JS-65 Loudspeaker Stand
Quick Start Guide
•
Box Contents
2x JS-65 Loudspeaker Stands
8x Rubber Feet (Installed)
Bx
Foam Speaker Protectors
Assembly
The rubber feet are pre-installed but can be adjusted to level the
stand where needed.
To
protect the bottom
of
the speaker 8 Foam Speaker
Protectors are included to be placed on the top
of
the stand.
We
recommend that they be staggered with the front pads being
closer together than the rear pads.
Specifications
Height (with Feet) 26in (673mm)
Height (Without Feet) 26in (663mm)
Width 13in (330mm)
Depth 14in (360mm)
Angle Front Tilt
Supported Speaker Weight
Up
to
221bs
(10kg)
~
HARMAN
Harman International Industries, Incorporated.
~
8500 Balboa Blvd, Northri
dge
CA
91329 United States.
European Representative: Harman International Industries, Incorporated.
EMEA
Liaison Office, Danzigerkade 16G, 1013
AP
Amsterdam,
The
Netherl
ands
.
UK
Business Address: Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead,
Hertfordshire, HP3
9TD
, United Kingdom.
© 2022 Harman International Industries, Incorporated. All Rights Reserved.
JBL
is a trademark
of
Harman International Industries, Incorporated registered in the United
States and other countries. ·
Features, Specifications,
and
Appearance subject to change without notice.
JS-65 Loudspeaker Stand Quick Start Guide I
Rev
1.0 20220831 I Part No. 950-0626-001
0 0
0 0
Front
of
Stand
i
~~
7
141n
(360mm)
~
-J
I
Top
I
f---
13in (330mm
r--J
26. Sin (673mm)
26.1in (66
V
Front
V l
JBL.com/Specialty-Audio/
3mm)
V Side V
