Danfoss VLT OneGearDrive Installation guide
- Type
- Installation guide
Danfoss VLT OneGearDrive is a compact, low-voltage AC drive designed for a wide range of industrial applications, such as pumps, fans, compressors, and conveyors. It features a space-saving book-type design and integrated EMC filter, making it easy to install, even in tight spaces. With its advanced control algorithms, the OneGearDrive provides precise speed and torque control, as well as energy savings and reduced maintenance. It also has built-in safety features to protect personnel and equipment.
Danfoss VLT OneGearDrive is a compact, low-voltage AC drive designed for a wide range of industrial applications, such as pumps, fans, compressors, and conveyors. It features a space-saving book-type design and integrated EMC filter, making it easy to install, even in tight spaces. With its advanced control algorithms, the OneGearDrive provides precise speed and torque control, as well as energy savings and reduced maintenance. It also has built-in safety features to protect personnel and equipment.
MAKING MODERN LIVING POSSIBLE
Installation Instructions
VLT
pp
OneGearDrive
Installationsanweisungen • Instrucciones de instalación • Instruções de
instalação • Installatie-instructies • Инструкции по монтажу • Ᏻ広᫂
vlt-drives.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective
companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
*MG75M2AB*
130R0614 MG75M2AB 06/2015
Contents
1 Safety Warnings
3
1.1 Purpose of this Document
3
1.2 Safety Symbols
3
1.3 Intended Use
3
1.4 Qualied Personnel
3
1.5 Safety Precautions
3
1.6 Service and Support
3
2 Sicherheitswarnungen
4
2.1 Zweck dieses Dokuments
4
2.2 Sicherheitssymbole
4
2.3 Bestimmungsgemäße Verwendung
4
2.4 Qualiziertes Personal
4
2.5 Sicherheitsmaßnahmen
4
2.6 Service und Support
5
3 Advertencias de seguridad
6
3.1 Finalidad de este documento
6
3.2 Símbolos de seguridad
6
3.3 Uso previsto
6
3.4 Personal cualicado
6
3.5 Medidas de seguridad
7
3.6 Servicio y soporte técnico
7
4 Avisos de Segurança
8
4.1 Objetivo deste documento
8
4.2 Símbolos de Segurança
8
4.3 Uso pretendido
8
4.4 Pessoal qualicado
8
4.5 Segurança e Precauções
9
4.6 Serviço e suporte
9
5 Veiligheidswaarschuwingen
10
5.1 Doel van dit document
10
5.2 Veiligheidssymbolen
10
5.3 Beoogd gebruik
10
5.4 Gekwaliceerd personeel
10
5.5 Veiligheidsvoorschriften
10
5.6 Service en ondersteuning
11
6 Рекомендации по технике безопасности
12
Contents Installation Instructions
MG75M2AB Danfoss A/S © 06/2015 All rights reserved. 1
6.1 Цель этого документа
12
6.2 Символы безопасности
12
6.3 Назначение устройства
12
6.4 Квалифицированный персонал
12
6.5 Меры предосторожности
13
6.6 Сервис и техническая поддержка
13
7 安全警告
14
7.1 本手册的目的
14
7.2 安全符号
14
7.3 预期用途
14
7.4 具备资质的人员
14
7.5 安全事项
14
7.6 服务和支持
14
8 Installation / Installation / Instalación / Instalação / Installatie / монтаж /
安装
15
8.1 -
15
8.2 -
15
8.3 -
17
8.4 -
17
8.5 -
18
8.5.1 OneGearDrive Standard 18
8.5.2 OneGearDrive Hygienic 19
Contents
VLT
®
OneGearDrive
2 Danfoss A/S © 06/2015 All rights reserved. MG75M2AB
1 Safety Warnings
1.1 Purpose of this Document
The purpose of this document is to describe the instal-
lation of the VLT
®
OneGearDrive.
NOTICE
The information is limited to that which is required for
qualied personnel in normal working situations. Contact
Danfoss for further assistance.
The full operating instructions with more detailed
information are available on the Danfoss website:
vlt-drives.danfoss.com/Products/Detail/Technical-Documents---
contextless/
Compliance with the information in this document is a
prerequisite for:
•
Trouble-free operation.
•
Recognition of product liability claims.
Therefore, read this document before working on or with
the OneGearDrive.
VLT
®
is a registered trademark.
1.2
Safety Symbols
The following symbols are used in this document:
WARNING
Indicates a potentially hazardous situation that could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that could
result in minor or moderate injury. It can also be used to
alert against unsafe practices.
NOTICE
Indicates important information, including situations that
can result in damage to equipment or property.
1.3 Intended Use
The OneGearDrive is intended for commercial installations,
unless otherwise expressly agreed. It complies with the
standards of the series EN 60034/DIN VDE 0530. Use in a
potentially explosive atmosphere is forbidden, if not
expressly intended for this purpose. The OneGearDrive is
designed for ambient temperatures from –20 ˚C to 40 ˚C
and for installation heights up to 1000 m above sea level.
Danfoss assumes no responsibility of any sort for damage
attributable to improper use.
CAUTION
Low voltage machines are components for installation in
machines in the sense of the machinery directive
2006/95/EC.
•
Do not use the machine until conformity of the
nal product with this directive is established
(refer to EN 60204-01).
1.4 Qualied Personnel
All necessary work on electric drive units must only be
performed by adequately qualied personnel (for example,
electrical engineers as specied in draft EN 50 110-1/DIN
VDE 0105), who have the operating instructions provided
and other product documentation available during any
corresponding work, and who are obliged to abide by the
instructions contained therein. Qualied personnel are
persons who are authorised due to training, experience,
and instruction as well as their knowledge of relevant
standards, rules, accident-prevention regulations, and
operating conditions.
1.5
Safety Precautions
WARNING
HIGH VOLTAGE
High voltage, which can lead to death or serious injury,
is present on the connectors.
•
Before working on the power connectors
(disconnecting or connecting the cable to the
OneGearDrive), disconnect the supply to the
frequency converter and wait for the discharge
time to elapse (see the frequency converter
operating instructions).
•
Installation, start-up, maintenance, and
decommissioning must only be performed by
qualied personnel.
1.6 Service and Support
Contact the local service representative for service and
support:
vlt-drives.danfoss.com/Support/Service/
Safety Warnings Installation Instructions
MG75M2AB Danfoss A/S © 06/2015 All rights reserved. 3
1 1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
8 Installation / Installation / Instalación / Instalação / Installatie /
монтаж / 安装
8.1 -
130BD994.11
I
Nmax
5.5 A
n
LT
0..212 rpm f
max
250 Hz
t
amb
40 °C
KTY 84-130
26 kgP3
IP 69K
150 °C (F)
178uxxxxxxxxxxb011
i 14.13
Type
OGDHK214K13140L06XXS31P3A9010H1BXX
Barcode
Made in Germany
M
LT
0..230 Nm
3.1 L Optileb GT220
P1 P2 P3
Illustration 8.1
P1 P2 P3
2.2 l 3.1 l
8.2 -
130BD995.10
1
Illustration 8.2
1 = 178H5006
Installation / Installation... Installation Instructions
MG75M2AB Danfoss A/S © 06/2015 All rights reserved. 15
8 8
130BC426.11
A
A
207.5
45
o
30
A - A
185+0.2
o
5x 30
35
11
6
25.2+0.1
95.5+0.15
140
115
R 35
15
Illustration 8.3
Installation / Installation...
VLT
®
OneGearDrive
16 Danfoss A/S © 06/2015 All rights reserved. MG75M2AB
88
8.3 -
130BD996.10
Illustration 8.4
8.4
-
130BD997.10
Illustration 8.5
Installation / Installation... Installation Instructions
MG75M2AB Danfoss A/S © 06/2015 All rights reserved. 17
8 8
8.5 -
8.5.1 OneGearDrive Standard
130BD422.10
V1 W1
U1
U V W
PEU V W T1 T2
Illustration 8.6
U
1.5 mm
2
(AWG 16) Maximum 2.5 mm
2
(AWG 14)
V
W
PE
T1
0.75 mm
2
(AWG 20) Maximum 1.5 mm
2
(AWG 16)
T2
Installation / Installation...
VLT
®
OneGearDrive
18 Danfoss A/S © 06/2015 All rights reserved. MG75M2AB
88
8.5.2 OneGearDrive Hygienic
130BB868.12
V1 W1
U1
U
V
W
2
3
D
C
A
B
1
4
T1
T2
Illustration 8.7
U 1
1.5 mm
2
(AWG 16) Maximum 2.5 mm
2
(AWG 14)
V 3
W 4
PE 2
T1 A
0.75 mm
2
(AWG 20) Maximum 1.5 mm
2
(AWG 16)
T2 B
Installation / Installation... Installation Instructions
MG75M2AB Danfoss A/S © 06/2015 All rights reserved. 19
8 8
MAKING MODERN LIVING POSSIBLE
Installation Instructions
VLT
pp
OneGearDrive
Installationsanweisungen • Instrucciones de instalación • Instruções de
instalação • Installatie-instructies • Инструкции по монтажу • Ᏻ広᫂
vlt-drives.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective
companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
*MG75M2AB*
130R0614 MG75M2AB 06/2015
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Danfoss VLT OneGearDrive Installation guide
- Type
- Installation guide
Danfoss VLT OneGearDrive is a compact, low-voltage AC drive designed for a wide range of industrial applications, such as pumps, fans, compressors, and conveyors. It features a space-saving book-type design and integrated EMC filter, making it easy to install, even in tight spaces. With its advanced control algorithms, the OneGearDrive provides precise speed and torque control, as well as energy savings and reduced maintenance. It also has built-in safety features to protect personnel and equipment.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Danfoss VLT® Micro Drive FC 51 DIN Rail Kit Installation guide
-
Danfoss VLT OneGearDrive Installation guide
-
-
-
-
-
-
-
-
