RCA RPJ116 User manual

  • Hello! I am an AI chatbot trained to assist you with the RCA RPJ116 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTION MANUAL
MULTIMEDIA PROJECTOR
MODEL NO. RPJ116
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
This product is manufactured and sold by Curtis International Ltd.
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are
registered trademarks or trademarks of RCA Trademark
Management and are used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo
referenced herein are neither endorsed nor sponsored by
RCA Trademark Management or its affiliates.
Power adapter
1
26
17-25
14-16
13
Install Dust Cap & Focus Ring
Install USB & Micro SD Card (TF)
External five basic image signal source:
2
TF Card slot
3
Warning
Warning
Warning
Warning
4
Warning
5
Install Dust Cap & Focus Ring
Install Focus Ring
Focus Ring installation
Focus Ring find from packing accessory.
Install the Focus Ring into front lens area ( see the above figure).
Rotate the Focus Ring clockwise to fixing on main unit.
Install Dust Cap
If the unit don’t used , install the Dust Cap on the Focus Ring
until to next time operation.
The double ring focus find from packing accessory.
DUST CAP
FOCUS RING
6
72
"
60
"
50
"
45
"
37
"
2
.
1
5
m
1
.
8
1
m
1
.
5
1
m
1
.
3
5
m
1
.
1
6
m
screen
7
3
8
Warning
6
9
10
(Not Include)
(Not Include)
11
(Not Include)
12
(Not Include)
(Not Include)
this interface can be input with HD player
HDMI output at the connection.
13
Install USB & Micro SD Card (TF)
Install USB device:
1. Press the button to turn off power and the power indicator will light RED.
2. Install the USB device into USB port.
3. After connect, press the button to turn on unit and power indicator will light GREEN
4. Press the button to USB mode, use / to search the file and /
to start play back.
Notes: Remove USB device , press the button to turn off power FIRST.
Install Micro SD Card ( TF ) device:
1. Press the button to turn off power and the power indicator will light RED.
2.
3. After connect, press the button to turn on unit and power indicator will light GREEN
Insert the Micro SD Card into the TF card slot.
This TF card can not support hot plug. make sure this function working properly.
Please insert the TF card before power on.
4. Press the button to TF mode, use / to search the file and /
to start play back.
Notes: Remove Micro SD Card , press the button to turn off power FIRST.
14
power adapter
15
UP
Down
16
17
Click the "MENU" button from the remote or the
button on the projector to show the MENU on the screen.
TF
18
Italian
19
/