CAUTION:
1. Please do not use this device under the environment of explosives
or other inflammables.
2. Keep children and pets away from the equipment. The equipment is
designed for adult use only.
3. Always use the equipment as indicated. If you find any defective
components whilst assembling or checking the equipment, or if you
hear any unusual noise coming from the equipment during use, stop.
Do not use the equipment until the problem has been rectified.
PRODUCT SPECIFICATIONS:
• Model: ACT-FLMAIR-001
• Weight: 420g
• Current:≤900mA
• Input: DC5.0V/2A
• RatedPower:≤4.5W
OPERATING INSTRUCTIONS:
1. Before turning on the diffuser ensure the water tank is filled to
the max line.
2. Press the power button once to start the diffuser and turn on the
light. For the first setting there will be no time setting.
3. To turn on the time settings double-click the power button to
set the automatic shut off timing to 1-hour. To set the automatic
shut down to three hours double click the atomization button
twice. To set the automatic shutdown to 5 hours, double click
the atomization button six times. To turn off automatic shutdown
click the atomization button two more times.
4. To change the light settings, press the power button once to
change the golden yellow light to a blue light. Press the light
switch one more time to turn the light settings off.
5. Machine will turn off automatically when it runs out of water or
press the power button to turn it off manually.
USAGE RECOMMENDATIONS:
• The maximum water volume of the water tank is 250ml, and the
water injection volume shall not exceed the maximum water level
indication line, otherwise the water leakage will cause damage to
the machine.
• Please use the attached type-c 2A power cord. If you use
a substitute power cord, you must note that the current
specification is 2A, otherwise the atomizer effect will be
affected.
• During operation, the sound inside the water tank is the sound
of atomization, which is normal.
1H 3H 5H
Spray Port
Water Injection
Water Tank
Type-C
Switch
Atomization
Light
Max Line
Shell
• Size: 170×80x108mm
• Tank capacity: 250mL
• Material: ABS/PP/PCBA
• Spray Volume: 15-20mL hr
• Standard sheet: GB4706.1-2005