3
STEP 4
Repeat steps 2 and 3 for the other side of the bed until all legs (A) are separated and
pointing upward and both parts (C) are flat on the floor.
To open the Camping Cot, pull legs (A)
and (B) into an “X” position until canvas
is tight.
STEP 5
Flip the Camping Cot over into the upright position with
the legs resting on the floor. Slide the end bars (D) into the
canvas at the head and foot of the bed. Lock into position
on the main frame using the holes in part (D).
NOTE: Last end bar will be more diicult to attach. Roll it in place
to lock into position.
STEP 6
With both ends slid into the canvas and locked
into positions, the Camping Cot should now feel
sturdy and ready for use.
NOTE: To disassemble, simply reverse the steps!
STEP 7