2. urban ambiance
  3. UQL1650

urban ambiance UQL1650 Installation guide

  • Hello! I've reviewed the installation instructions for the urban ambiance Light Fixture UQL1650. This document provides a step-by-step guide to assemble and mount the light fixture, including details about required tools and safety precautions. I'm ready to assist you with any questions you have about the installation process.
  • What type of bulb is required for the fixture?
    Is the bulb included with the fixture?
    What is the maximum wattage that the fixture can handle?
1 of 3
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1 BULB REQUIRED
BULB NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs
to cool before replacing.
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts before beginning the installation.
Missing or damaged parts? Contact your original place of purchase.
Table of
Contents
BWire Connector
x 3
Fixture Loop
x 1
C
AMounting Screw
x 3
Fixture Body
x 1
E
Wiring
Fixture hood
& Fixture loop
STEP 4
STEP 2
Fixture Body
STEP 5
Drill Holes
STEP 3
Fixture Hood
x 1
D
Bulb
STEP 1
Installation Instructions: UQL1650
www.urbanambiance.com
2 of 3
STEP 1
STEP 2 1
Remove lock screws
2
Install fixture hood
3
Install fixture loop
www.urbanambiance.com
3 of 3
STEP 3
1
2
1 2 3
4
Step 1
Place Post Fitter to Post
Step 2-3
Mark Mounting Holes Location on Post
Step 4
Drill Holes
1/16” Drill Bit
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 4
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 5
www.urbanambiance.com
/