Corning 072E81-T3131-24 Installation guide
- Category
- Fiber optic cables
- Type
- Installation guide
The Corning 072E81-T3131-24 is a single-mode optical fiber cable designed for use in high-speed data transmission applications. It features 24 fibers, each with a core diameter of 9 microns and a cladding diameter of 125 microns. The cable has a tight-buffered construction, with each fiber surrounded by a protective layer of acrylate. The outer jacket is made of flame-retardant PVC, making it suitable for use in indoor and outdoor applications.
The Corning 072E81-T3131-24 is a single-mode optical fiber cable designed for use in high-speed data transmission applications. It features 24 fibers, each with a core diameter of 9 microns and a cladding diameter of 125 microns. The cable has a tight-buffered construction, with each fiber surrounded by a protective layer of acrylate. The outer jacket is made of flame-retardant PVC, making it suitable for use in indoor and outdoor applications.
Features and Benefits
900 µm buffered fibers
Easy, consistent stripping
6-, 12- or 24-fiber jacketed subunits
Quick and easy identification
All-dielectric cable construction
Requires no grounding or bonding
Flame-retardant jacket
Rugged and durable
Standards
Listings National Electrical Code®
(NEC®) OFNR, FT-4
Design and Test Criteria UL-1666 and CSA FT-4 (for
riser and general building
applications); ICEA S-83-
596
Corning MIC® unitized riser cables are designed for use
in riser and general purpose environments for intrabuil-
ding backbone installations. These multifiber cables use
individually jacketed 900 μm buffered fibers enabling ea-
sy, consistent stripping and facilitating termination. The
6-, 12-, or 24-fiber subunits allow quick and easy identi-
fication and are surrounded by dielectric strength mem-
bers and protected by a flame-retardant outer jacket.
The all-dielectric cable construction requires no groun-
ding or bonding, making these cables ideal for routing in-
side buildings including riser shafts, to the telecommuni-
cations rooms and workstations. The MIC Unitized Riser
Cables meet the application requirements of the National
Electrical Code® (NEC®) Article 770 and the ICEA S-83-
596 test criteria. They are OFNR and FT-4 listed.
This cable is available in 12 different jacket colors – blue,
orange, green, brown, slate, white, red, black, yellow,
violet, rose and aqua. The colored jacket allows for easy
visual identification of the cables. The standard jacket
color will be determined by the dominant fiber type in
the cable and will use the standard part numbers shown
here. Contact Customer Care at 1-800-743-2675 to order
other color options.
MIC Unitized Riser Cables, 36 Fibers MIC Unitized Riser Cables, 36 Fibers
Ripcord
Dielectric Strength
Members
Dielectric Central
Element
Tight-Buffered
Fiber
Flame-Retardant
Subunit Jacket
Flame-Retardant
Outer Jacket
MIC® Unitized Tight-Buffered Cables,
Riser, 36-144 Fibers
Family Spec Sheet 0053_NAFTA_AEN
Page 1 | Revision date 2020-03-09
MIC Unitized Riser Cables, 144 Fibers MIC Unitized Riser Cables, 144 Fibers
Flame-Retardant
Outer Jacket
Ripcord
Dielectric Central
Element
Dielectric Strength
Members
Tight-Buffered
Fiber
Flame-Retardant
Subunit Jacket
Specifications
Temperature Range
Storage -40 °C to 70 °C (-40 °F to 158 °F)
Installation -10 °C to 60 °C (14 °F to 140 °F)
Operation -20 °C to 70 °C (-4 °F to 158 °F)
* Note: Corning recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation tempera-
ture range specifications for best installation results.
Mechanical Characteristics Cable
Max. Tensile Strength, Long-Term 89 lbf (400 N)
Max. Tensile Strength, Short-Term 1320 N (300 lbf)
Fiber Count Subunit Diameter Nominal Outer
Diameter
Min. Bend
Radius Installa-
tion
Min. Bend
Radius Operation
Weight
36 4.40 mm
(0.17 in)
14.8 mm
(0.58 in)
222 mm
(8.7 in)
148 mm
(5.8 in)
181.3 kg/km
(121.8 lb/1000 ft)
48 4.40 mm
(0.17 in)
17.8 mm
(0.69 in)
267 mm
(10.5 in)
178 mm
(7.0 in)
258.4 kg/km
(173.6 lb/1000 ft)
60 5.55 mm
(0.22 in)
17.9 mm
(0.7 in)
268.5 mm
(10.6 in)
179 mm
(7.0 in)
233.5 kg/km
(156.9 lb/1000 ft)
MIC® Unitized Tight-Buffered Cables,
Riser, 36-144 Fibers
Family Spec Sheet 0053_NAFTA_AEN
Page 2 | Revision date 2020-03-09
Fiber Count Subunit Diameter Nominal Outer
Diameter
Min. Bend
Radius Installa-
tion
Min. Bend
Radius Operation
Weight
72 5.55 mm
(0.22 in)
18.6 mm
(0.73 in)
279.0 mm
(11.0 in)
186 mm
(7.3 in)
276.0 kg/km
(190.0 lb/1000 ft)
96 6.80 mm
(0.27 in)
18.5 mm
(0.73 in)
277.5 mm
(10.93 in)
185 mm
(7.28 in)
276.5 kg/km
(185.8 lb/1000 ft)
144 6.80 mm
(0.27 in)
23.5 mm
(0.93 in)
352.5 mm
(13.88 in)
235 mm
(9.25 in)
433.6 kg/km
(291.37 lb/1000 ft)
Chemical Characteristics
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Transmission Performance
Multimode
Fiber Core Diameter (µm)62.5 50 50 50 50
Fiber Category OM1 OM2 OM3 OM4 OM4 Extended
Distance
Fiber Code KTTTT
Performance Option Code 30 31 80 90 91
Wavelengths (nm)850/1300 850/1300 850/1300 850/1300 850/1300
Maximum Attenuation (dB/km)3.4/1.0 2.8/1.0 2.8/1.0 2.8/1.0 2.8/1.0
Serial 1 Gigabit Ethernet (m)300/550 750/600 1000/600 1000/600 1100/600
Serial 10 Gigabit Ethernet (m)33/- 150/- 300/- 550/- 600/-
Min. Overfilled Launch (OFL)
Bandwidth (MHz*km)200/500 700/500 1500/500 3500/500 3500/500
Minimum Effective Modal
Bandwidth (EMB) (MHz*km)220/- 950/- 2000/- 4700/- 5350/-
* 50 µm multimode fiber (OM3/OM4/OM4+) meets 0.75 ns optical skew when used in all Corning Plug and Play™/EDGE™ systems solutions.
* 50 µm multimode fiber (OM4) T90 10 Gigabit Ethernet distance assumes 1.0 dB maximum total connector/splice loss.
* 50 µm multimode fiber (OM4) T91 10 Gigabit Ethernet Distance assumes 0.7 dB maximum total connector/splice loss.
MIC® Unitized Tight-Buffered Cables,
Riser, 36-144 Fibers
Family Spec Sheet 0053_NAFTA_AEN
Page 3 | Revision date 2020-03-09
Single-mode
Fiber Name SMF-28e® fiber SMF-28® Ultra fiber
Fiber Category G.652.D G.652.D/G.657.A1
Fiber Code E Z
Performance Option Code 31 31
Wavelengths (nm)1310/1383/1550 1310/1383/1550
Maximum Attenuation (dB/km)0.4/0.4/0.4 0.4/0.4/0.4
* Improved attenuation and bandwidth options available.
* Bend-insensitive single-mode fibers available on request.
* Contact a Corning Customer Care Representative for additional information.
Ordering Information | Note: Contact Customer Care at 1-800-743-2675 for other options.
6HOHFW¿EHUFRXQW
6WDQGDUGRIIHULQJV
6HOHFW¿EHUFRGH
. PPXOWLPRGH20
7 PPXOWLPRGH
20202020
( 6LQJOHPRGH26
60)H
= 6LQJOHPRGH26
60)8OWUD¿EHU
'H¿QHVFDEOHW\SH
0,&0,&8QLWL]HG
FDEOHIDPLO\
'H¿QHVRXWHUMDFNHW
5LVHU
6HOHFWQXPEHURI¿EHUV
SHUVXEXQLW
¿EHUVSHUVXEXQLW
¿EHUV
7 ¿EHUVSHUVXEXQLW
¿EHUV
< ¿EHUVSHUVXEXQLW
¿EHUV
'H¿QHVWHQVLOHVWUHQJWK
6HH6SHFL¿FDWLRQV
6HOHFWSHUIRUPDQFH
RSWLRQFRGH
PPXOWLPRGH20
PPXOWLPRGH20
PPXOWLPRGH20
PPXOWLPRGH20
PPXOWLPRGH20
6LQJOHPRGH26
0D[DWWHQXDWLRQG%NP
'H¿QHVFDEOHW\SH
0,&0,&8QLWL]HG&DEOH
'H¿QHVVSHFLDO
UHTXLUHPHQWV
6WDQGDUGIRU0,&8QLWL]HG
ULVHUFDEOHV
MIC® Unitized Tight-Buffered Cables,
Riser, 36-144 Fibers
Family Spec Sheet 0053_NAFTA_AEN
Page 4 | Revision date 2020-03-09
Notes
MIC® Unitized Tight-Buffered Cables,
Riser, 36-144 Fibers
Family Spec Sheet 0053_NAFTA_AEN
Page 5 | Revision date 2020-03-09
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.
All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.
© 2020 Corning Optical Communications. All rights reserved.
-
1
-
2
-
3
-
4
-
5
Corning 072E81-T3131-24 Installation guide
- Category
- Fiber optic cables
- Type
- Installation guide
The Corning 072E81-T3131-24 is a single-mode optical fiber cable designed for use in high-speed data transmission applications. It features 24 fibers, each with a core diameter of 9 microns and a cladding diameter of 125 microns. The cable has a tight-buffered construction, with each fiber surrounded by a protective layer of acrylate. The outer jacket is made of flame-retardant PVC, making it suitable for use in indoor and outdoor applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
