I)

• Loosen the screws (15) and remove the cover (16).

• Remove the old drive belt.

• Place the new belt (17) over the pulleys. Place the belt

over the large pulley (18) ﬁrst, then over the small pulley

(19), whilst manually rotating the belt steadily.

• Put the cover back in place and tighten the screws.

Motor brush inspection and replacement

(ﬁg. J)

Brushes should be regularly inspected for wear.

• Remove brush cap (22). The brushes should slide freely

in brush box. If brushes are worn down to .3" (8mm) they

should be replaced.

To reinstall, push new brush back into brush box. If replacing

existing brush, maintain same orientation as when removed.

Replace the brush cap (do not overtighten).

Mains Plug Replacement

If a new mains plug needs to be ﬁtted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal of the new

plug.

• Connect the blue lead to the neutral terminal.

• If the product is class l (earthed), connect the green /

yellow lead to the earth terminal.

Warning! If your product is class ll double insulated (only 2

wires in the cord set), no connection is to be made to the

earth terminal.

Follow the ﬁtting instructions supplied with good quality

plugs.

Any replacement fuse must be of the same rating as the

original fuse supplied with the product.

Speciﬁcation STPP7502

Input voltage Vac 220-240

Power input W 750

No-load speed min-1 16,500

Planing width mm 82

Planing depth mm 2.0

Rebating depth mm 12

Weight kg 2.9

Technical Data

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you ﬁnd one day that your Stanley product needs

replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for raw

materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Stanley provides a facility for the collection and recycling of

Stanley products once they have reached the end of their

working life. To take advantage of this service please return

your product to any authorised repair agent who will collect

them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Stanley ofﬁce at the address

indicated in this manual. Alternatively, a list of authorised

Stanley repair agents and full details of our after-sales

service and contacts are available on the Internet at:

www.2helpU.com

ENGLISH

(Original instructions)

One years full warranty

If your STANLEY product becomes defective due to faulty

materials or workmanship within 12 months from the date of

purchase, STANLEY guarantees to replace all defective

parts free of charge or – at our discretion – replace the unit

free of charge provided that:

• The product has not been misused and has been used in

accordance with the instruction manual.

• The product has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorised

persons;

• Proof of purchase is produced.

• The STANLEY product is returned complete with all

original components

If you wish to make a claim, contact your seller or check the

location of your nearest authorised STANLEY repair agent in

the STANLEY catalogue or contact your local STANLEY

ofﬁce at the address indicated in this manual. A list of

authorised STANLEY repair agents and full details of our

after sales service is available on the internet

at:www.stanleytools.com

01/2015

ASSAM: Arun Machine And Tools, A.T.Road, Near Rupshree Cinema, Tokobari, Guwahati, Assam, Pin: 781001, Mob: 9435118754, Tel: 2591868. Bagaria Tools And Hardware, Near

Hotel Vishwaratna, At Road, Guwahati, Assam, Pin: 781001, Mob: 9435011008/9864077172, Tel: 2511173. Vinayak Tools And Machinery, A-1, Mangal Ram Tower, Opposite Police

Reserve, A.T.Road, Guwahati, Assam, Pin: 781001, Mob: 9435049234. Assam Machine Tools, Gar-ali, Jorhat, Guwahati, Assam, Pin: 785001, Mob: 9435050699, Tel: 2321607. Shyam

Machinery And Tools, A.C. Plaza, N.B.Road (Near Ananta Cinema), Tezpur, Assam, Pin: 784001, Mob: 9435081917, Tel: 03712-230142. BIHAR: Jai Ambey Traders, Ramna Road, Near

Rama Bhavan, P.S.-civil Lain, P.O.- Gaya, Bihar Pin: 823001, Mob: 9431224989. CHATTISGARH: Agrawal Motors, Opp Punjab National Bank, Transport Nagar, Korba, Pin: 495677,

Mob: 0'7759245553, Tel: 9893222761. V. M. Enterprises, Millennium Plaza, First Floor-31, Banstal G E Road, Raipur, Pin: 492001, Mob: 9826136099, Tel: 0771-4280808. JHARKHAND:

Sigma Enterprises, Saraidhela Main Road, Near Ajay Talkies, Dhanbad, Bihar, Pin: 828127, Mob: 9431187803, Tel: 206253. Industrial Tools & Equipments, S' Type Chawk, Main Road,

Adityapur, Jamshedpur, West Bengal, Pin: 831013, Mob: 9431348948, Tel: 0657-2383282. Mangilall Rungta, P.O.Jugsalai, Jamshedpur, Jharkhand, Jamshedpur, Pin: 831006, Mob:

9334804626, Tel: 0657-423738. Urica Enterprises, Ram Roop Tulsi Bhawan, 2nd Floor,diaganal Road, Bistupur,jamshedpur, Pin: 831001, Mob: 8292309050, Tel: 0657-2429043.

Industrial Tools Agency, Dr. Fataullah Road, Ranchi, Jharkhand, Pin: 834001, Mob: 9334706264, Tel: 0651-2206712. Ranchi Metal Supply Co., S.N.Ganguly Road, Ranchi, Jharkhand,

Pin: 834001, Mob: 9431174908, Tel: 0651-200066. ORISSA: Utkal Power Tools &sales, Shop No 121,anand Plaza, Lakshmi Sagar Square, Bhubaneshwar, Pin: 751006, Mob:

9437033867, Tel: 0674-2571079. M.R.Hydro Electric Co(Asc), Nua Patna, Buxi Bazar, cuttack, Cuttack, Pin: 754001, Mob: 9337887000. Subham Enterprises, No. 41, Taringini Market,

Rourkela, Orissa, Pin: 769004, Mob: 9437041443, Tel: 0661-440 1443. WEST BENGAL: City Hardware, Nachan Road, Benachity, Durgapur, West Bengal, Pin: 713213, Mob:

9832150581, Tel: 0343-2583831.Cutwell Tools, Below Wbseb Ofﬁce, Howrah Amta Road, Dasnagar, Howrah, West Bengal, Pin: 711105, Mob: 9830057455; 9330034464, Tel: 6530670.

Bardia Trading Co. No. 17 , Princep Street, Kolkata, West Bengal, Pin: 700072, Mob: 9831013176; 9831022454, Tel: 2373065. Machinery & Tools ( India ) 24, netaji Subhas Road,

Kolkata, West Bengal, Pin: 700001, Mob: 9830052968, Tel: 033-2221-3840, S.M.B Corporation, No. 218, Old China Bazar Street, Kolkata, Pin: 700001, Mob: 9903331752, Tel:

22422406/0666. Subol Dutt & Sons Pvt. Ltd., No. 13, Brabourne Road, Kolkata, West Bengal, Pin: 700001, Mob: 9831189629. Delhi/ncr, Sharma Trade Links, 155, Shyam Colony, Near

Panchayat Bhawan, Ballabgarh, Mob: 8447733807, Tel: 0129-4068299. DELHI/NCR: Haryana Agencies, Near Allahabad Bank, Nh-8, Delhi-jaipur Highway, Banipur Chowk,

Bawal(Rewari)haryana, Mob: 9783011902, Tel: 01493-226319. Jmr Techserv India, M-7 1st Floor Guru Ram Dass Bhawan Community Centre, Ranjit Nagar, New Delhi, Pin: 110008,

Mob: 9990119290, Tel: 011-45669290. Jyoti Sales Co, 3523/49a,balaji Market,gill Hakim Baqa, Hauz Qazi Delhi, Pin: 110006, Mob: 9810330626, Tel: M/s Classic Pneumatics, Plot No :

01 Bata Flyover Nit Faridabad, Opposite Bata Showroom, Faridabad Pin: 121001, Mob: 9811140218. Mahalakshmi Trading Corporation, Plot No 40/66b, Industrial Area, ( Near Raj Gas

Agency), Near Hardware Chowk, Faridabad, Pin: 121001, Mob: 9811547845. M/s Shri Ganpati Traders, Plot No:377/24, model Town (4marla) Near Gurudwara, Gurgaon-122001,

Gurgaon, Pin: 122001, Mob: 9871502888, Tel: 0124 2320088. Shiva Machinery Tools, C-100, Sactor-9, Noida. (Up) Noida, Pin: 201301, Mob: 9811162293, Tel: 5514862. HIMACHAL

PRADESH: Chandan Industries, B.O. Opp. 4 Season Hotel, Pinjore Road, Near Bus Stand, Baddi, Himachal Pradesh, Pin: 177701, Mob: 9418021785 And 9418001785, Tel:

94180-01785. JAMMU AND KASHMIR: Bhagwati Sales Corporation, Main Road, Last Morth, Gandhi Nagar, Jammu, Pin: 180001, Mob: 9419182433, Tel: 0191-2452718. PUNJAB:

Karan Enterprises, 101,anand Avenue, Old Jail, Road, Raqttan Singh Chowk, Amritsar, Pin: 147001, Mob: 9815882957. Jai Hind Trading Corporation, Old Bus Stand, Gt Road, Bhatinda.

Bhatinda, Bhatinda, Pin: 151001, Mob: 9879221000. D.P.Jagan & Sons, Sco 46-47, Sec.no-28-c, Chandigarh, Haryana, Pin: 160002, Mob: 9876177441. Fairdeal Agencies, Nehru

Garden Road, Near Ajit Press, Jalandhar, Pin: 144001, Mob: 9814665249. Shashi Industrial Enterprises, E.K. 117, Chowk Bhagat Singh, Near Obc, Jalandhar, Pin: 144001, Mob:

9876456782, Tel: 0181 5003030. Punjab, Arneja Machinery Store, Gill Road Ludhiana, Punjab, Pin: 141003, Mob: 9876300375, Tel: 0161-2537923. Guru Nanak Oxygen Gas Depot

A-9, New Market, Opp. Railway Station, Ludhiana, Pin: 141008. Krishna Metals, Ambala By-pass Road, Near Samrala Chowk, Opp: Duggal Roadline, Ludhiana, Pin: 141003, Tel:

0161-2226258. Anand Tool Zone, D-137, Industrial Area, Phase - Vii, Mohali, Pin: 160055, Mob: 9814116449, Tel: 0'1722651274. Vikas Weld Plot No-257, industrial Area, Phase- I ,

Panchkula, Haryana, Pin: 134113, Mob: 9216800168 And 9216800167, Tel: 0172-2576437. Mohindra Bros. Oil Co., Dana Mandi, Phagwara, Pin: 144401, Mob: 9814533780, Tel: 01824

269082. Thukral Machinery Store, G.T. Road, Rajpura, Rajpura, Punjab, Pin: 140401, Mob: 9872049418, Tel: 9814210733. RAJASTHAN: S. S. Auto Agencies 4, Khailand Market,

Ajmer, Pin: 305001, Mob: 9828053750, Tel: 1452424120. Haryana Iron Traders, Ram Ganj, Alwar, Pin: 301001, Mob: 9829215175. Atul Enterprises, Near Sikar Hotel, Hans Marg,

S.C.Road, Jaipur, Rajasthan, Pin: 302001, Mob: 9829013905, Tel: 0141-2360327. Bhati Hardware House, Opp-hanwant School, Pal Road, Jodhpur (Raj), Jodhpur-342003, Pin: 342003,

Mob: 9414722451 / 9414127770, Tel: 0291-2770506 / 0291-2770337. Sejal Power Tools, 1st Pal Puliya Near Govt School, Main Pal Road Village Pal, Jodhpur, Pin: 342001, Mob:

9799233654, Tel: 0823-3994001. Usha Trading Company, Inside Sojati Gate, Jodhpur, Tel: 2642023. Power Tools& Services, 109 Paliwal Compound, Kota Rajasthan, Pin: 324007, Tel:

0744-2360829. Jagdamba Enterprises, Near Thandi Pau Ki Thadi, Agra Road, Sikandra Chouraya, Sikandara, Pin: 303303, Mob: 9414095522. Brij Machine Tools, Odaka Complex,

Station Road, Sikar, Pin: 332001, Mob: 9887537320, Tel: 01572-253826. M.P.Traders 40, new Keshav Nagar, Roopsagar Road, Udaipur, Pin: 313001, Mob: 9414168109. Rajasthan

Tools (Prop.diesels India) 1, Kasturba Market, Town Hall Road, Udaipur, Pin: 313001, Tel: 0294-2419260. UTTARPRADESH: M P Abrasives, Shop # 19 Srilaxmi Plaza, Gandhiroad,

Dehradun, Pin: 248001, Mob: 9837050196. Sharma Electricals, 1577 Vivekananda Nagar, Double Story, Ghaziabad, Pin: 201001, Mob: 8860602092. Clipco Traders Latouche Road,

kanpur, Uttar Pradesh, Pin: 208001, Mob: 9695887766. Magadh Industrial Company, Royal Vatika, Plot No 46, Flat No 5, Ii Floor, Ratanlal Nagar, Kanpur, Uttar Pradesh, Pin: 208022,

Mob: 9415042109, Tel: 0512-2674635. Virat Enterprises, No. 122/230, Sarojni Nagar, Kanpur, Uttar Pradesh, Pin: 208012, Mob: 9839115747, Tel: 217881 / 221264. Yash Engineering

Works, 83 - Naya Gaun East(Barrow Market), Beside Kohli Light & Shine, Latou, Lucknow, Uttar Pradesh, Pin: 226018, Mob: 9415109785, Tel: 200694. Premier Machinery Store, Venus

Cinema Building, Railway Road, Saharanpur, Pin: 247001, Tel: 2641663/3293755, Amit Enterprises, Ck No-52/14, sarswati Katra, Rajada Waja, Varanasi, Pin: 221001, Mob:

9839040838. ANDHRA PRADESH: General Engineering, # 18-246, room No - 2, Pinni Complex Opp Krishna Theatre, Ananthpur, Andhra Pradesh, Pin: 515001, Mob: 9849388650, Tel:

0854-235706. Gayathri Industrial Corporation 10c, Ushodaya Towers, Industrial Road, Shapurnagar, jeedinemtla, Hyderabad, Andra Pradesh, Pin: 500055, Mob: 9866669671, Tel: 040

65964671. Mega Home Improvement Pvt Ltd, #15-4-238/239, a.p.house, gowliguda Chaman, Hyderabad, Pin: 500012, Mob: 24652000, 65885917/18. Tel: 9000355100. Oriental

Engineering Corporation, 5-2-990, Nizam Shahi Road, Hyderabad, Andra Pradesh, Pin: 500095, Mob: 9848029996, Tel: 040 460 0056, 460 5319. S.V.Industrial & Marketing Services,

2-3-64/8, S.No-1 & 2, Sai Poornima, Opp-amberpet New Police Station, Hyderabad, Andra Pradesh, Pin: 500013, Mob: 9391032617, Tel: 040-27424828. Sai Sales Corporation, No.

10-11-175/17-i, Fathenagar Main Road, Hyderabad, Pin: 500018, Tel: 3876877. Srinivasa Enterprises, 5-5-80,2nd Floor, Sri Srinivasa Commercial Complex, Beside Rao's Hotel

Ranigunj, secunde Hyderabad. Pin: 500003, Mob: 9989039943, Tel: 040-66489943. Vrindavan Enterprises, Shop No - 113, meghana Complex, Opp- Andhra Bank, Balanagar,

Hyderabad, Pin: 500037, Mob: 9391062607, Tel: 30906810. Balaji Mini Tools, Plot No. 1-9-1/2, Beside Venkateshwara Temple, Kushaiguda, Hyderabad, Pin: 500062, Mob:

9246203990/91, Tel: 040 2716663, Lakshmi Sivaram Enterprises, #43-1-48, Opp: Idbi Bank, Main Road, Kakinada, Branch:sarpavaram Junction, Beside Police Station, Kakinada,

Andhra Pradesh, Pin: 533001, Tel: 9848317859. Revathi Enterprises, D. No. 43-7-25, Old Post Ofﬁce Str, Jagannadhapuram Bride, Kakinada, Andhra Pradesh, Pin: 533003, Mob:

9848133585, Tel: 0884-2387328. City Engineering Company, Shop No-14,15,16, Sai Durga Towers, Ongole, Andhra Pradesh, Pin: 523001, Mob: 9848144919, Tel: 08592-221090. Srk

Power Tools Corporation, Door No: 7-30-15, Opp:bata Show Room, Near Santhi, Main, Road Rajahmundry, Pin: 533101, Tel: 9966644555. Maharaja Spares,No. 42, Nethaji Road,

Tirupati, Pin: 517501, Mob: 9440079249, Tel: 0877 2253426. Ganesh Trading Co., 12-10-46, Convent Street, P Box No 83, Vijaywada, Andhra Pradesh, Pin: 520001, Mob: 9849082241,

Tel: 0866-425241 / 426401. Gopalakrishna Engineering Co, Door No 12-6-15, Hart Street, Tarapet, Vijayawada, Pin: 520001, Mob: 0866-2425942, Tel: 9848156713, Sri Shirdi Sai

Enterprises, Door No 12-3-32, Peena Mahamod Street, Tarapet, Vijayawada, Pin: 520001, Mob: 0866-2426333, Tel: 9848139633. S B Enterprises, 28-16-14, Suryabagh,

Visakhapatanam, Andhra Pradesh, Pin: 530020, Mob: 9440191723, Tel: 0891-2562208 / 2569917. Sri Ganesh Hardware & Electricals, No. 7-16-73, Old Gajuwaka Jn, Visakhapatanam,

Andhra Pradesh, Pin: 530026, Mob: 9393100146, Tel: 0891 515524. Sri Sai Srinivasa Electricals, Door No.58-1-392, n.s.t.l.family Gat, Butchiraju Palem, vizag, Visakhapa, Butchiraju

Palem, Pin: 530027, Mob: 9885494398. KARNATAKA: Hindustan Tools, No-22, Kiadb Complex, Tvs Cross, Peenya, Bangalore, Karnataka, Pin: 560002, Mob: 91 9341244149, Tel:

51271028. J V Marketing Corporation 1, Ist Floor, Kssidc Special, Plot No 19, Tvs Cross 1st Stage, Peenya Industrial Estate, Bangalore, Pin: 560058, Mob: 9741295446. Kshipra

Engineering&services, Fathima Eligance, 16, cabin No 3 &5 3rd Floor, 2nd Cross S.G Narayana Layout, Bangalore, Karnataka, Pin: 560027, Mob: 9886502505. Mini Sales And Tools

Service, No 12, 1st Floor, r.k.building, 1st Cross, N.R.Road, Bangalore, Karnataka, Pin: 560002, Mob: 91 98450 36264, Tel: 26702375. New Bangalore Power Tools No-637/4,ﬁrst Floor,

Muniyappa Complex, Opp.i.b.p.petrol Bunk, Jalahalli Cross, Bangalore, Karnataka, Pin: 560057, Mob: 9980013389, Tel: 25900650. Patel Trading Corporation, 1st Floor, No. 57/3, Sardar

Patrappa Road, Bangalore, Karnataka, Pin: 560018, Mob: 98452 92883 Tel: 41247774. Vishal Enterprises I Floor, No.5 Mandi Veerappa Lane, S.J.P. Road Cross, Bangalore, Karnataka,

Pin: 560002, Tel: 080-2236187. Vikrant Sales Corporation, Khanapur Road, Udyambag, Belgaum, Karnataka, Pin: 590008, Mob: 9480422522, Tel: 441256. City Tools Center, Ismail

Complex, N H-17 Main Road, Bhatkal, Karnataka, Pin: 581320, Mob: 9448791748. Sagar Electricals, Shop No. 55 Cmc Complex, Bagalkot Cross, Bijapur, Karnataka, Pin: 586101, Mob:

9448440229, Tel: 08352-22637. A B Agencies Razak Building, Koppikar Road, Koppikar Road, Hubli, Karnataka, Pin: 580020, Mob: 990016001, Tel: 0836-2366812. Lakshmi Sales

Corporation, Lakshmi Towers, Main Road,kulai, Manglore, Pin: 574196, Tel: 0824-2407836.

N a m e s & A d d r e s s e s f o r S T A N L E Y S e r v i c e C o n c e s s i o n a r i e s - I N D I A

KERALA: Tool Tech Inc, Door No. 16/931 & 932b, Aradhana Tourist Home, Kallai Road, Calicut, Pin: 673002, Mob: 9388485464, Tel: 0495 4025071. Powertool Enterprises, 44/2133e,

Freedom Road, Kaloor, Kochi, Kerala, Pin: 682017, Mob: 9895405593, Tel: 0484-4047593. Tool World, 44/2708c Karukappilly, Deshabhimani Road, Kochi,kerala, Pin: 682017, Mob:

9388485378, Tel: 0484-3295546/2409745. Vindia Enterprises, 39/3686, Ravipuram Road, Ernakulam, Cochin, Kerala, Pin: 682016, Mob: 9847219831, Tel: 0484-2356924. Kolar Mill

Stores Pvt. Ltd., 18/1819 Kolar Buildings, Opp Police Station, Up Hill P.O. Mallapuram, Pin: 676505, Mob: 9497 32 00 00, Tel: 0483-2730603. Vulcan Metals, 17/327, Nh 47,

Manappullikkavu, Palakkad. Pin: 678013, Tel: 0491 2506200/2506300. Tool Mec, Xii/689/27, Mars Complex, Poothole Road, Thrissur, Kerala, Pin: 680004, Tel: 0487-2389739. TAMIL

NADU: B. R. Enterprises, No. 147, Broadway, Chennai, Tamil Nadu, Pin: 600108, Mob: 9381071188, Tel: 044 - 42620709 / 42620710. Chennai Power Tools And Electricals, No-648, 1st

Floor, Mth Road, Mannurpet Padi, Chennai, Pin: 600050, Mob: 9841402911, Tel: 044-26251663. K.S.Engineering Equipments, 16, Trunk Road, Poonamallee, Chennai, Pin: 600056,

Mob: 9840986541, Tel: 044 - 26492223. M/s.royal Tools Agencies, Old.no.11, New.no.21, Errabalu Street, Chennai. Pin: 600 001, Mob: 044 – 2538 3048, Tel: 9884176366. Professional

Power Tools Sales &service, No 77/155, Broadway, Chennai, Pin: 600108, Mob: 9841186478, Tel: 044-64555872. Shrimma Power Tools, No. 13, Old Mahabalipuram Road,

Kandanchavadi,Chennai, Tamil Nadu, Pin: 600096, Mob: 9884489709, Tel: 044-64534203. Sri Kathyayeni Enterprises, H-24, Central Avenue, Korattur, Chennai, Tamil Nadu, Pin:

600080, Mob: 9841810789, Tel: 044 - 26873550 /42878495. Aardwolf Engineering Co., No. 180 A/9, Dr. Nanjappa Road, Nsp Complex, Coimbatore, Coimbatore, Tamil Nadu, Pin:

641018, Mob: 9363101650, Tel: 0422 - 2301884 / 2380974. Orient Equipment & Services, P.B. No. 3795, Shop No G-5, V. R. Arcade 295, Dr. Nanjappa Road, Coimbatore, Tamil Nadu,

Pin: 641018, Mob: 9842265222, Tel: 0422 - 2236432 /2238507. Banu Tools, Plot No 7, Amaravathi Towers, Vasavi Street, near Kvb Bank, Nh 7, Bye Pass Road, Hosur, Pin: 635109,

Mob: 9443242102, Tel: 04344 - 242102. Sri Balamurugan Agencies, No.100, t.k, nambi Street, Kanchipuram, Pin: 630501, Mob: 7200726026, Tel: 044-27223444. Sanker Sales

Corporation, No. 270, West Masi Street, Madurai, Tamil Nadu, Pin: 625001, Mob: 9994135241, Tel: 0452 - 2341803. Sri Andal Agencies, 47/10e Devangapuram Extn St, Shevapet,

Salem, Pin: 636002, Mob: 9362755919, Tel: 0427 2223718. Sri Andal Power Tools, No. 5, A Block, Sree Complex, Madurai Road, Trichy, Pin: 620008, Mob: 9944262656, Tel: 0431

4544271. GOA: Mech-tech Enggineering Systems, G-2, Emerald Towers, M.G. Road, Opp State Bank Zonal Ofﬁce, Panji, Goa, Pin: 403001, Mob: 9822122921, Tel: 0832-223601. S.K

.Trading, Shop No 4 Esteeve Apartment, Near Alua Hotel, Merces, Panjim Pin:403005, Mob: 9270143918. S.S.Hitech Engineers, Shop No-2, Laxjot Appts, Near Ktc Bus Stand, Vasco-da

Gama, Goa. Pin: 403802, Mob: 9822904784/9422743330, Tel: 0832-6483256. GUJARAT: Mark Engineering, No. A-13, Jay Raj Complex, opp B.P Petrol Pump, Suni Ni Chawl Chur

Rusta, Odhav, Ahmedabad, Pin: 382415, Tel: 079-29092442. Rushabh Traders, Mira Chember, Opp.syndicate Bank, Kadia Kui, Relief Road, Ahmedabad, Pin: 380001, Mob:

9327070493, Tel: 079 22180265. Shivam Sales & Service, No. 28, Kalpesh Rang Upvan Soci, opp Vastrapur Railway Station, Boot Bhavani Mandir Road, vejalpur, Ahmedabad Pin:

380007, Tel: 079-69501111. Shree Maruti Tools, B/5,new Shivkripa Apartment, Opp, Agiyaras Mata Mandir, Nava, Ahmedabad, Gujarat, Pin: 380013, Mob: 9724313764 & 9426513764,

Tel: 079-7643580/7. Shyam Trading 34, Green Villa, Nr. H.B. Kapadia School, Gurukul Road, Memnagar, Ahmedabad, Gujarath Pin: 380052, Mob: 9825050794, Tel: 079 66522025.

Chintan Electricals, Plot No-1006, gidc Estate, Ankeleshwar,dist-bharuch, Pin: 393002, Mob: 9033533735. Khatri Engineering Company, D.B.Z. - S - 139, Near Pitman's Gas,

Gandhidham, Gujarat, Pin: 370201, Mob: 9898250681, Tel: 02836 - 222921 / 236466. Jay Enterprise, Dhebar Road, Near Ashok Guest House, Rajkot, Pin: 360001, Mob: 9824456452,

Tel: 0281 – 2236235. National Power Tools ( Surat ), Hg41-42, Rushabh Towers, Near Jain Temple, Adajan Patia, Rander Road, Surat, Pin: 395009, Mob: 9898034200. Soham Reparing

Center, 11,rameshwar Society, Beside Rudraksh Residence,kapodra Crossing, Varucha Road Surat, Mob: 9898231287. Vikram Engineers, M.G.Road, No-4, Sanghavi House,

Udyognagar, Udhana, Pin: 394210, Mob: 9427137657, Tel: 0261-2274025. Hariom Enterprise, C1/b 888/1, gidc, Makarpura, Vadodara, Gujarat, Pin: 390001, Mob: 9974027579, Tel:

0265-6543678. B H Traders, No. C-37, Busy Bee Complex, Hanumna Mandir, Bhadakmora, G.I.D..C. Vapi, Pin: 396195, Mob: 9825803227 Tel: 0260-2450808. MADHYA PRADESH:

Bhopal Tools, No. 64, Hamidia Road, Bhopal, Madhya Pradesh, Pin: 462001, Mob: 9826335611, Tel: 736173. Pioneer Marketing Services, 223, Shastri Market, 2nd Floor, Indore,

Madhya Pradesh, Pin: 452007, Mob: 9826053800, Tel: 0731-2538007, Reliable Power Tools, #12 Jawahar Marg, near Patel Bridge, Shalimar Plazza, 1st Floor, shop No.9, Madhya

Pradesh, Pin: 452007, Mob: 9425317352, Tel: 0731-2366352. Vaishno Enterprises, Birla Road, Kolgawan, Satna, Madhya Pradesh, Pin: 485001, Mob: 9425173350, Tel: 251450,

509750. MAHARASHTRA: Datta Enterprises, N-16, Nimbalak Road, Midc Industrial Area, Ahmednagar, Maharashtra, Pin: 414111, Mob: 9225300400 / 9225310081, Tel: 0241-6611130 /

6611131. R B Machinery, Malipura Chowk, Akola, Maharashtra, Pin: 444001, Mob: 9850280021, Tel: 0724-2424354. Machine Tools Centre, Safed Pool Andheri, Kurla Road, Next To

Petrol Pump, Andheri, Mumbai, Pin: 400072, Mob: 9820827827. Spa Technical Services Pvt Ltd, 21-22 Navketan, Mahakali Caves Road Andheri (E), Mumbai, Pin: 400093, Mob:

9867259858. Unique Agencies, Marol Maroshi Road, Marol, Mumbai, Mumbai, Pin: 400059, Mob: 9224295450. Aniket Enterprises, X-324, Near Hdfc Bank, Maharana Pratap Chowk,

Balaji Nagar, Midc, Aurangabad, Pin: 431005, Mob: 9552769194, Tel: 0240-2563312 Padmavati Electricals, Opp. Ramanand Colony, Kranti Chowk, Aurangabad, Pin: 431005, Mob:

9823093783, Tel: 0240 - 2323033. Shaco Sales & Services-aurangabad, X-128,babaji Commercial Complex, Bajaj Nagar Midc Waluj, Aurangabad, Pin: 431005, Mob: 9823466426 /

9028028763, Tel: 0240 2555171. Yash Vinayak Electrical, Shop No 9, Rishabh Apart-1, Near- Ostwal English Academy School, Ostwal Empire, Boisar, Maharashtra, Pin: 401501, Tel:

8407989777. J B Machinery & Tools, Near St Joseph School, Botha Road, Buldhana, Pin: 443001, Mob: 9422881158, Tel: 07262-46159. Sadaguru Power Tools And Electrical, Kohinoor

Centre, Shivaji Chowk, Chakan, Pune, Pin: 410501, Mob: 9822351008, Tel: 02135-645361. Mistry Enterprises Near Prakash Talkies, Parola Road, Dhule, Maharashtra, Pin: 424003,

Mob: 9422787930, Tel: 02562-234429. Vardhman Machine Tools, Shop No 6, Old Maneklal Chawl, L.B.S Marg, Near Telephone Exch, Ghatkopar (W) Mumbai, Pin: 400086, Mob:

9820534052. Sapana Enterprises, Panchganga Factory To Shahpur Road Near Kothari Sizing, P O - Gangan, Ichalkaranji, Maharashtra, Pin: 416116, Mob: 9371678843, Tel:

0230-2495157. S.P. Shah & Sons, Mutta Building, Near Natraj Cinema, Jalana, Maharashtra, Pin: 431203, Mob: 9422215827. Kaurenu Industrial Enterprises, No. 5, Laxmi Tower, Neri

Naka, Jalgaon, Maharashtra, Pin: 425001, Mob: 9422780632, Tel: 0257-2227384. Shri Gajanan Electricals & Machiner, 327-a, Main Gate, Basement, New B.J.Market, Jalgaon,

Maharashtra Pin: 422001, Mob: 9422184432, Tel: 0257-222 4198. Mahavir Electricals, Shop No 8, Inside B.M.C Market, Khar (W), Mumbai, Pin: 400052, Mob: 9867060793. Sushito

Enterprises, B,Under Ground - 1, Prabhakar Plaza, Station Road, Kolhapur, Maharastra, Pin: 416001, Mob: 9423258000, Tel: 0231-667433. Yash Enterprises, 1446 B/c, Empire Tower,

Shop No.lg-1, Dasara Chowk, Laxmipuri, Kolhapur, Maharastra, Pin: 416002, Mob: 9422414211, Tel: 0231-644811. S D Traders, Jamdade Building, Behind Old Power House, Latur,

Maharastra, Pin: 413512, Mob: 9422071082, Tel: 02382-252127. Super Agencies, G' Ward, Shop No - 6, Gurunanak Co-opp Hsg Society, Lonawala, Maharashtra, Pin: 410401, Mob:

9823052516, Tel: 02114-273279. Anil Traders, Shop No 2 Paralkar Wadi, R.C Marg, Chembur Naka, Mumbai, Pin: 400071, Mob: 9322183201. Chaudhary Tools, 33-a, Jayendra Bhuvan,

S.K.Bole Road, Dadar (W), Mumbai, Pin: 400028, Tel: 022-66625190. K.Z.Trading Co., 29/12, abid Manzil, 139, Nagdevi St, Mumbai, Mob: 9029024015. Manoher Electric Stores, 10,

roshni Building, s.v.road, Oshiwara,jogeshwari (West), Mumbai, Maharastra, Pin: 400102, Tel: 022-26784783. Nirav Traders, No. 42, Nagdevi Cross Lane, Mumbai, Maharashtra, Pin:

400003, Mob: 9820127192, Tel: 022-3428672/3422928. Raj Machine Tools, Ii Nd Floor, 71/73, Nagdevi Street, Mumbai, Maharastra, Pin: 400003, Mob: 9323910798, Tel:

022-65213643/2035. S. A. Traders, 76, Nagdevi Cross Lane, Shop No 3. Mumbai, Maharastra, Pin: 400003 Mob: 9870084598, Tel: 022 - 23400988. Shree Sidhivinyak Machine Tools,

Shop No 1, Vishwa Mohini Building, Opp Kamla Nehru Shoping Centre, N.S Road , Mulund, Pin: 400080, Mob: 9594015345. Swastik Machine Tools P Ltd, Sambali Nagar,near Savli

Hotel, Akurli Road,kandivali (E), Mumbai, Pin: 400101, Mob: 9892269974. Rathi Engineering Company, 31 A, Radke Layout, Opp- Saint Xaviers High School, Nagpur, Maharashtra, Pin:

440016, Mob: 9373107555, Tel: 07104-232221. Union Hardware Stores, Central Avenue, Darodkar Chowk, Near Itwari High School, Nagpur, Pin: 440002, Mob: 9971068950 /

9822564150, Tel: 2769620, 2777729. Essel Engineers, No. 6/7, Khetwani D, Near Donde Bridge, Untwadi, Cidco, Nashik, Maharashtra, Pin: 422009, Mob: 9423093243. Meson Traders,

No. 994, Main Road, Nashik, Nashik (M.S.), Pin: 422001, Mob: 09970166552, Tel: 0253 2507862. Vidad Engineering & Electricals, Mahadev Nagar Corner, Near Satpur Bus Stop,

Satpur - Trimbak Road Satpur, Nasik, Pin: 422007, Mob: 9822049760, Tel: 0253 2363567, Fine Electrical Works, Shop No -3 ,janta Market, Plot No 3 & 4 ,Sec-23, Nr Sadguru

Hotel,turbhe ,navi Mumbai, Navi Mumbai, Pin: 400705, Mob: 9322290574. New Bombay (Hardware) Traders Pvt, Plot No 107, Sector-23, Turbhe Service Industries, Near Janta Market,

Vashi, Navi Mumbai, Pin: 400705, Mob: 9820127192, Tel: 022-67973977 / 27835529. Shree Ambica Machine Tools, Shop No 26, Shivaji Chowk, Osmanabad, Maharashtra, Pin: 413501,

Mob: 9881096188, Tel: 0242-227281, Everest Enterprises, Sukhwani Nest, Shop No. 7, Vidhyam Nagar, Pimpri, Pune, Pin: 411018, Tel: 27433522. Faith Machinery Stores, Tip Top Bldg,

Shop No-6&7, 550b, Nanapeth, Near Chacha Halwai Chowk, Laxmi Road, Pune. Pin: 411002, Tel: 020-26137868 / 26137663. K Z Trading Co., Shop No 2, Padamjee Palace, Bhawani

Peth, Pune, Pin: 411042. Max Corporation, No. 95, Ganesh Peth, Laxmi Road, Dulya Maruti Chowk, Pune, Maharashtra, Pin: 411002, Mob: 9371006743, Tel: 020-6341647 / 6344945.

Maharashtra, Ram Electricals, Shagun Chowk, Pimpri, Pune, Pin: 411017, Mob: 9850223068. Solanki Enterprises, No. 288/b, Rasta Peth, Opp M.S.E.B, Near Sai Motors, Pune, Pin:

411011, Mob: 9822002976, Tel: 020 26120268. Superweld Sources Pvt Ltd., Near,Century Enka, Midc Bhosari, Pune, Maharashtra, Pin: 411026, Tel: 020-30681560. Techno Tools, 1 & 2,

P.J. Chambers, Near Ambedkar Statue, Pimpri, Pune, Pin: 411018, Mob: 9822040744, Tel: 020 27421967. Tool Max, "Mauli" 738, Budhwar Peth, Ganesh Road, Nr. Phadke Houd, Pune,

Maharashtra, Pin: 411002, Mob: Tel: 020 32319333. Arc Power Tools & Equipments, Off Chougule Complex, Kupwad Road, Near Railway Gate, Sangli, Maharashtra, Pin: 416415, Mob:

9423871513, Tel: 0233-302185, Shree Sales And Services, Plot No. P-90, Chakan Oil Mill Road, M.I.D.C . Sangli, Maharashtra, Pin: 416436, Mob: 9423871648, Tel: 0233-2645005 /

5616582. M P Engineers, Shop No -7, Jiwhala Housing Society, Near Bombay Restaurant, Old M.I.D.C, Satara, Maharashtra, Pin: 415001, Mob: 9822637283. New Maharashtra

Traders, No. 184 B1/c, Raviwar Peth, Powai Naka, Satara, Maharashtra, Pin: 415002, Mob: 9422033369, Tel: 02162-35605. Madan .j. Dalvi, Gala No -7 .l.v.complex, Ramlal Chowk,

Railway Line, Solapur, Maharastra, Pin: 413001, Mob: 9422068351, Tel: 0217-2727051. Siddhratna Sales & Services, No. 64, Jodbhavi Peth, Solapur, Pin: 413002, Mob: 9423066906,

Tel: 0217 2729911. Suneel Textile Engineering Industri, Plot No. 65, Nagane Nagar, Behind Mahavir Tea Company,kondh-413004, Kondh, Solapur, Pin: 413007, Mob: 9823112275, Tel:

0217-622500. Neha Power Tools, Shop No 4, Bhanu Nagar, Dombivli East, Thane, Mob: 9987209787, Super Sales & Services, Monalisa Bldg., Shop No.5, Hariniwas Circle, Thane,

Thane, Pin: 400602, Mob: 9892375131, Tel:022 - 25386845.