OSP Furniture KEN79LCH-3 Operating instructions

Brand
OSP Furniture
Model
KEN79LCH-3
Type
Operating instructions
SON79/KEN79
WOOD GUEST CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts and screws are securely tightened.
3. Check that all bolts and screws are tight every three months or as needed.
4. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only. Do not modify Chair in any way.
7. Failure to follow these warnings could result in serious injury.
8. Use mild detergent only for cleaning.
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leatherisnotwarrantedagainstroutinescratchingandscufng,asleatherissubjecttominorblemishesinuse.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it’s
optionOfceStarProductswill:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in
warrantywillbepaidbyOfceStarProducts.
*All warranties are limited to the original purchaser for normal commercial usage dened as a standard forty hour work week by persons weighing 275 lbs. or less.
The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs. or less.
EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Ofce Star Products. The warranty does not cover cosmetic damage
that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product.
When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specic legal rights,
and you may also have other rights which vary from state to state. All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
PartsDepartmentwilldoeverythingpossibletopromptlyremedytheproblem.Contactusviae-mailparts.department@ofcestar.net,byFax1-909-930-5629,or
tollfreepartsnumber1-800-950-7262,MondaythroughFriday8:00a.m.-3:30p.m.PacicTime.
STEP 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
Phillips screwdriver also needed for assembly (not provided)
STEP 1 Insert two Wood Dowels (11) into holes in Backrest (1). Attach Seat Frame (2) to Backrest (1) using two
ShortAllenBolts(7)andtwoLargeWashers(9).DO NOT FULLY TIGHTEN BOLTS.
STEP 2 Attach Right Leg (3) to Backrest (1) using Short Allen Bolt (7) and Small Washer (8). Attach Right Leg (3)
toSeatFrameusingtwoLongAllenBolts(6)andtwoLargeWashers(9).DO NOT FULLY TIGHTEN BOLTS.
STEP 3 Attach Left Leg (4) to Backrest (1) using Short Allen Bolt (7) and Small Washer (8). Attach Left Leg (4)
toSeatFrameusingtwoLongAllenBolts(6)andtwoLargeWashers(9).DO NOT FULLY TIGHTEN BOLTS.
STEP 4AttachSeatCushion(5)toSeatFrameusingeightPhillipsScrews(10).FULLY TIGHTEN ALL BOLTS
AND SCREWS FROM STEPS 1-4. Cover holes in Legs using two Caps (12).
ATTENTION: MAKE SURE ALL BOLTS AND SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
©OfficeStarProducts–December2023
STEP 2
SON79/KEN79
WOOD GUEST CHAIR
ASSEMBLY INSTRUCTIONS
1
2
11
7
9
7
8
3
9
6
1
7
69
8
4
1
PART QTY
1. Backrest ........... 1
2. Seat Frame ......... 1
3. Right Leg ........... 1
4. Left Leg ............ 1
5. Seat Cushion ........ 1
6. Long Allen Bolt ...... 4
7. Short Allen Bolt ...... 4
8. Small Washer ....... 2
9. Large Washer ....... 6
10. Phillips Screw ...... 8
11. Wood Dowel ....... 2
12. Cap .............. 2
13. Allen Key (not shown) . 1
10
10
10
12
12
5
STEP 4STEP 3
  • Page 1 1
  • Page 2 2

OSP Furniture KEN79LCH-3 Operating instructions

Brand
OSP Furniture
Model
KEN79LCH-3
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents