340022

Center 340022 User guide

  • Hello! I've reviewed the Quick Start Guide for the CENTER programmable room thermostat 340022. This document provides instructions on installation, signal light meanings, and how to program the 7-day schedule with up to 4 set points per day. I'm here to answer any questions you have regarding the thermostat and its functionality.
  • What does a green light on the receiver mean?
    What does a red flashing light on the receiver mean?
    How many set points can I program per day?
Please read the following points before installation as this will help you to prevent
the most common reasons for loss of signal and product failure.
Scan this QR code for more information
or speak to one of our call center
advisors on 0344 292 7062
The thermostat and receiver are already paired together.
If you have un-paired them by accident, please see page
4 in the installation guide.
The thermostat and the receiver must be at least
30cm from any metal or electrics, including the boiler
casing. Mounting multiple receiver units alongside each
other can cause wireless saturation.
The building’s structure may influence the performance
of wireless products e.g. foil backed plasterboard, thick
stone walls, etc.
Keep the thermostat at least 1m away from any object
that could create interference e.g. microwave ovens,
wireless hubs, smart meters, cordless phone bases, etc.
The Center programmable thermostat has a default
schedule. Help the end user to program their schedule
after installation and save call backs later.
What do the lights on the receiver mean?
Green light - when the signal is good.
Red flashing light - when the wireless
signal is lost.
For further information please see page 3
of the installation guide.
Quick Start Guide
Wireless 7-day programmable room thermostat - 340022
Installer
Leave this Quick Start Guide with your customer
Your Center programmable thermostat will be most efficient when it’s used
in automatic mode not in manual mode.
A programmable thermostat allows you to create a schedule that
reflects the heating requirements in your home. This will help you
to reduce wasted heat and increase the systems efficiency.
There are no ‘off’ periods just time and temperature set points.
The boiler will only call for heat if the room temperature drops
below a set point.
You can program up to 4 different set points for each day of the
week, to suit your needs. To find out how to programme your
thermostat, please go to page 3 of the user guide.
R32349361-001 A
20º
Setting Selected temperature Routine
Set point 1. (P1) 6am - 19ºC Getting ready for work/kids ready for school
Set point 2. (P2) 9am - 15ºC Comfort temperature
Set point 3. (P3) 3pm - 21ºC Children are home
Set point 4. (P4) 9pm - 12ºC Temperature reduced for bedtime
Scan this QR code for more
information and to access the
user & installation guide.
Example of a working family’s schedule
25ºC
Temperature
Time
20ºC
15ºC
10ºC
5ºC
06:00 06:0009:00 12:00 15:00 18:00 21:00 23:00
P1
6am
19ºC
P2
9am
15ºC
P3
3pm
21ºC
P4
9pm
12ºC
Quick Start Guide
Wireless 7-day programmable room thermostat - 340022
End User
/