Mitsubishi Electric MAC-883SG User guide

Type
User guide
OPTIONAL
PARTS
E-195
Air Outlet Guide
MAC-883SG
The air outlet guide changes the direction of air from the out-
door unit and prevents short cycling.
Figure
Specications
MUZ-HJ25/35VA
MUZ-BT20/25/35VG
Descriptions
Applicable Models
Dimensions Unit : mm
How to Use / How to Install
Components
Air outlet guide Screw M5 x 10 4
458
49.8 48 8 x 48 (=384)
476
485.6
14
52°
458
(18 x 2)
1. Preparations
Make a hole in the 4 concave parts indicated
by using a drill with a diameter of 4.0 mm.
The length of the drill bit should be about
10 mm as shown in the figure below. If the
drill bit is too long, it may damage the parts
inside the outdoor unit.
Difference in level on
the front panel (metal sheet) Drill the lower holes through the
front paneland the base.
Detail
33.8
458
33.8
15.3
15.3458
Exterior Color (Munsell) Ivory (3.0Y 7.8/1.1)
Surface treatment Polyestel powder coating
Material Electro-galvanized steel sheet
Weight 1.6 kg
MUZ-DM25/35VA
MUZ-HR25/35VF
OPTIONAL
PARTS
E-196
Air outlet Guide MAC-883SG
Air outlet guide
Screws
M5 x 10
Upwards
Air
direction
Air
direction
Air
direction
To the right
To the left
2. Attaching the air outlet guide
Attach the air outlet guide to the outdoor unit with the 4 screws provided with the air outlet guide.
The air outlet guide is allowed to be installed in any of the following directions so that air blows up-
wards, to the left, or to the right.
* Do not install the air outlet guide in the downward direction, or it may cause short cycling.
Note: Tighten the screws securely.
A chattering sound could be produced due to vibration if the screws are loose.
* Tightening torque 2 upper screws 1.47 N•m (15 kgf•cm)
2 lower screws 2.45 N•m (25 kgf•cm)
+0.196
-0.098 +2
-1
+0.196
-0.098 +2
-1
  • Page 1 1
  • Page 2 2

Mitsubishi Electric MAC-883SG User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI