OTT MXQ User manual

Brand: OTT

Model: MXQ

Type: User manual

BOX

4X CPU Cortex-A5

4X GPU Mali-450

User Manual

Android 4.4

KitKat

H.264

1080P Encoder

MXQ is the new generation of MX OTT TV BOX

Preface

Thanks very much for choosing our TV Box. In order to make it more convenient for you

to use proﬁciently, we provide you with a user manual. Please read it carefully before

using and properly keep it for reference.

Statements

We have made every effort to provide the most current information about the product.

We do not grant any guarantees as to the contents of the present instruction manual

and disclaim any implied guarantees concerning market value or suitability for speciﬁc

purposes.

The information contained here is an instruction intended to enable the correct usage

and maintenance of the receiver.

We reserve the right to introduce amendments, changes or translations of the user

manual without prior notiﬁcation thereof. For this reason, we recommend you regularly

visit our website in order to obtain the latest information.

TT TV BOX

TV BOX

Chapter 1 System Introduction

1. 1 Key Features

1. 2 Environment for System

1. 3 Package Contents

Chapter 2 Remote Controller

2. 1 Introduction of Remote

Chapter 3 System Connection

3. 1 AV Connection

3. 2 HDMI Connection

3. 3 Startup

Chapter 4 Home

Chapter 5 Apps

5.1 PPPoE

5.2 Browser

5.3 Media Centre

5.4 Samba

5.5 File Browser

5.6 Download

5.7 App Installer

5.8 Muti-interaction (Airplay/Miracast)

5.9 OTA update

Chapter 6 Settings

6.1 Network

6.2 Display

6.3 Advanced

6.4 Other

Chapter 7 Upgrade Steps

Chapter 8 Trouble Shotting

Contents

Chapter 1 System Introduction

1. 1 Key Features

Support many kinds of IPTV and OTT TV programmes.

Support FHD H.265, VC-1, H.264, MPEG-2 and many other formats such as MPEG-1,

MPEG-2, MPEG-4, DIVX, REALMEDIA and so on.

Video formats include hevc, avi, mpg, vob, rmvb, mkv, m2ts, ts and so on.

Photo formats include JPEG, BMP and PNG up to 80M pixels.

Audio formats include MP3,WMA,WAV,AC3, AAC and so on.

Support SD/SDHC/MMC cards.

Support four USB 2.0 host connectors with maximum output current of 1.5A/5V.

Support standard RJ45 cable network connection and wireless network connection.

Support infrared remote controller operation.

Operation : Temperature limitation: 0--40℃; Humidity limitation: 20--80%.

Storage: Temperature limitation: -20--50℃; Humidity limitation: 10--90%.

1. 2 Environment for System

1. 3 Package Contents

Accessories Quantity

Power adaptor

Remote control

HDMI cable

User manual

MUTE:Press to turn down the volume.

SETUP: Fast key to go to system setup.

POWER: Press to standby.

APP: Fast key to go to android application.

MENU: Press to choose function menu of corresponding

application in video, music, photo and website.

Navigation:Press to navigate left/right/up/down.

Press OK to conﬁrm your choice.

Number keypad 0-9:Press to input Arabic number.

RETURN: Press to return back to previous menu.

HOME: Fast key to go back to main menu.

VOL: Press to increase/decrease the volume.

Cursor:Press to use the navigation button as cursor.

Backspace:Press to backspace the input.

TT TV BOX

Chapter 2 Remote Controller

2. 1 Introduction of Remote

TV BOX

Chapter 3 System Connection

3. 1 AV Connection

3. 2 HDMI Connection

USB -4

AV cable

Router

Adaptor cable

Ampliﬁer

USB-3

USB-2

USB-1

SD/MMC

Network cable

Television

SD/MMC

USB-1 USB-2

USB-3

USB-4

SPDIF

HDMI ETHERNET

5V DC

Spdif

Coaxial cable

HDMI cable

Home Theater Speaker 5.1 Channel

SETUP

APP

SETUP

APP

TV CONTROL AREA: Press to learn from the TV IR remote to control TV.

TT TV BOX

TV BOX

3.3 Startup

Turn on the TV box while indicator light is blue. Enter into main menu at about 30 seconds.

Chapter 4 Home

There are apps which you usually use.

You can add the apps according to your own preference.

Please tick the apps you need. Tick it again when you don’t need it.

Chapter 5 My Apps

Move to “My Apps”, Press OK to enter in.

You can see icons referring to different function on the picture.

5.1 PPPoE

Move to “PPPoE” icon, Press OK to enter in. You can conﬁgure PPPoE here.

5.3 Media Center

Move to “Media Center ” icon, You can play all your prefer media here.

TT TV BOX

TV BOX

5.2 Browser

Move to “Browser”. Press OK to enter in.

It is a convenient way for you to go to your desired website.

Notice: Please go to the system setting to set the internet connection before entering into the

website.

5.4 Samba

Move to “Samba”. Press OK to enter in.

The system will search the share ﬁles automatically.

5.5 File Browser

Move to “File browser”. Press OK to enter into the device list.

When inserting with USB device or SD/ SDHC/ MMC cards, the sign “Device is mounting”

will be shown on the screen.

Here you can cut, copy, paste and move the ﬁles and folder between the local disk and external

storage card.

Miracast: Please make sure TV box and mobile phone under the same WI-FI

environment .Press “Miracast” on TV box. It will ﬁnd peers automatically, and click “setting”

on your mobile phone, enter into “WLAN”, Click “Menu” to choose “WLAN Display” on your phone.

Choose to share ﬁles.

Miracast

5.8 Muti-interaction

Move to “Airplay” icon or “Miracast” icon, Press OK to enter in.

Airplay: Download airplay application according to the model of the mobile phone. Enter into

Airplay, connect with the same WI-FI hotspot. Play video, picture, or music on your phone. Click

the “airplay” icon on the phone to share ﬁles.

Airplay

TT TV BOX

TV BOX

5.6 Download

Move to “Downloads”. Press OK to enter in. You can check the status here when

downloading APKs from the internet.

5.7 App Installer

Move to “App Installer”. Press OK to enter in.

You can install software by this app installer function. Please ﬁrst download your desired

software by apk formats from the computer to the USB. You will choose your desired

device in order to scan the apks.

Press OK to install your desired software.

After the installation ﬁnished, the software icon will be shown on the applications menu.

5.9 OTA update Optional

Move “OTA update” icon, press OK to enter.

Click “online update” If there is an update in server, you can choose to download it.

After upgrade is ﬁnished, system will restart automatically.

TT TV BOX

TV BOX

Chapter 6 Settings

6.1 Network

Wi-Fi

Select “Wi-Fi”, System will start scanning available Wi-Fi networks around you automatically.

Press OK to choose your Wi-Fi network and enter your password.

After authenticating IP address, when “connected” is shown, Wi-Fi is available now.

Notice: If Wi-Fi connection failed, please try again.

TT TV BOX

TV BOX

Ethernet:

Select “Ethernet” System will start scanning Ethernet automatically.

When the IP address appears, the Ethernet connected.

6.2 Display

Move to “Display”.

Here you can set wallpaper, HDMI audio output mode, turn on/off hide status bar,

display position, choose the time of start screen saver.

6.3 Advanced

Move to “Advanced” to choose advanced settings. Here you can set Miracast, remote control,

CEC control, location, orientation, home screen and digital audio output.

6.4 Other

Move to “Other” to see more TV Box information.

You can do system update and adjust more settings here.

TT TV BOX

TV BOX

7.1 Please unzip the upgrade package to the SD card .There will be three

ﬁles in the root of the SD card as follow,

factory_update_param.aml (Some upgrade packages don’t have this ﬁle)

xxx.zip (the upgrade package zip ﬁle)

recovery

7.2 Insert HDMI cable and SD card with the box.

(connect the other side of the HDMI cable to the TV HDMI port.

7.3 Insert a stick into AV port.

There is a reset button inside AV port.

7.4 Insert power adaptor.

7.5 You can stop pressing the reset button until you see the android robot. And use

Press

And keep pressing the button.

(still pressing the button)

the remote to choose apply update from EXT" "

choose Update from sdcard" "

choose xxx.zip (the upgrade package ﬁle) and press OK. " "

Chapter 7 Upgrade Steps

Stick

SD card

Stick

SD card

TT TV BOX

TV BOX

Chapter 7 Trouble Shotting

Under no circumstances should you try to repair the TV Box by yourself, as this will invalidate

the warranty. Do not open the TV Box as there is a risk of electric shock. If a fault occurs, ﬁrst

check with points listed below before taking the TV Box for repair. If you are unable to remedy

a problem by following hints, consult your dealer for help.

Problem

Solution

No power

-Check if the power adaptor is properly connected to the power

and the TV Box.

-Press the power on the remote controller to turn on the power.

No picture

-Reconnect with HDMI cable or AV cable.

-Check if the TV is switched on.

No sound or distorted

sound

-Adjust the volume.

-Check that the speakers are connected correctly.

No audio or digital

output

-Check the digital connections.

-Check if your ampliﬁer is set correctly.

The box does not respond

to the Remote Control

-Aim the remote control directly at the sensor on the front

of the TV Box.

-Reduce the distance to the TV Box.

-Replace the batteries in the remote control.

Player does not respond to

some operating commands

during playback

-Operations may not be permitted. Refer to the user manual.

-Possibility of system halted, re-insert with power adaptor

to restart.

No sound during movies

playback

-The audio codec may not be supported by the TV Box. You

can change to the supported audio on playing menu.

-Check the volume.

The contents of the USB

ﬂash drive cannot be read

-The USB ﬂash drive format is not compatible with the box.

-If one of the USB can not be read, please turn off the TV

Box for 30seconds and restart the TV Box.

Slow operation of the

USB ﬂash drive

-Big ﬁle size or high resolution USB ﬂash drive takes

longer time to read and display on the TV screen.

No sound with HDMI

connection

-Check the connection between the TV and the HDMI

jack of box.

-Check your TV system setup.

-Check the volume.

The TV screen is blank

and the player LED is

blinking

-Turn off your TV Box, wait 30 seconds, turn it on again.

-If under HDMI status, check if HDMI connection is cor-

-rect or change another HDMI cable set the output

resolution of this TV Box into 720p.

7.6 You will see --Install / sdcard... It means the box is updating." "

After upgrade, you can see Install from sdcard complete at the bottom." "

7.8 Finished upgrade. You can see the Welcome interface." "

7. 7 Use remote to choose reboot system now and press OK" "

or plug the power adaptor again to reboot the box.

Tips:Youcancheckthebuildnumberinsettingtoconfirmthat

youhaveupdatedtheboxsuccessfully.

TT TV BOX

⾮常感谢您选择安卓多媒体播放器,为了⽅便您尽快熟悉使⽤,我们为您配备了⽤户使⽤

说明书,在使⽤前请认真阅读并妥善保存,以备参考。

序⾔

本产品内含⾃动联⽹功能该功能可帮助⽤户⾃⾏联接指定⽹站服务器并按⽤户选定的内

容进⾏下载播放,本功能旨在简化客户上⽹登陆⽹站使⽤⽹站提供的搜索服务时间，⽤户

所下载播放内容及来源均来⾃互联⽹,本产品不对内容的正确性、合法性及存在的稳定性

负责，希望⽤户遵守国家相关法律法规,不得下载播放任何反动、⾊情及暴⼒等不健康内

容，本产品亦不能因为⽤户在⽹络⽆法联接、联接不稳定及⽹站服务器停机、关闭所造

成的损失⽽负责;同时,安卓作为⼀个开放式的平台,应⽤软件数量庞⼤,来源不同开发团队，

因此存在软件和机器不兼容的问题，⼀些应⽤软件在本机中不能正常安装或使⽤，不属

本机质量问题。当以上情况发⽣时,本产品依然可作为多媒体播放器使⽤。

本公司已经对本说明书进⾏了严格仔细的校勘和核对，我们不能保证完全没有任何错误

和疏漏。同时因为产品更新升级较快,本说明书的内容可能与实际产品存在不相符的情况，

恕不另⾏通知,请访问本公司⽹站查询。

说明书中的图⽚仅供参考,如果有少数图⽚与产品的实际显⽰不符，请以产品实际显⽰为

准。

声明

⼀系统介绍

1.1 系统主要特点

1.2 系统适应环境

1.3 基本配件

⼆、遥控器

2.1 遥控器说明

三、系统连接

3.1 AV 连接

3.2 HDMI 连接

3.3 系统开机

四、主页

五、我的应⽤

5.1 宽带拨号

5.2 浏览器

5.3 媒体中⼼

5.4 ⽹上邻居

5.5⽂件管理

5.6 下载

5.7 应⽤安装

5.8 多媒体互动(Airplay/Miracast)

5.9 OTA升级

六、设置

6.1 ⽹络设置

6.2 显⽰设置

6.3 ⾼级设置

6.4 其他设置

七、升级步骤

⼋、常见问题解答

中⽂⽬录⼀、系统介绍

1.1 系统主要特点

采⽤Quad-Core Cortex-A5中央处理器，应⽤Android 4.4操作系统。。

⽀持⽹络在线视频（IPTV/OTTTV节⽬），可连接⽤户⾃⼰的后台⽹站。

⽀持H.265、H.264、MPEG-2等三⼤主流⾼清格式，并同时⽀持MPEG-1、MPEG-2、

MPEG-4、DIVX、REALMEDIA等其他常⽤格式。

⽀持⽀持hevc、avi、mpg、vob、rmvb、mkv、m2ts、ts等多种视频类型⽂件。

⽀持⾼达⼋千万像素的JPG、BMP、PNG图⽚格式。

⽀持MP3、WMA、WAV、AC3、ACC等多种⾳频格式播放。

⽀持SD/SDHC/MMC存储卡的读取。

⽀持四路2.0⾼速USB接⼝，最⼤输出电源1.5A/5V。

⽀持标准RJ45有线⽹络连接和Wi-Fi⽆线⽹络连接。

⽀持红外线遥控器操作。

1.2系统适应环境

操作：温度限制:0--40℃,湿度限制:20--80%。

存储：温度限制:-20--50℃，湿度限制:10--90%。

1.3基本配件

配件名称

遥控器

说明书

电源适配器

数量

HDMI线

TT TV BOX

TV BOX

路由器

网线

电视机

USB -4

AV 线

电源

功放

USB-3

USB-2

USB-1

SD/MMC

USB-1 USB-2

USB-3

USB-4

SPDIF

HDMI ETHERNET

5V DC

同轴线

HDMI 线

待机键：选择按键待机。

静⾳键：关闭或打开全部声⾳。

设置键：快捷键进⼊设置界⾯。

安卓应⽤：快捷键进⼊安卓系统应⽤程序。

菜单键：播放本地视频⽂件、⾳乐、图⽚的设置选项

菜单键，以及在浏览⽹站时的功能设置键。

返回键：选择返回上⼀个菜单页⾯。

主菜单键：快捷键回到主菜单。

⾳量键：调⾼与调低⾳量。

导航键：进⾏上下左右操作。

OK键：确认操作。

光标键：长按此键变成光标功能，通过导航键进⾏上下左右操作。

数字字母键：选择阿拉伯数字或英⽂字母输⼊。

空格键：在输⼊⽂字的时候选择空格键.

TT TV BOX

⼆、遥控器

2.1 遥控器说明

3.1 AV 连接

3.2 HDMI 连接

TV BOX

三、系统连接

家庭影院

SETUP

APP

SETUP

APP

学习功能区：通过学习后可控制电视机。

TT TV BOX

TV BOX

五、我的应⽤

点击“我的应⽤”，进⼊我的应⽤界⾯。

3.3 系统开机

插上电源，机器亮蓝⾊指⽰灯，约30秒左右进⼊主页⾯。

四、主页

主页显⽰常⽤应⽤程序。

点击右下⾓“+”号可以根据⾃⼰的喜好，在主页添加或删除应⽤程序。“√”选择所要添加

的应⽤程序，取消“√”删除应⽤程序。

5.1 宽带拨号

在应⽤程序中选择“宽带拨号”图标，点击进⼊界⾯。

输⼊帐号密码进⾏拨号。根据喜好选择是否开机⾃动拨号。

TT TV BOX

TV BOX

5.2 浏览器

5.4 ⽹上邻居

在应⽤程序中选择“⽹上邻居”图标，点击进⼊界⾯。

在多媒体界⾯选择“浏览器”图标进⼊⽹页浏览界⾯。请先确保⽹络连接正常，点击⽹址

输⼊栏，⽹络键盘会弹出，输⼊⽹址，点击确认键进⼊⽹页。可浏览各种⽹站，在线观看

⽹络电影。

5.3 媒体中⼼

在应⽤程序中选择“媒体中⼼”图标，点击进⼊界⾯。可以播放各种媒体。

5.5⽂件管理

在应⽤程序中选择“⽂件管理”图标，点击进⼊界⾯。进⼊后可以点击选择栏第⼆项，对⽂

件进⾏选择、复制、剪切、粘贴等操作。

TT TV BOX

TV BOX

5.6 下载

在应⽤中选择“下载”图标,进⼊下载内容进程界⾯。

5.7 应⽤安装

选择“应⽤安装”图标,进⼊应⽤安装程序界⾯

您可以通过应⽤安装选项进⾏安装apk应⽤软件。请将事先存有APK⽂件的U盘或SD卡插⼊

相应接⼝,系统会⾃动扫描设备。

选择您想安装的应⽤软件,点击安装该应⽤软件。安装完成后,该软件的图标将会显⽰在应⽤程

序的主界⾯。

5.8 媒体互动(Airplay/Miracast)

在应⽤程序中选择“Airplay”或者“Miracast”图标，点击进⼊界⾯

Airplay：按照⼿机型号在⼿机⾥下载并安装适⽤的Airplay，点击设备中的Airplay，连接

同⼀个WI-FI热点。在⼿机⾥播放视频，图⽚，⾳乐下有软件图标，点击即可进⾏多屏互动。

TT TV BOX

TV BOX

Miracast：请确保设备与⼿机在同⼀个WiFi环境下，在“应⽤”中选择“Miracast”，然后

打⼿机（能使⽤Miracast的⼿机）“设置”，进⼊“WLAN”，点击⼿机“菜单”键选择

“WLAN Display”，在可⽤设备中选择您所要的设备，点击检测到设备即可。

5.9 OTA升级

在应⽤程序中选择“OTA升级”图标，点击进⼊界⾯。

点击online update按钮。

如果服务器有更新，就会弹出下载的对话框

提⽰下载更新

六、系统设置

“√”“⽆线⽹络”，进⼊⽆线⽹络设置界⾯系统会开始⾃动扫描您周围的可⽤⽆线⽹络。

6.1 ⽹络设置

⽆线⽹络

选择连接到您的⽆线⽹络接⼊点,然后直接输⼊密码。系统显⽰正在获取IP地址,⽹络已经

连接,⽆线⽹络可⽤。提⽰:有时候⽆线⽹络不稳定,连接失败了,请多试⼏次。

TT TV BOX

TV BOX

连接⽹线，“√”“有线⽹络”，系统会⾃动连接以太⽹。

当显⽰IP地址，以太⽹连接成功。

有线⽹络

6.4 其他设置

6.2 显⽰设置

6.3 ⾼级设置

选择“显⽰设置”根据偏好设置显⽰。

选择图标进⾏⾼级设置。

选择“其他设置”图标，进⼊媒体盒版本信息界⾯。这⾥您可以进⾏系统升级和更多的设置。

TT TV BOX

TV BOX

7.1 请把升级包解压到SD卡根⽬录,SD卡⾥⾯会有以下的三种⽂件。

factory_update_param.aml (根据升级包不同，有的升级包没有这个⽂件。)

xxx.zip (升级包的zip格式⽂件）

recovery

7.2 插⼊⾼清线和SD卡。

(⾼清线的另⼀端连接电视，如下图。)

7.3 在AV⼝插⼊⼀根⼩⽊棍。

(AV⼝⾥⾯有⼀根复位键)

7. 4 插上电源。

7.5 看到机器⼈出现在升级界⾯就可以松开⼩⽊棍，⽤遥控选择

⽤⼩⽊棍去按复位键，保持不动。

(依然按着复位键)

“ apply update from EXT ”

再选择“Update from sdcard”

“ xxx.zip (the upgrade package ﬂe)” ⽤遥控器按OK.

七、升级步骤

HDMI ⾼清线

⼩⽊棍

SD卡

HDMI ⾼清线

SD卡

按下去

保持按着

SD卡

HDMI ⾼清线

电源

Page is loading ...

OTT MXQ User manual

Brand: OTT

Model: MXQ

Type: User manual

Download PDF

report

in other languages

日本語: OTT MXQ ユーザーマニュアル

OTT MXQ User manual

OTT MXQ User manual

in other languages

Related papers

Other documents