2. Computers & electronics
  3. Audio & home theatre
  4. Bluetooth music receivers
  5. OC ACOUSTIC
  6. OC-8000
OC-8000

OC ACOUSTIC OC-8000 User guide

  • Hello! I have analyzed the provided user manual for the OC ACOUSTIC Newport Plug-in Speaker. This document covers the basics of setting up your speaker, including touch control, installing it to wall, powering it on and pairing with Bluetooth. You can also find out how to use party mode and charge your phone or tablet. I'm here to answer your questions about this device.
  • How to turn on the speaker?
    How to pair speaker with device?
    How to enable party mode?
Designed in Orange County
California
Quick Start Guide
Touch Control
Installing to wall
Power on
Pairing with Bluetooth
Listening to music
Welcome to Newport
Touch Control
USB Type-A Port
Unfold the prongs
and plug into wall
Charge Phone / Tablet Only
Less is More!
Controlling the volume, play, and pause of your music are done completely through your connected device.
There are no controls on the Newport Plug-in Speaker.
ADD (Party Mode):
Press 3-5 seconds
to add more speakers
Power:
Press to turn on Newport
Wall Plug:
Fold-out the prongs and plug the speaker
into the wall outlet.
1
Once the speaker is pluged in, press the power button
to turn the speaker on. It will automatically enter
Bluetooth pairing mode.
Go to Bluetooth settings on your phone, tablet or
computer to nd the device named
Newport_xxxxx.
2 3
Bluetooth
On
Newport_xxx1
Newport_xxx2
Available Devices
Next time speaker and connected device
will pair automatically...
The Newport Plug-in Speaker will always be on as long as your connected
device is within Bluetooth range. Once your connected device is out of
Bluetooth range, the speaker will be disconnected and in standby mode.
When the connected device returns to the Bluetooth range, the speaker will
automatically detect and reconnect it.
When there are more than one Newport Plug-in Speakers, you can enable
Party mode. To learn more, please go to ocacoustic.com’s support page on
how to operate Party mode.
USB Type-A port is for charging the phone/tablet only.
•Transducer: 1 x 52mm full range
•Frequency Response: 20Hz to 20KHz
•System Sensitivity: 80dB SPL @1W 1 meter
•Power requirement: AC 100~240V 50/60Hz
•Bluetooth version: 5.1
•Supported audio formats: A2DP / AVRCP
•Dimensions (W x H x D): 3.64” x 3.35” x 2.48”
•Weight: 0.47lb
To learn more, troubleshooting, operation tips, please visit
www.ocacoustic.com. Please click support page for more information.
Please register your product via the website. We can inform you about new
Enjoy Newport Plug-in Speaker!
4
/