Dometic CFX 75DZW, CFX 95DZW Operating instructions

CFX75DZW, CFX95DZW

Compressor Cooler

Operating manual . . . . . . . . . . . . . . . . . . . . .5

Kompressor-Kühlbox

Bedienungsanleitung . . . . . . . . . . . . . . . . .28

Glacière à compression

Notice d’utilisation . . . . . . . . . . . . . . . . . . .52

Nevera por compresor

Instrucciones de uso . . . . . . . . . . . . . . . . . .76

Geleira com compressor

Manual de instruções . . . . . . . . . . . . . . . . 101

Frigorifero a compressore

Istruzioni per l’uso . . . . . . . . . . . . . . . . . . .125

Compressorkoelbox

Gebruiksaanwijzing. . . . . . . . . . . . . . . . . .149

Kompressor-køleboks

Betjeningsvejledning . . . . . . . . . . . . . . . . 171

Kylbox med kompressor

Bruksanvisning. . . . . . . . . . . . . . . . . . . . . . 192

Kjøleboks med kompressor

Bruksanvisning . . . . . . . . . . . . . . . . . . . . . 214

Kompressori-kylmälaatikko

Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . 236

Компрессорный холодильник

Инструкция по эксплуатации . . . . . . . . . 258

Przenośna lodówka

kompresorowa

Instrukcja obsługi . . . . . . . . . . . . . . . . . . . 281

Chladiaci box s kompresorom

Návod na obsluhu. . . . . . . . . . . . . . . . . . . 305

Kompresorový chladicí box

Návod k obsluze . . . . . . . . . . . . . . . . . . . . 327

Kompresszor hűtőláda

Használati utasítás. . . . . . . . . . . . . . . . . . .349

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

COOLING BOXES

CFX SERIES

CFX75_95DZW--O-16s.book Seite 1 Montag, 14. August 2017 4:29 16

Page is loading ...

CFX75DZW, CFX95DZW

3

EMERGENCY

OVERRIDE

NORMAL

USE

100-240V~AC

12/24V DC

2 3 4 51

4

A

B

5

CFX75_95DZW--O-16s.book Seite 3 Montag, 14. August 2017 4:29 16

Page is loading ...

EN

CFX75DZW, CFX95DZW

5

Please read this operating manual carefully before starting the device.

Keep it in a safe place for future reference. If the device is passed on to

another person, this operating manual must be handed over to the user

along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.2 Operating the cooling device safely . . . . . . . . . . . . . . . . . . . . . . . . . .8

3 Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

5 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

6 Function description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.1 Scope of functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6.2 Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

7Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7.1 Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7.2 Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.3 Connecting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.4 Using the battery monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

7.5 Using the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

7.6 Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

7.7 Switching a compartment off or on . . . . . . . . . . . . . . . . . . . . . . . . . .19

7.8 Enabling Wi-Fi signal for optional app . . . . . . . . . . . . . . . . . . . . . . . 20

7.9 Set brightness of displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

7.10 Using the emergency switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

7.11 USB port for power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7.12 Switching off the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7.13 Defrosting the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7.14 Replacing the AC fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.15 Replacing the DC plug fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.16 Replacing the light PCB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

CFX75_95DZW--O-16s.book Seite 5 Montag, 14. August 2017 4:29 16

EN

Explanation of symbols CFX75DZW, CFX95DZW

6

8 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

9Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

10 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

11 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

1 Explanation of symbols

D

!

A

I

DANGER!

Safety instruction: Failure to observe this instruction will cause fatal or

serious injury.

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

CAUTION!

Safety instruction: Failure to observe this instruction can lead to injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

NOTE

Supplementary information for operating the product.

CFX75_95DZW--O-16s.book Seite 6 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Safety instructions

7

2 Safety instructions

2.1 General safety

!

WARNING!

• Do not operate the cooling device if it is visibly damaged.

• If this cooling device's power cable is damaged, it must be replaced

by the manufacturer, customer service or a similarly qualified person in

order to prevent safety hazards.

• This cooling device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

• This cooling device can be used by children aged 8 years or over, as

well as by persons with diminished physical, sensory or mental capac-

ities or a lack of experience and/or knowledge, providing they are

supervised or have been taught how to use the cooling device safely

and are aware of the resulting risks.

• Cleaning and user maintenance must not be carried out by children

without supervision.

• Children must not play with the cooling device.

• Children must be supervised to ensure that they do not play with the

cooling device.

• Always keep and use the cooling device out of the reach of children

under the age of 8 years.

• Do not store any explosive substances such as spray cans with a

flammable propellant in the cooling device.

!

CAUTION!

• Disconnect the cooling device from the power supply

– before each cleaning and maintenance

– after every use

• Food may only be stored in its original packaging or in suitable

containers.

A

NOTICE!

• Check that the voltage specification on the type plate corresponds to

that of the energy supply.

• Only connect the cooling device as follows:

– With the DC connection cable to a DC power supply in the vehicle

– Or with the AC connection cable to the AC power supply

CFX75_95DZW--O-16s.book Seite 7 Montag, 14. August 2017 4:29 16

EN

Safety instructions CFX75DZW, CFX95DZW

8

• Never pull the plug out of the socket by the cable.

• If the cooling device is connected to the DC outlet: Disconnect the

cooling device and other power consuming devices from the battery

before connecting a quick charging device.

• If the cooling device is connected to the DC outlet: Disconnect the

cooling device or switch it off when you turn off the engine. Otherwise

you may discharge the battery.

• The cooling device is not suitable for transporting caustic materials or

materials containing solvents.

• The insulation of the cooling device contains flammable cyclopentane

and requires special disposal procedures. Deliver the cooling device

at the end of its life-cycle to an appropriate recycling.

2.2 Operating the cooling device safely

!

CAUTION!

• Before starting the cooling device, ensure that the power supply line

and the plug are dry.

A

NOTICE!

• Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for the purpose.

• Do not place the cooling device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

• Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

arises during operation does not build up. Make sure that the cooling

device is sufficiently far away from walls and other objects so that the

air can circulate.

• Ensure that the ventilation openings are not covered.

• Do not fill the inner container with ice or fluid.

• Never immerse the cooling device in water.

• Protect the cooling device and the cable against heat and moisture.

CFX75_95DZW--O-16s.book Seite 8 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Scope of delivery

9

3Scope of delivery

See fig. 1, page 2

4Accessories

Available as accessory (not included in scope of delivery):

Visit the Dometic website (see back page) for information about a Wi-Fi app with

control-, display- and alarm functions. Note that the app may not be available in your

country.

Item Quantity Description

1 1 Cooler

2 1 Connection cable for DC connection

3 1 Connection cable for AC connection

– 1 Operating manual

Designation Ref. no.

Universal fixing kit (belt system) CFX-UFK 9105304041

CFX75_95DZW--O-16s.book Seite 9 Montag, 14. August 2017 4:29 16

EN

Intended use CFX75DZW, CFX95DZW

10

5 Intended use

The cooler is suitable for cooling and freezing foods.

The cooler is designed to be operated from:

• a DC on-board power supply of a vehicle, boat or caravan

• a DC auxiliary battery

• an AC power supply

The cooling device is intended to be used in household and similar applications such

as

• staff kitchen areas in shops, offices and other working environments

• farm houses

• clients in hotels, motels and other residential type environments

• bed and breakfast type environments

• catering and similar non-retail applications

!

CAUTION! Health hazard!

Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

CFX75_95DZW--O-16s.book Seite 10 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Function description

11

6 Function description

The cooler can refrigerate or freeze food products. A fast-acting and efficient cooling

system provides maintenance-free cooling performance with a compressor and con-

trol module.

The cooler has two separate compartments which can be adjusted independently.

The cooler can be used in all combinations:

The cooler is portable.

The cooler can withstand a heel (inclination) of 30°, for example when used on

boats.

I

6.1 Scope of functions

• Power supply with priority circuit for connecting to the AC mains

• Three-level battery monitor to protect the vehicle battery

• Display with temperature gauge in °C and °F

switches off automatically at low battery voltage

• Independent settings, controls and displays for each compartment

• Temperature setting: With two buttons in steps of 1 °C (2 °F)

• Integrated Wi-Fi transmitter hence controllable using an app

• Lid open alarm

• USB port for power supply

• Emergency switch

• Foldable carrying handles

• Three removable wire baskets

Large compartment Small compartment

Refrigerator Freezer

Freezer Refrigerator

Refrigerator Refrigerator

Freezer Freezer

NOTE

The cabinet top surface under the lid gaskets may feel warm. This is

normal as heating is included to prevent condensation.

CFX75_95DZW--O-16s.book Seite 11 Montag, 14. August 2017 4:29 16

EN

Function description CFX75DZW, CFX95DZW

12

6.2 Operating and display elements

Lid latches (fig. 2 1, page 2)

Operating panel (fig. 3, page 2)

Item Description Explanation

1ON

OFF

Switches the cooler on or off when the button is pressed for

between one and two seconds

2

POWER “P”

Status indication

LED lights up green: Compressor is on

LED lights up orange: Compressor is off

LED flashes orange: Display switched off automatically due

to low battery voltage

3 ERROR LED flashes red: Device is switched on but not ready

for operation

4 SET Selects the input mode:

• Temperature setting (large/small compartment)

• Celsius or Fahrenheit display

• Set battery monitor

• Set brightness of display

• Turn Wi-Fi on or off

5 Cooling large Status indication large compartment

LED lights up blue: compartment is cooling

LED off: compartment is not cooling

6 Display large • Shows information for large compartment

• Shows “OFF”, when the compartment is switched off

7 Display small • Shows information for small compartment

• Shows “OFF”, when the compartment is switched off

8 Cooling small Status indication small compartment

LED lights up blue: compartment is cooling

LED off: compartment is not cooling

9 DOWN – Press once to decrease the value

10 UP + Press once to increase the value

CFX75_95DZW--O-16s.book Seite 12 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Operation

13

Connection sockets, Emergency switch (when fitted) and USB port

(fig. 4, page 3)

7Operation

7.1 Before initial use

I

Reversing the lid opening direction

The lid hinges can be moved to the opposite side if you want to open the lids from

the opposite direction. To do this, proceed as follows:

➤ Open the lids and remove them (fig. 5 A, page 3).

➤ Remove the three screws per side hinge (fig. 5 B, page 3) and take off the

hinges.

➤ Remove the plastic covers from the new side hinge positions with a small screw-

driver and re-fit to old hinge positions.

➤ Re-fit the side hinges in the new positions.

➤ Remove the two plastic covers from the centre hinge (fig. 6 A, page 4).

➤ Remove the four screws from the centre hinge (fig. 6 B, page 4) and take off the

hinge.

➤ Remove the plastic cover from the new centre hinge position with a small

screwdriver and re-fit to old hinge position (fig. 6 C, page 4).

Item Description

1 Connection socket AC voltage supply

2 Fuse holder

3 Emergency switch

4 USB port for power supply

5 Connection socket DC voltage supply

NOTE

Before starting your new cooler for the first time, you should clean it

inside and outside with a damp cloth for hygienic reasons (please also

refer to the chapter “Cleaning and maintenance” on page 24).

CFX75_95DZW--O-16s.book Seite 13 Montag, 14. August 2017 4:29 16

EN

Operation CFX75DZW, CFX95DZW

14

➤ Re-fit the centre hinge in the new position.

➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 4).

Selecting the temperature units

Temperature display units can be switched between Celsius and Fahrenheit as

follows:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 3 4, page 2) three times.

➤ Use the “UP +” (fig. 3 10, page 2) or “DOWN –” (fig. 3 9, page 2) buttons to

select Celsius or Fahrenheit.

✓ The selected temperature units then appear in both displays for a few seconds.

The displays flash several times before returning to the current temperature.

7.2 Energy saving tips

• Choose a well ventilated installation location which is protected against direct

sunlight.

• Allow warm food to cool down first before placing it in the cooling device to

keep cool.

• Do not open the cooling device more often than necessary.

• Do not leave the cooling device open for longer than necessary.

• Defrost the cooler once a layer of ice forms.

• Avoid unnecessarily low temperatures.

7.3 Connecting the cooler

Connecting to a battery (vehicle or boat)

The cooler can be operated with 12 V

g or 24 Vg.

A

For safety reasons the cooler is equipped with an electronic system to prevent

polarity reversal. This protects the cooler against short-circuiting when connecting to

a battery.

NOTICE! Danger of damage!

Disconnect the cooler and other consumer units from the battery before

you connect the battery to a quick charging device.

Overvoltage can damage the electronics of the device.

CFX75_95DZW--O-16s.book Seite 14 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Operation

15

Using the fused DC plug

A

➤ Plug the DC connection cable (fig. 1 2, page 2) into the DC voltage socket of

the cooler (fig. 4 5, page 3).

➤ Connect the connection cable to the DC power outlet.

Connecting to AC mains (e.g. in the home or office)

D

The coolers have an integrated multi-voltage power supply with priority circuit for

connecting to an AC voltage source. The priority circuit automatically switches the

cooler to AC operation if the device is connected to an AC power supply, even if the

DC connection cable is still attached.

When switching between the AC power supply and the DC battery supply, the red

LED may light up briefly.

➤ Plug the AC connection cable (fig. 1 3, page 2) into the AC voltage socket of

the cooler (fig. 4 1, page 3).

➤ Connect the connection cable to the AC power outlet.

NOTICE! Danger of damage!

For protection of the device the DC cable supplied includes a fuse inside

the plug. Do not remove the fused DC plug.

Only use the DC cable supplied.

DANGER! Danger of electrocution!

• Never handle plugs and switches with wet hands or if you are

standing on a wet surface.

• If you are operating your cooler on board a boat with an AC mains

connection, you must install a residual current circuit breaker

between the AC mains and the cooler.

Seek advice from a trained technician.

CFX75_95DZW--O-16s.book Seite 15 Montag, 14. August 2017 4:29 16

EN

Operation CFX75DZW, CFX95DZW

16

7.4 Using the battery monitor

The device is equipped with a multi-level battery monitor that protects your vehicle

battery against excessive discharging when the device is connected to the on-board

DC supply.

If the cooler is operated when the vehicle ignition is switched off, the cooler switches

off automatically as soon as the supply voltage falls below a set level. The cooler will

switch back on once the battery has been recharged to the restart voltage level.

A

In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and

“MED” (see the following table).

The battery monitor mode can be selected as follows:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 3 4, page 2) four times.

➤ Use the “UP +” (fig. 3 10, page 2) or “DOWN –” (fig. 3 9, page 2) buttons to

select the battery monitor mode.

✓ Digital display will be as follows:

Lo (LOW), Πd (MED), HI (HIGH)

✓ The selected mode then appears in the display for a few seconds. The display

flashes several times before it returns to the current temperature.

I

NOTICE! Danger of damage!

When switched off by the battery monitor, the battery will no longer be

fully charged. Avoid starting repeatedly or operating current consumers

without longer charging phases. Ensure that the battery is recharged.

Battery monitor mode LOW MED HIGH

Switch-off voltage at 12 V

10.1 V 11.4 V 11.8 V

Restart voltage at 12 V

11.1 V 12.2 V 12.6 V

Switch-off voltage at 24 V

21.5 V 24.1 V 24.6 V

Restart voltage at 24 V

23.0 V 25.3 V 26.2 V

NOTE

When the cooler is supplied by the starter battery, select the battery

monitor mode “HIGH”. If the cooler is connected to a supply battery,

the battery monitor mode “LOW” will suffice.

CFX75_95DZW--O-16s.book Seite 16 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Operation

17

7.5 Using the cooler

A

➤ Place the cooler on a firm foundation.

Make sure that the ventilation slots are not covered and that the heated air can

dissipate.

I

➤ Connect the cooler, see chapter “Connecting the cooler” on page 14.

A

➤ Press the “ON/OFF” button (fig. 3 1, page 2) for between one and two

seconds.

✓ The LED “P” lights up (fig. 3 2, page 2).

✓ The displays (fig. 3 6 and 7, page 2) switch on and show the current

temperatures.

✓ Depending on the compartment set temperatures, the cooler starts cooling

either one or both compartments.

✓ The LEDs (fig. 3 5 and 8, page 2) light up when the respective compartment is

cooling.

I

NOTICE! Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the heat that

generated during operation can dissipate. Ensure that the ventilation

slots are not covered. Make sure that the device is sufficiently far away

from walls and other objects so that the air can circulate.

NOTE

Place the cooler as shown (fig. 1, page 2). If you operate the box in a

different orientation it can be damaged.

NOTICE! Danger from excessively low temperature!

Ensure that the only those objects are placed in the cooler that are

intended to be cooled at the selected temperature.

NOTE

When operating with the battery, the display switches off automatically

if the battery voltage is low. The LED “P” flashes orange.

CFX75_95DZW--O-16s.book Seite 17 Montag, 14. August 2017 4:29 16

EN

Operation CFX75DZW, CFX95DZW

18

Latching the cooler lids

➤ Close the lids.

➤ Press the latches (fig. 2 1, page 2) down, until they latch in place audibly.

I

7.6 Setting the temperature

➤ Press the “SET” button (fig. 3 4, page 2):

– once for the large compartment

– twice for the small compartment

✓ The display of the respective compartment blinks.

➤ Use the “UP +” (fig. 3 10, page 2) and “DOWN –” (fig. 3 9, page 2) buttons

to select the cooling temperature.

You can adjust the cooling temperature so that each compartment works as a

refrigerator compartment or as a freezer compartment.

✓ The cooling temperature appears in the display for a few seconds. The display

flashes several times and then the current temperature is displayed again.

I

NOTE – Alarm “Lid open”

If a lid is left open for three minutes or more and the device is switched

on, the respective interior light will flash until the lid is closed.

NOTE

The temperature of each compartment can be set to –22 °C. The

manufacturer however recommends a cooling temperature of –15 °C to

–18 °C for normal usage and optimum energy consumption.

CFX75_95DZW--O-16s.book Seite 18 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Operation

19

7.7 Switching a compartment off or on

If only one compartment is required, the other compartment can be switched off to

save energy.

Switching off compartment

If the display of the compartment shows a temperature, you can switch off the

compartment as follows:

➤ Press the “SET” button (fig. 3 4, page 2):

– once for the large compartment

– twice for the small compartment

✓ The display of the respective compartment blinks.

➤ Press the “ON/OFF” button (fig. 3 1, page 2).

✓ “OFF” flashes for five seconds on the display of the respective cooling

compartment, then “OFF” is displayed.

Switching on compartment

If the display of the compartment shows “OFF”, you can switch on the compartment

as follows:

➤ Press the “SET” button (fig. 3 4, page 2):

– once for the large compartment

– twice for the small compartment

✓ The display of the respective compartment blinks.

➤ Press the “ON/OFF” button (fig. 3 1, page 2).

✓ The cooling temperature appears in the display for a few seconds. The display

flashes several times and then the current temperature is displayed.

CFX75_95DZW--O-16s.book Seite 19 Montag, 14. August 2017 4:29 16

EN

Operation CFX75DZW, CFX95DZW

20

7.8 Enabling Wi-Fi signal for optional app

The cooler can be controlled via Wi-Fi using an app that you can install on a

compatible device. The app has control, display and alarm functions.

You find further information on the Dometic website for your country (see back

page). Note that the app may not be available in your country.

The Wi-Fi name of the compressor cooler begins with“CFX”. The preset password is

“00000000”. You can change the Wi-Fi name and password individually.

Switching the Wi-Fi signal on or off

➤ Press the “SET” button (fig. 3 4, page 2) six times.

➤ Use the “UP +” (fig. 3 10, page 2) and “DOWN –” (fig. 3 9, page 2) buttons

to switch the Wi-Fi signal on or off.

✓ The desired setting appears in the display for a few seconds. The display flashes

several times and then the current temperature is displayed again.

I

Resetting the Wi-Fi to factory settings

In case you have personalized the Wi-Fi settings of your cooling device using the

Wi-Fi app and forgotten your password, you can reset to the factory settings as

follows:

➤ Press the “SET” button (fig. 3 4, page 2) six times.

➤ Hold the “UP +” (fig. 3 10, page 2) button for at least five seconds.

✓ In both displays “rES” will blink several times before returning to the previous

display.

✓ The Wi-Fi settings have been reset to factory settings.

For additional information visit the Dometic website from which you downloaded

the app.

NOTE

• The default setting for the Wi-Fi transmitter is off. For first time use and

whenever power to the device is interrupted, switch on the Wi-Fi

transmitter to use the app.

• The Wi-Fi transmitter uses a small amount of power. For optimal

energy performance switch the Wi-Fi transmitter off if it is not being

used.

CFX75_95DZW--O-16s.book Seite 20 Montag, 14. August 2017 4:29 16

EN

CFX75DZW, CFX95DZW Operation

21

7.9 Set brightness of displays

The display brightness can be dimmed for low ambient light conditions. To set the

dimming level of the display proceed as follows:

➤ Switch on the cooler.

➤ Press the “SET” button (fig. 3 4, page 2) five times.

➤ Use the “UP +” (fig. 3 7, page 2) or “DOWN –” (fig. 3 6, page 2) buttons to

set the brightness of the displays.

✓ Display will be as follows:

d0 (default), d1 (medium), d2 (dark)

✓ The displays show the set mode for some seconds. The displays flash several

times before they returns to the current brightness.

I

7.10 Using the emergency switch

The emergency switch (fig. 4 3, page 3) is located below the control panel. For

normal operation the switch is in the “NORMAL USE” position.

➤ If an electronic control failure occurs, slide the switch to “EMERGENCY

OVERRIDE” position.

I

NOTE

• The factory setting of brightness of the display is d0 (default).

• If a fault occurs, the brightness automatically is d0 (default). After

troubleshooting the set brightness is reactivated.

NOTE

If the switch is in the “EMERGENCY OVERRIDE” position, the cooler

circuit runs with full cooling capacity and, depending on the running

conditions of each compartment at the time of switching, may either

freeze one or both compartments, and/or stop cooling one of the

compartments.

CFX75_95DZW--O-16s.book Seite 21 Montag, 14. August 2017 4:29 16

EN

Operation CFX75DZW, CFX95DZW

22

7.11 USB port for power supply

The USB port allows you to charge small devices like mobile phones and

mp3-players.

To use your cooling box with any USB devices, simply connect a USB cable (not

included) to your device.

I

7.12 Switching off the cooler

➤ Empty the cooler.

➤ Switch the cooler off.

➤ Pull out the connection cable.

If you do not want to use the cooler for a longer period of time:

➤ Leave the lids slightly open. This prevents odour build-up.

7.13 Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the evaporators.

This reduces the cooling capacity. Defrost the device in good time to avoid this.

A

To defrost the cooler, proceed as follows:

➤ Take out the contents of the cooling device.

➤ If necessary, place them in another cooling device to keep them cool.

➤ Switch off the device.

➤ Leave the lids open.

➤ Wipe off the defrosted water.

NOTE

Ensure that any small device connected to the USB port is compatible

with 5 V/500 mA operation.

NOTICE! Danger of damage!

Never use hard or pointed tools to remove ice or to loosen objects

which have frozen in place.

CFX75_95DZW--O-16s.book Seite 22 Montag, 14. August 2017 4:29 16

Page is loading ...

Dometic CFX 75DZW, CFX 95DZW Operating instructions

Dometic CFX 75DZW, CFX 95DZW Operating instructions

in other languages

Related papers

Other documents