Ergotron 45-273-026 Owner's manual

Brand: Ergotron

Model: 45-273-026

Category: Flat panel wall mounts

Type: Owner's manual

888-45-207-W-02 rev.K • 10/14

1 of 23

StyleView Sit Stand Combo System, with

Small CPU Holder

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

ENGLISH

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

888-45-207-W-02 rev.K • 10/14

2 of 23

1-4 lbs

(0.45-1.8 kg)

6-18 lbs*

(2.7-8.2 kg)

90˚ -10˚

180˚

360˚

20"

(508mm)

(127mm)

25˚

5˚

< 50 lbs (22.7 kg)

1.38" - 3.75"

(35-95 mm)

10mm

11 mm

13 mm

7/16"

11mm 1/4"

> 3"

1/4”

Ø 3/8" (10 mm) Ø 1/2" (12.8 mm)

Ø 7/32" (5.6 mm)

ENGLISH

* The Combo Arm can be modi ed to mount displays up to 25 lbs (11.3

kg), however display lift and tilt motion will not be possible if this option

is chosen. Refer to special instructions on page 14.

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly

installed on the product before attempting adjustments. This product should move smoothly and easily through the

full range of motion and stay where you set it. If movements are too easy or difﬁ cult or if product does not stay in

desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your

product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed

from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps

to ensure safe and optimum operation.

Tools Needed

Concrete Wall Mounting

HOLLOW WALL

Stud Finder

888-45-207-W-02 rev.K • 10/14

3 of 23

AB C D E

M4 x 10mm

M6 x 10mm

M6 x 70mm M4.2 x 25mm

10x 4x

10x

6 mm

3 mm

10x

1/4-20 x 2"

10x

M8 x 16mm

M4 x 8mm

M4 x 6mm

M10 x 18mm

M10 x 16mm

M3.5 x 8mm

M5 x 15mm

8mm

ENGLISH

Components

Optional Weight Capacity Modi cation Fasteners

Flat Head Pan Head

888-45-207-W-02 rev.K • 10/14

4 of 23

6”

(152 mm)

21”

(533 mm)

32.5”

(826mm)

< 31.5”

(800mm)

5’3”-5’9”

(160-175cm)

12.3”

(311mm)

8.1”

(206mm)

8.9”

(226mm)

9.4”

(238mm)

18.8”

(478mm)

28”

(712mm)

16.8”

(425mm)

ENGLISH

Mounting Height for Ergonomic Workstation

This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5’3”-5’9” (160-

175cm).

If user heights are di erent than this, you should change mounting height to accommodate user heights. (Change mounting

height one inch for every one inch di erence in user heights).

Mounting height assumes there is a 6” (152 mm)

distance between the center of your monitor

mounting holes and the top of the screen. If your

distance is smaller, you should increase mounting

height accordingly, if your distance is larger, you

should decrease your mounting height accordingly.

Determine mounting location:

Top view showing range of motion when pulled out from the wall.

Front view with arm pushed back against the wall.

888-45-207-W-02 rev.K • 10/14

5 of 23

10x 10x

10x

Ø 3/8" (10 mm) Ø 1/2"

1/4-20 x 2"

10x

≤ 16"

Studs ≥ 25

gauge steel

≥ 5/8"

Sheetrock

Stud spacing

ENGLISH

Concrete Wall Mounting

HOLLOW WALL

WARNING: Because surfaces vary widely and the ultimate mounting method is out of Ergotron’s control, it is imperative that you consult with

appropriate engineering, architectural or construction professional to ensure that your Ergotron mounting solution is mounted properly to handle applied loads.

888-45-207-W-02 rev.K • 10/14

6 of 23

3-1/8"

(80 mm)

x 10

ENGLISH

Concrete Wall Mounting

WARNING:

Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid

concrete, not mortar or covering material. If you drill into an area of concrete that is

not solid, reposition mounting holes until both anchors can be fully inserted into solid

concrete!

WARNING:

Anchors that are not fully set in solid concrete will not support the applied load

resulting in an unstable, unsafe condition which could lead to personal injury

and/or property damage. Consult a construction professional if you have any

doubt about what this means in regard to your particular situation.

888-45-207-W-02 rev.K • 10/14

7 of 23

10x

123

10x

M6 x 70mm

10mm

10x

ENGLISH

CAUTION: Make sure the wall mount bracket is level,

 ush and snug to the wall surface. DO NOT OVERTIGHT-

EN THE BOLTS.

888-45-207-W-02 rev.K • 10/14

8 of 23

acb

10x

≤ 16"

Studs ≥ 25

gauge steel

≥ 5/8"

Sheetrock

Stud spacing

ENGLISH

HOLLOW WALL

Requires minimum material thickness of 5/8” (16 mm).

888-45-207-W-02 rev.K • 10/14

9 of 23

1234

10x

1/4-20 x 2"

ENGLISH

HOLLOW WALL

CAUTION: Make sure the wall mount bracket is level,

 ush and snug to the wall surface. DO NOT OVERTIGHT-

EN THE BOLTS.

888-45-207-W-02 rev.K • 10/14

10 of 23

c d

M6 x 10mm

6 mm

3 mm

M10 x 18mm

¼"

ENGLISH

NOTE: Fasteners may unwind due to vibration caused by move-

ment of mounting solution over time. Inspect mounting solution

for loose fasteners on a routine basis. If desired, apply a light duty

thread locking adhesive to fasteners before installation to prevent

back-out.

888-45-207-W-02 rev.K • 10/14

11 of 23

6 mm

12x

e f

b c d

M6 x 10mm

3 mm

2x M10 x 16mm

ENGLISH

888-45-207-W-02 rev.K • 10/14

12 of 23

13 mm

M8 x 16mm

2x M5 x 15mm

3 mm

ENGLISH

888-45-207-W-02 rev.K • 10/14

13 of 23

ENGLISH

888-45-207-W-02 rev.K • 10/14

14 of 23

2x M4 x 6mm

M4 x 8mm

20˚

a c

ENGLISH

Optional Weight Capacity Modi cation for Displays 18 - 25 lbs (8.2 - 11.3 kg) Only!

IMPORTANT: with this option display lift and tilt motion are no longer possible. To accomodate extra weight, the display is  xed at one of three heights (spaced

2.5" (64 mm) apart), and display tilt is  xed at 20°. If mounting a display 18 lbs (8.2 kg) or less, skip to next page.

Flat Head

Pan Head

Optional Weight Capacity Modi cation

888-45-207-W-02 rev.K • 10/14

15 of 23

100mm

75mm

4x 4x

M4 x 10mm

0˚ 1x

M3.5 x 8mm

ENGLISH

888-45-207-W-02 rev.K • 10/14

16 of 23

edf

bca

ENGLISH

NOTE: Leave enough slack in cable to allow full range of motion.

Caution:

To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to

follow these instructions may result in equipment damage or personal injury.

888-45-207-W-02 rev.K • 10/14

17 of 23

ENGLISH

NOTE: Make sure cables can slide in and out through

covers and cable channels.

888-45-207-W-02 rev.K • 10/14

18 of 23

ghe

M4.2 x 25mm M4.2 x 25mm

M4.2 x 25mm

4x 2x 2x 2x

Ø 7/32" (xx mm)

.21875

Flush with drywal

12 3

1x 1x

2x 2x 2x

ENGLISH

CAUTION: Make sure there is enough clearance between back of mounted component and cable

channel. Failure to allow clearance space may result in personal injury and equipment damage.

888-45-207-W-02 rev.K • 10/14

19 of 23

14 ab

15 2x

ENGLISH

888-45-207-W-02 rev.K • 10/14

20 of 23

1/4”

8mm

ENGLISH

Increase Lift Strength

If the mounted weight is too heavy or

this product does not stay up when

raised, then you'll need to increase

Lift Strength:

Decrease Lift Strength

If the mounted weight is too light or

this product does not stay down when

lowered, then you'll need to decrease

Lift Strength:

Lift – Up and down

Adjustment Step

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is

properly installed on the product before attempting adjustments. This product should move smoothly and easily

through the full range of motion and stay where you set it. If movements are too easy or difﬁ cult or if product

does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.

Depending on your product and the adjustment, it may take many turns to notice a difference. Any time

equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you

should repeat these adjustment steps to ensure safe and optimum operation.

Page is loading ...

Ergotron 45-273-026 Owner's manual

Brand: Ergotron

Model: 45-273-026

Category: Flat panel wall mounts

Type: Owner's manual

Download PDF

report

Ergotron 45-273-026 Owner's manual

Ergotron 45-273-026 Owner's manual

Related papers

Other documents