GARDEN JACK GHT26C Hedge Trimmer User manual

Brand: GARDEN JACK

Model: GHT26C Hedge Trimmer

Category: Cordless hedge trimmers

Type: User manual

Hedge Trimmer

ORIGINAL INSTRUCTIONS

GHT26C

Hedge Trimmer

Contents

Contents Page. ...................................... 1

Safety Warnings. ................................... 2

Machine Diagram. ................................ 3

Preparation & Use. ............................ 4-5

Technical. .............................................. 6

Maintenance ........................................ 7

Declaration. .......................................... 8

GHT26C

1

Hedge Trimmer

2

Safety Warnings

GHT26C

2

Hedge Trimmer

Machine Info & Diagram

1. Recoil starter

2. Fuel tank

3. Throttle lever lockout

4. Throttle lever

5. Front handle

6. Rear handle

7. Spark plug

8. Hand guard

9. Cutting blade

10. Air cleaner

11.

Stop switch

12.

Blade guide

13. Gear case

14. Choke lever

15. Lock lever

16. Priming pump

17. Blade case

18. Combibox spanner

19. Instructions

GHT26C

3

Hedge Trimmer

Preparation and Use

GHT26C

4

Hedge Trimmer

The hedge trimmer is equipped with a 2-stroke engine. Always run the

engine on fuel, mixed with oil.

Provide good ventilation, when handling fuel.

Meanings:

GHT26C

5

Hedge Trimmer

Technical Data

- Maximum Engine Power

0.65 kW

- Horse Power

0.9HP

- Motor Type

2 STROKE

- Displacement

26cc

- Tank Capacity

0.32L

- Work Life

120Hrs

- Laser Cut

624mm

- Noise Level

110dB

- Fuel Ratio

FD40:1

- Blade Type

Double

- Blade Length

450/550mm

- Net Weight

4.5kg

GHT26C

6

Hedge Trimmer

Maintenance

Maintenance Hints

· Only use original replacement parts and original accessories. The use of

unapproved accessories and cutting tools increases the risk of

accidents.

· Incorrect repair and poor maintenance can shorten the life of the

machine and increase the risk of accidents. Do not perform any

modifications to the machine as this will endanger your safety.

· The condition of the cutting tool, the protective hood and the

shoulder harness must be checked before starting work. Particular

attention is to be paid to the cutting tool, which must be correctly

sharpened.

· Turn off the engine and remove the spark plug cap when replacing or

sharpening the cutting tool, and also when cleaning the cutting tool.

· Never straighten or weld damaged cutting tools.

· Clean the machine at regular intervals and check all screws and nuts

are well tightened.

· Never service or store the machine in the vicinity of open flames.

· When cleaning, servicing and storing the machine, always attach the

cutter blade protection.

Maintenance after each Operation

ATTENTION! Before cleaning, inspecting or maintaining the motor unit, make

sure that the engine has stopped and is cooled down. The engine will heat up

during operation. Do not touch the exhaust system. There is risk of burns!

Before working on the machine (transport, mounting, dismounting, cleaning

and servicing) and if not in use, remove the spark plug cap or disconnect the

gear shaft from the motor unit!

GHT26C

7

Hedge Trimmer

Declaration

Toolsave

Unit C, Manders Ind Est.

Old Heath Rd,

Wolverhampton

WV1 2RP

Tel: 01902450470

Declares that the Hedge Trimmer GHT26C

Is in compliance with the regulations including in the directives:2006/95/EC

EC DECLARATION OF COFORMITY

Certificate for EC-type examination delivered by BV LCIE China, Building4,No.

518 Xin Zhuan Rd, CaoHejing Songjiang High-Tech Park, Shanghai 201612,

China. (Verification No. 1666AF10WAR22482) Person who declares: Bill Evans

06/08/2020

GHT26C

8

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

GARDEN JACK GHT26C Hedge Trimmer User manual

Brand: GARDEN JACK

Model: GHT26C Hedge Trimmer

Category: Cordless hedge trimmers

Type: User manual

Other documents