2. Dymo
  3. LabelWriter 550 Turbo
LabelWriter 550 Turbo

Dymo LabelWriter 550 Turbo Operating instructions

  • Hello! I've reviewed the specification document for LabelWriter 550 Turbo. It outlines the device's radio frequency exposure compliance, showing that it operates at a low RF output power and is exempt from routine SAR evaluations. I'm ready to answer your questions about this document and the device.
  • What is the minimum distance for the EUT?
    What is the maximum RF Output Power of the transmitter?
    Is the device subject to routine SAR evaluation?
Safety Human Exposure
1.1 Radio Frequency Exposure Compliance
1.1.1 Electromagnetic Fields
RESULT: Pass
Test Specification
Test item :
Label maker
Identification / Type No. :
LabelWriter 550 Turbo
IC:
11034A-LW550T
HVIN :
LabelWriter 550 Turbo
Test standard :
RSS-102 Issue 5 March 2015
Measurement Record:
The minimum distance for the EUT is less than 5mm.
The maximum RF Output Power of the transmitter is -32.05 dBm (65.33dBuV/m), which is far below the
SAR exclusion threshold level 71 mW ≈ 18.51 dBm.
Hence the EUT is exempted from routine evaluation limits (SAR Evaluation) according to clause 2.5.1 of
RSS-102 Issue 5.
/