Star Manufacturing 70SSA Installation guide

Type
Installation guide

This manual is also suitable for

STAR MANUFACTURING INTERNATIONAL, INC.
Sheet 1 of 3
2M-Z5418 rev. -
MODEL
35SSA, 70SSA
3/5/02 - PMR
The kit should contain the following items. Make sure all items are in the kit.
1 - BUN
BASKET
1 - BUN
SHELF ASSY.
Required Tools: No tools are required.
Caution: Unplug the unit and let cool before proceeding with any work.1.
Remove the following items from the unit (see figure 1).
A. Remove the divider.
B. Remove the wire bun rack.
C. Remove the top hot dog shelf.
D. Remove the bottom hot dog shelf (the tray with holes).
E. Remove the juice tray.
Do not discard these items. Store them for possible future use with the unit.
2.
INSTRUCTIONS
MODEL 35SSA OR 70SSA STEAMER CONVERSION
TO BUNS ONLY UNIT
.
STAR MANUFACTURING INTERNATIONAL, INC.
MODEL
35SSA, 70SSA
BOTTOM HOT
DOG SHELF
JUICE TRAY
DIVIDER
WIRE BUN
RACK
TOP HOT DOG
SHELF
Figure 1.
Install the following items in the unit (see figure 2).
A. Install the new bun shelf assembly next to the existing bun shelf assembly.
B. Install the new wire bun basket.
3.
2M-Z5418 rev. -
Sheet 2 of 3
3/5/02 - PMR
INSTRUCTIONS
MODEL 35SSA OR 70SSA STEAMER CONVERSION
TO BUNS ONLY UNIT
.
STAR MANUFACTURING INTERNATIONAL, INC.
35SSA, 70SSA
MODEL
BUN BASKET
BUN SHELF
ASSEMBLY
Figure 2.
The completed assembly should look like figure 3.
Slide the cover at the front of the bun shelf assembly to control humidity and to fill
with water.
4.
SLIDE BACK
TO FILL WITH
WATER.
Figure 3.
2M-Z5418 rev. -
Sheet 3 of 3
3/5/02 - PMR
INSTRUCTIONS
MODEL 35SSA OR 70SSA STEAMER CONVERSION
TO BUNS ONLY UNIT
.
STAR MANUFACTURING
10 Sunnen Drive, St. Louis, MO 63143 U.S.A.
(800) 807-9054 (314) 781-2777
Parts & Service (800) 807-9054
www.star-mfg.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Star Manufacturing 70SSA Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI