Hobart FP400 Datasheet

Hobart
Brand
Hobart
Model
FP400
Type
Datasheet

Hobart FP400 is a powerful food processor with a 2 H.P. two-speed motor and anodized aluminum housing. It features interchangeable stainless steel blades with aluminum frames and processes up to 88 lbs. per minute. The FP400 is perfect for a variety of food preparation tasks, including slicing, shredding, dicing, and more. With its durable construction and easy-to-use design, the FP400 is a valuable addition to any kitchen.

Hobart FP400 is a powerful food processor with a 2 H.P. two-speed motor and anodized aluminum housing. It features interchangeable stainless steel blades with aluminum frames and processes up to 88 lbs. per minute. The FP400 is perfect for a variety of food preparation tasks, including slicing, shredding, dicing, and more. With its durable construction and easy-to-use design, the FP400 is a valuable addition to any kitchen.

Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-39690 – FP400 Food Processor Page 1 of 2
FP400
FOOD PROCESSOR
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
FP400 FOOD PROCESSOR
STANDARD FEATURES
■ Gear transmission.
■ Anodized aluminum housing.
■ Two-speed motor.
■ Triple hopper/cover interlock.
■ Two stationary front legs and two rear legs with
casters for ease of mobility.
■ Processes up to 88 lbs. per minute.
■ Plate speeds 200 and 400 RPM.
ACCESSORIES
❑ 3-pack plates (
1
⁄16",
5
⁄32" slicer plates,
3
⁄16" shredder plate and wall rack).
❑ 6-pack plates (same as 3-pack plus
3
⁄8",
7
⁄32"
slicer plates,
3
⁄8" dicer plate and additional
wall rack).
❑ 3-peg wall rack (designed to hold 3 plates).
❑ Stainless steel accessory cart.
❑ Adjustable height stainless steel lug cart.
❑ Stainless steel pan.
❑ Plastic pan.
❑ Over 40 individual plates available.
*NOTE: The
3
⁄4 dicer grid or the 1" dicer grid
should be used with the
9
⁄16 slicer plate only.
MODEL
❑ FP400-1 (Must also select Feed Hopper Choice)
FEED HOPPER CHOICES
❑ Manual/Tubular Cylinder (PFD-CYL)
Choose one or both:
❑ Manual Push Feed Assembly
❑ Tubular Feeder
❑ Bulk Feed Hopper and Cylinder (Complete).
Specications, Details and Dimensions on Reverse Side.
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 2 of 2 F-39690 – FP400 Food Processor
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
FP400
FOOD PROCESSOR
F-39690 (REV. 10/11) LITHO IN U.S.A. (H-01)
DETAILS AND DIMENSIONS
SPECIFICATION: 2 H.P. two speed motor, 200/400
RPM, anodized case aluminum housing. Plates are
interchangeable with FP350 and are constructed of
stainless steel blades with aluminum frames.
ELECTRICAL SPECIFICATIONS: 208-240/60/3,
7.5 amps, 6 foot, 3 conductor power cord (16 AWG).
Furnished with NEMA L15-20P locking type plug.
WEIGHT: Net Lbs.: Machine 119 lb., Feed Cylinder
13 lb., Manual Push Feeder 11 lb., Continuous Feed
Hopper 27 lb.
  • Page 1 1
  • Page 2 2

Hobart FP400 Datasheet

Hobart
Brand
Hobart
Model
FP400
Type
Datasheet

Hobart FP400 is a powerful food processor with a 2 H.P. two-speed motor and anodized aluminum housing. It features interchangeable stainless steel blades with aluminum frames and processes up to 88 lbs. per minute. The FP400 is perfect for a variety of food preparation tasks, including slicing, shredding, dicing, and more. With its durable construction and easy-to-use design, the FP400 is a valuable addition to any kitchen.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents