Canon PowerShot A100 Owner's manual

Software Starter Guide

PowerShot S330 DIGITAL ELPH / DIGITAL IXUS 330

PowerShot S200 DIGITAL ELPH / DIGITAL IXUS v

2

PowerShot A100

Windows

Macintosh

• This guide explains how to install the software programs and briefly

introduces their functions and operating procedures. For more detailed

explanations, see the Help menu for each program.

• Please read the software license agreement in this guide before using the

software. By using the software, you agree to be bound by the terms of

the agreement.

ENGLISH

To Download Images to a Computer

for

Windows

for

Macintosh

Install the Software p. 20 p. 76

Connect the Camera to a Computer p. 15 p. 15

Start the Software and Download Images p. 36 p. 80

CDI-E042

Disclaimer

• While every effort has been made to ensure that the information contained in this guide is

accurate and complete, no liability can be accepted for any errors or omissions. Canon

reserves the right to change the specifications of the hardware and software described

herein at any time without prior notice.

• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language in any form, by any means, without the prior written

permission of Canon.

• Canon makes no warranties for damages resulting from corrupted or lost data due to a

mistaken operation or malfunction of the camera, the software, the CompactFlash™ cards

(CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.

Trademark Acknowledgments

• Canon and PowerShot are trademarks of Canon Inc.

• ArcSoft, the ArcSoft logo, ArcSoft PhotoImpression and ArcSoft VideoImpression are

trademarks or registered trademarks of ArcSoft, Inc.

• Adobe is a trademark of Adobe Systems Incorporated.

• CompactFlash is a trademark of SanDisk Corporation.

• iBook and iMac are trademarks of Apple Computer, Inc.

• Macintosh, PowerBook, Power Macintosh and QuickTime are trademarks of Apple Computer

Inc., registered in the United States and other countries.

• Microsoft, Windows and Windows logo are either registered trademarks or trademarks of

Microsoft Corporation in the United States and / or other countries.

• Netscape and Netscape Navigator are trademarks or registered trademarks of Netscape

Communications Corporation in the United States and other countries. Netscape

Communicator is a trademark of Netscape Communications Corporation.

• Other names and products not mentioned above may be registered trademarks or trademarks

of their respective companies.

SAFETY PRECAUTIONS

The precautions noted within this guide are intended to instruct you in the safe and

correct use of the products and to prevent injuries or damage to yourself, other

persons and property. Please read and ensure that you understand them before

proceeding to other sections of the guide.

Warnings

This symbol indicates topics that could lead to death or serious

injury if ignored or handled incorrectly.

Warning

• Do not play the supplied CD-ROM(s) in any CD player that does not support data

CD-ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could

damage the speakers. It is also possible to suffer from hearing loss from listening

with headphones to the loud sounds of a CD-ROM played on a music CD player.

i

READ CAREFULLY BEFORE USING

Canon Software License Agreement

IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN THIS

BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.

This is a license agreement (the “Agreement”) between you and Canon Inc. (“Canon”).

IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE

SOFTWARE PROGRAM ON THE CD-ROM (INCLUDING ALL SOUND AND IMAGE DATA) AND THE USER

MANUAL IN THIS BOX (COLLECTIVELY, THE “SOFTWARE”) AND PROMPTLY RETURN THE SOFTWARE

TO YOUR POINT OF PURCHASE FOR A REFUND.

In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions

of this Agreement.

1. LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a single

computer. You may physically transfer the SOFTWARE from one computer to another provided that the

SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a

network, multiple CPU, multiple site arrangement, or any other hardware configuration where the

SOFTWARE is accessible to more than one CPU or to more than one user.

With respect to the sound and image data (“Data”) contained in the Software, which are to be

downloaded to the applicable Canon digital camera product, Canon grants you a personal, non-exclusive

license to use the Data on a single Canon digital camera product only.

YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE,

TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE, ALTER,

MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART, EXCEPT AS

EXPRESSLY PROVIDED IN THIS AGREEMENT.

2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or copy the

SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original

for back-up purposes. Any other copying of the SOFTWARE is a violation of this Agreement. You must

reproduce and include the copyright notice on the back-up copy.

3. SUPPORT AND UPDATES: Neither Canon, nor its subsidiaries, dealers or distributors will be responsible

for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be

made available for the SOFTWARE.

4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and

match the hardware and software components of your computer system. Thus Canon does not

guarantee uninterrupted service or correction of errors or that the functions or performance of the

SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON AN “AS IS” BASIS AND

WITHOUT WARRANTY OR CONDITION OF ANY KIND. The CD-ROM storing the SOFTWARE is warranted

only against defective material under normal use for a period of ninety (90) days after purchase from an

authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM

shall be replacement of the same without charge when returned by you at your expense to your point of

purchase and proven to be defective upon inspection. The Replacement CD-ROM will be warranted for

the remainder of the original ninety (90) day warranty period of the defective CD-ROM. The limited

warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of

the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.

EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S SUBSIDIARIES,

DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR CONDITIONS, EXPRESS OR

IMPLIED, INCLUDING ANY WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.

NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS LIABLE

FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, DIRECT,

CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR

INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE

THEREOF.

ii

NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL

HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A

THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY

INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.

SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF

IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE

ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY

TO YOU.

5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until expiration

of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement

by destroying the SOFTWARE. This Agreement will also terminate without notice to you if you fail to

comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE. In

addition, Canon may enforce its other legal rights.

6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:

The SOFTWARE is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting

of “commercial computer software” and “commercial computer software documentation,” as such

terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R.

227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the SOFTWARE

with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-

ku, Tokyo 146-8501, Japan.

7. EXPORT RESTRICTIONS: You agree to comply with all export laws and restrictions and regulations of

the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of

any such laws and restrictions and regulations, or without all necessary approvals.

8. SEVERABILITY:

In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal

of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that

court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.

9. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in the

United States of America shall be governed and construed in all respects in accordance with the laws and

regulations of the State of New York, without reference to choice of law principles. The terms of this

Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the

province of Ontario.

10. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the

SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the

SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and

trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated

corporations and third party licensors under such laws. You only own the CD-ROM media in which the

Software is stored. Except as expressly provided herein, no license or right, express or implied, is hereby

conveyed or granted by Canon to you for any intellectual property of Canon. Nothing contained in

Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual

material that you save in connection with the Software.

You may not modify, remove or delete any or all copyright notices (i) which are contained in the Software,

including any copy thereof, and (ii) which are on the original CD-ROM and on the medium of a back-up

copy made pursuant to Section 2 above.

11. ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ

THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND

CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE

STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER

HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND

ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER

HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A

DULY AUTHORIZED OFFICER OF CANON.

Read Me First

(Windows / Macintosh)

A Guide to the Manuals ..................................................... 2

What Can Be Accomplished with the Software ................ 6

Canon Digital Camera Solution Disk ..................................... 6

Arcsoft Camera Suite CD-ROM ........................................... 11

Camera and Software Compatibility ................................... 12

System Requirements ...................................................... 13

Windows .......................................................................... 13

Macintosh ......................................................................... 14

Connecting the Camera to a Computer ........................... 15

Selecting a Downloading Method ....................................... 15

Connecting to a USB Port .................................................. 16

Connecting to a CF Card Reader or PC Card Reader ............ 17

2

A Guide to the Manuals

The following manuals are supplied with the software products. Please read the

respective manual according to the guidelines below.

Software Starter Guide (This Guide)

This manual explains how to install the software and provides a

simple description of how you can download images recorded with

the camera onto your computer.

Read this Manual for the Following

• When you wish to install/uninstall the software

• When you wish to install/uninstall the USB Driver

• When you wish to download recorded images to your computer

• When you wish to learn the features of ZoomBrowser EX

(Windows) and ImageBrowser (Macintosh)

ZoomBrowser EX Software User Guide (Windows)

ImageBrowser Software User Guide (Macintosh)

The manuals in PDF format provide a relatively detailed description of

the operating procedures for the ZoomBrowser EX program for

Windows and the ImageBrowser program for Macintosh.

Read this Manual for the Following

• When you wish to organize and search for images

• When you wish to edit or add special effects to images

• When you wish to print images

• When you wish to stitch images together into a panoramic image

• When you wish to edit a camera slide show

• When you wish to send an image as an email attachment

• When you wish to save settings, such as the camera start-up image

and start-up sound, to the camera from a computer

3

Card Photo Printer CP-10

Printer Driver User Guide (Windows/Macintosh)

This manual in PDF format explains how to install the printer driver

for Card Photo Printer CP-10 (sold separately) onto your computer

and connect the printer to the computer for printing.

Read this Manual for the Following

• When you wish to install/uninstall the printer driver (required to

use the CP-10)

• When you wish to install/uninstall the USB driver

• When you wish images saved onto the computer to be printed

with the CP-10

• When you wish to print original photo cards

• When you wish to print on labels (8-label sheets)

Each software program is also supplied with an onscreen Help

menu that explains detailed operating procedures. Please use

the Help menu in conjunction with the other manuals.

4

How to View the Software User Guides for ZoomBrowser EX

and ImageBrowser

• Adobe Acrobat Reader must be installed on your computer to read the

ZoomBrowser EX Software User Guide (Windows) or ImageBrowser

Software User Guide (Macintosh), which are PDF files. If it is not, please

read the explanation for installation instructions at the bottom of next

page.

The ZoomBrowser EX Software User Guide (Windows) and ImageBrowser Software

User Guide (Macintosh) are contained as PDF files on the Canon Digital Camera

Solution Disk, a CD-ROM.

Windows

1. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

The installer panel will display.

2. In the installer panel, click [Using the Software] and [ZoomBrowser EX].

The guide will display.

• If the installer panel does not display automatically, open the [Readme] and [English]

folders on the CD-ROM and double-click the [ZOOMBROWSER EX GUIDE.PDF] file.

Macintosh

1. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

2. Double-click the CD-ROM icon followed by the [Canon Digital Camera Installer]

icon.

The installer panel will display.

3. In the installer panel, click [Using the Software] and [ImageBrowser].

The guide will display.

• You can also display it by opening the [Readme] and [English] folders on the CD-

ROM and double-clicking [IB_guide.pdf].

5

How to View the Card Photo Printer CP-10 Printer Driver

User Guide

• Adobe Acrobat Reader must be installed to view the Printer Driver

User Guide (Windows/Macintosh) for Card Photo Printer CP-10. If it is

not installed on your computer, install it using the procedures at the

bottom of the page.

The Card Photo Printer CP-10 Printer Driver User Guide (Windows/Macintosh) is

contained on the Canon Digital Camera Solution Disk.

Windows

1. Place the Canon Digital Camera Solution Disk in your computer’s CD-ROM drive.

The installer panel will display.

2. In the installer panel, click [Using the Software] and [CP-10 Printer Driver].

The Card Photo Printer CP-10 Printer Driver User Guide (Windows/Macintosh) will

display.

• If the installer panel does not display automatically, open the [Readme] and

[English] folders on the CD-ROM and double-click the [CP-10.pdf] file.

Macintosh

1. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.

2. Double-click the [Canon Digital Camera Installer] icon in the CD-ROM window.

The installer panel will display.

3. In the installer panel, click [Using the Software] and [CP-10 Printer Driver].

The Card Photo Printer CP-10 Printer Driver User Guide (Windows/Macintosh) will

display.

• You can also display it by opening the [Readme] and [English] folders on the CD-

ROM and double-clicking the [CP-10.pdf] file.

How to Install Adobe Acrobat Reader

• Windows

1. Place the Canon Digital Camera Solution Disk in the computer’s CD-ROM drive.

2. Open the [Readme], [English] and [Acrobat] folders.

3. Double-click the [ar405eng.exe] file to start the installer.

Follow the onscreen instructions to install Adobe Acrobat Reader.

• Macintosh

1. Place the Canon Digital Camera Solution Disk in the computer’s CD-ROM drive.

2. Open the [Readme], [English] and [Acrobat] folders.

3. Double-click the [Reader Installer] file to start the installer.

Follow the onscreen instructions to install Adobe Acrobat Reader.

6

What Can Be Accomplished with the Software

This topic introduces the main features of the software programs contained on the

CD-ROMs.

Canon Digital Camera Solution Disk

Some camera models do not support some of the software functions.

Please check the Camera and Software Compatibility chart to confirm the

compatibility of your camera. (p. 12)

• Downloading Camera Images to Your Computer

ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)

You can start either of these programs* and display the camera images automatically

simply by connecting the digital camera to the computer’s USB port. Download the

camera’s still images or movies by selecting the thumbnails (tiny images) shown on

the computer display.

* For Windows systems, the ZoomBrowser EX auto start function is only supported for

Windows 98/Windows 2000/Windows XP. It is not supported for Windows Me.

TWAIN Driver (Windows)

This driver for Windows 98 and Windows 2000 loads camera images into TWAIN-

compliant programs, such as ArcSoft PhotoImpression and ArcSoft VideoImpression.

WIA Driver (Windows)

This driver for Windows Me and Windows XP starts the Scanners and Cameras

Wizard to automatically download camera images to the computer. It also allows you

to copy camera images using standard file copying procedures in Windows Explorer

(but it cannot upload computer files to the camera).

7

Plug-In Module (Macintosh)

This plug-in module loads camera images into plug-in compliant programs on the

computer.

USB Mounter (Macintosh)

This utility allows you to treat the camera like a computer drive or read-only CF card

reader, displaying the CF card contents on the computer and permitting files to be

downloaded as if they were being copied from a card reader.

• Categorizing and Organizing Large Volumes of Images

ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)

These programs display downloaded images in lists and allow you to sort and

organize them by content. They allow you to search and organize images as if they

were spread out on your desktop.

• Searching and Organizing Images Chronologically

ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)

These programs can display images in order according to the creation date. As the

images display in a simulated time tunnel, you can zoom the tunnel forward and

backward in time as if you were moving through time.

• Converting RAW Format Image Files

RAW Image Converter

This program converts RAW format images that have been downloaded to a

computer into standard image formats, such as the TIFF (8 bit / channel or 16 bit/

channel) and JPEG formats.

* ZoomBrowser EX (Windows), ImageBrowser (Macintosh), TWAIN Driver (Windows 98/

Windows 2000 only) and Plug-In Module (Macintosh) can also convert RAW images.

8

• Creating Mail Attachments from Images

ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)

These programs can start your email program* and send images as file attachments

to it. Since the file size and compression rate can be controlled, you can reduce large

image files to sizes small enough for easy transmission.

* The automatic start of email programs is only supported by Windows and the email

programs must be enabled as MAPI clients.

• Programs for Saving New Start-Up Images and Start-Up

Sounds to the Camera

ZoomBrowser EX (Windows)/ImageBrowser (Macintosh)

These programs can add various camera settings such as start-up images, start-up

sounds and shutter sounds - collectively called the My Camera Settings - that have

been saved onto the computer.

9

• Laying Out and Printing Images

PhotoRecord (Windows)/ImageBrowser (Macintosh)

These programs permit you to add backgrounds and borders (Windows only), as well

as titles and comments, and print out the images. You can enjoy preparing prints of

your images appearing as if they were pasted into a photo album. Naturally, you can

also use them to make artistic single-image layouts.

• Programs for Printing Indexes

PhotoRecord (Windows)/ImageBrowser (Macintosh)

These programs can output an index of the computer or camera’s image thumbnails

(tiny versions) to a printer.

• Programs for Printing with Card Photo Printer CP-10

PhotoRecord (Windows)/ImageBrowser (Macintosh)

These programs can output your original photo cards with added text or design, or

labels (8-label sheets) to Card Photo Printer CP-10 (sold separately) when connected

to the computer by interface cable PIF-100 (sold separately).

10

• Merging Panoramic Images

PhotoStitch

This program takes images shot over several frames in the camera’s Stitch Assist

mode, automatically arranges them in order and stitches them together in one simple

procedure. You can shoot and stitch 360º scenes together and save them in the

QuickTime VR format to make them appear to surround you as you view them.

• Computer-Controlled Camera Shooting

RemoteCapture

This program allows your camera’s shutter to be controlled by the computer when

the two are connected. The recorded images are loaded directly into the computer.

Depending on your camera model,

the screen may slightly differ.

11

ArcSoft Camera Suite CD-ROM

• Editing and Applying Special Effects to Images

ArcSoft PhotoImpression

This program makes it easy to convert camera images to sepia colors, apply other

special effects to images, edit them and create greeting cards and calendars.

• Programs for Editing Stills and Movies

ArcSoft VideoImpression

This program provides simple procedures for compiling a movie from multiple movies

or stills and for editing out unwanted frames from movies.

The model of camera you purchased will determine whether

or not an image editing program was supplied with your

product as well as the specific program included in the

software bundle. Please refer to the System Map supplied

with your camera for this information.

NOTICE

12

Camera and Software Compatibility

The Canon Digital Camera Solution Disk contains a number of software programs

and drivers. Check the chart below for the compatibility of your particular camera

model with each program’s special functions.

(1) Since ArcSoft PhotoImpression and ArcSoft VideoImpression are not plug-in

compatible, the Plug-in Module cannot be started and used to download images.

(2) RAW images cannot be taken with the PowerShot S330 DIGITAL ELPH/DIGITAL IXUS

330, PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v

2

, or the PowerShot A100.

However, RAW images taken with other Canon camera models can be converted with

the software included with the PowerShot S330 DIGITAL ELPH/ DIGITAL IXUS 330, the

PowerShot S200 DIGITAL ELPH / DIGITAL IXUS v

2

and the PowerShot A100.

Shooting from

the Computer

Merging Images

Shot in Stitch

Assist Mode

Using the Camera

as a Read-Only

Card Reader

RAW Image

Conversion

(2)

Downloading

Movies

Downloading

Camera Images

Function

ZoomBrowser EX

TWAIN Driver

ImageBrowser

Plug-In Module

(1)

RAW Image Converter

TWAIN Driver

RAW Image Converter

Plug-In Module

(1)

USB Mounter

(Macintosh only)

ZoomBrowser EX

ImageBrowser

ZoomBrowser EX

ImageBrowser

PhotoStitch

RemoteCapture

Model

Software

Add start-up

images or sounds

to camera (My

Camera Settings)

DIGITAL IXUS 330

●

-

●

PowerShot S330/DIGITAL ELPH

●

-

●

PowerShot S200/DIGITAL ELPH

●

-

●

-

DIGITAL IXUS v

2

●

-

●

-

PowerShot A100

●

-

●

-

13

System Requirements

Please install the software on a computer meeting the following minimum requirements.

Windows

Computer Model IBM PC/AT compatible

OS Windows 98 (First or Second Edition)

Windows Millennium Edition (Windows Me)

Windows 2000

Windows XP

CPU Windows 98/Me/2000: Pentium 150 MHz or better

Windows XP: Pentium 300 MHz or better

RAM Windows 98: 32 MB or more

Windows Me/Windows 2000: 64 MB or more

Windows XP: 128 MB or more

Interface USB: only preinstalled Windows 98/Windows Me/Windows 2000/

Windows XP systems with built-in USB ports

Free Hard Disk Space • Canon Utilities

- ZoomBrowser EX: 120 MB or more

(Including the PhotoRecord printing program)

- PhotoStitch: 40 MB or more

- RemoteCapture: 20 MB or more

- RAW Image Converter: 15 MB or more

• Canon Camera TWAIN Driver: 25 MB or more

• Canon Camera WIA Driver: 25 MB or more

• Canon CP-10 Printer Driver: 1 MB or more

(space required for installation)

• ArcSoft PhotoImpression: 125 MB or more

• ArcSoft VideoImpression: 30 MB or more

Display 800 x 600 pixels / 256 colors (8 bit) or better

1,024 x 768 pixels / High Color (16 bit) or better is recommended

(800 x 600 pixels / High Color (16 bit) or better is required to use

ArcSoft PhotoImpression or ArcSoft VideoImpression)

• A CD-ROM drive is required to install the software.

• QuickTime 3.0 or a higher version is required to play the camera’s

movies or save images merged with PhotoStitch in the QuickTime VR

format. QuickTime 5.0 is included on the Canon Digital Camera

Solution Disk.

• A sound card is required to play movie audio tracks.

14

Macintosh:

Computer Model Power Macintosh, PowerBook, iMac, iBook

OS Mac OS 8.6-9.2, Mac OS X (Version 10.1)

CPU PowerPC

RAM Mac OS 8.6-9.2: 20 MB or more of application memory

Mac OS X (Version 10.1): 128 MB or more of RAM

Interface USB: only systems equipped with genuine Apple-brand built-in

USB interfaces

Free Hard Disk Space • Canon Utilities

- ImageBrowser: 20 MB or more

- PhotoStitch: 30 MB or more

- RemoteCapture: 15 MB or more

- RAW Image Converter: 15 MB or more

• USB Mounter: 5 MB or more

• Canon Camera Plug - In Module: 15 MB or more

• Canon CP-10 Printer Driver: 3.8 MB or more

(space required for installation)

• ArcSoft PhotoImpression: 120 MB or more

• ArcSoft VideoImpression: 30 MB or more

Display 800 x 600 pixels / 256 colors or better

1,024 x 768 pixels / 32,000 colors or better is recommended

(800 x 600 pixels / 32,000 colors or better is required to use

ArcSoft PhotoImpression or ArcSoft VideoImpression.)

• Only ImageBrowser and PhotoStitch are compatible with Mac OS X

(Version 10.1). However, they are not compatible with disks formatted

with the Unix File System (UFS).

• USB Mounter is compatible with Mac OS 9.0-9.2.

• A CD-ROM drive is required to install the software.

• QuickTime 5.0 is included on the Canon Digital Camera Solution Disk.

15

Connecting the Camera to a Computer

Selecting a Downloading Method

The downloading method you choose will depend upon the operating system (OS)

on your computer. Read the appropriate page referenced below after checking your

computer system.

Windows Users

• Do not connect the camera to a Windows computer at this point. The USB

Driver must be installed before the camera is connected to the computer

via the USB interface. The USB Driver can be installed very easily, so please

wait until the driver is installed before connecting the camera.

• You should use a household power source to power the camera when it

is connected to the computer.

Downloading Method Page Reference

P. 16

P. 17

Downloading from the camera via the USB interface

Downloading from a card reader

16

Connecting to a USB Port

Connection Precautions

• Connect the camera directly to a USB port on the computer; not through a hub.

The connection may not operate correctly through a hub.

• The connection may not operate correctly if you are using other USB devices,

excluding USB mice or keyboards, at the same time. If this occurs, disconnect the

other devices from the computer and try reconnecting the camera.

• Do not connect two or more cameras to the same computer via the USB

interface. The connections may not operate correctly.

• Never allow the computer to go into standby (sleep) mode while a

camera is connected via the USB interface. If it does happen, never

disconnect the USB cable. Try to awaken the computer with the camera

in the connected state. Some computers will not awaken properly if you

disconnect the camera while they are in standby mode. Please refer to

your computer manual for instructions regarding its standby mode.

1.

Install the software (first-time connection only)

• Windows users see p. 20.

• Macintosh users see p. 76

2.

Attach the supplied USB cable to the computer’s USB port and the

camera’s Digital Terminal.

• You do not need to turn off the computer for this procedure.

• Refer to your computer manual for the location of the computer’s USB ports.

3.

Prepare the camera for communication with the computer.

• Turn the camera’s Mode Dial, Mode Switch or POWER /REPLAY Button to .

Please refer to the Camera User Guide bundled with your camera for instruction

on how to attach / detach the cable.

Page is loading ...

Canon PowerShot A100 Owner's manual

This manual is also suitable for

Canon PowerShot A100 Owner's manual

Related papers

Other documents