2. Fisher & Paykel
  3. RDV3-366-L
RDV3-366-L

Fisher & Paykel RDV3-366-L, RDV3-366-N, RDV3-366-N 36 Inch Dual Fuel Range 6 Burners, RIV3-365, RIV3-365 36 Inch 5 Zones Induction Range, RIV3-365 36 Inch 5 Zones Self Cleaning Induction Range, RIV3-365 Selfcleaning Induction Range, vRIV3-365 36 Inch 5 Zones Induction Range User guide

  • I have reviewed the datasheet for the Fisher & Paykel Range Backguard BGRV2-3036H, which includes detailed product dimensions, such as overall height, width, and depth, along with specific measurements for the angled vent trim and racks. I am ready to answer your questions about this product.
  • What is the overall height of the backguard with angled vent trim?
    What is the overall width of the backguard?
    What is the model number of the backguard?
DATA SHEET
36" Professional Range Backguard
with Angled Vent Trim
DATE: 08.02.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (3/32").
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
0 5 10 20
inches
35 7/8"
30"
35 7/8"
B
B
d
A
i
h
k
j
FRONT VIEW
PLAN VIEW
PROFILE VIEW
c
DATUM : BOTTOM OF ANGLED VENT TRIM
DATUM : BACK OF BACKGUARD
DATUM : BACK OF BACKGUARD
BGRV2-3036HNOT TO SCALE
g
f
f
e
RGV2-366/
RDV2-366
(illustrated)
1 5/16"
Model no:
BGRV2-3036H
(refer page 2 for metric measurements)
Product Dimensions
in
A Overall height of backguard with angled vent trim
30"
B Overall width of backguard
35 7/8"
C Overall depth of backguard and racks
10 3/8"
D Height of backguard
26 1/2"
E Height of angled vent trim
3 1/2"
F Depth of angled vent trim
2 7/8"
G Depth of backguard
1 5/16"'
H Depth of racks
9 1/16"
I Width of racks
33 15/16"
J Distance from top of backguard to top of racks
5 3/8"
K Distance from bottom of angled vent trim to bottom of racks
18 7/8"
NOTE: Angled vent trim supplied with BGRV2-3036H.
Remove flat vent trim and replace with angled vent trim.
INDICATES PRODUCT DATUM -------------------------------------------
DATA SHEET
36" Professional Range Backguard
with Angled Vent Trim
DATE: 08.02.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (3/32").
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
0 100 200 400
millimetres
912
B
912
B
763
d
A
i
h
k
j
FRONT VIEW
PLAN VIEW
PROFILE VIEW
c
DATUM : BOTTOM OF ANGLED VENT TRIM
DATUM : BACK OF BACKGUARD
DATUM : BACK OF BACKGUARD
BGRV2-3036HNOT TO SCALE
g
f
f
e
RGV2-366/
RDV2-366
(illustrated)
33
Model no:
BGRV2-3036H
(refer page 1 for imperial measurements)
Product Dimensions
mm
A Overall height of backguard with angled vent trim
763
B Overall width of backguard
911
C Overall depth of backguard and racks
264
D Height of backguard
673
E Height of angled vent trim
90
F Depth of angled vent trim
72
G Depth of backguard
33
H Depth of racks
230
I Width of racks
862
J Distance from top of backguard to top of racks
136
K Distance from bottom of angled vent trim to bottom of racks
480
NOTE: Angled vent trim supplied with BGRV2-3036H.
Remove flat vent trim and replace with angled vent trim.
INDICATES PRODUCT DATUM -------------------------------------------
/