Vollrath Hands-Free Foot Door Opener Installation guide

Brand: Vollrath

Model: Hands-Free Foot Door Opener

Type: Installation guide

Vollrath Hands-Free Foot Door Opener is a device that allows you to open doors without using your hands. It is installed at the bottom corner of the swinging edge of the door and has a grip tape surface that you can step on to pull the door open. The bracket is secured with three sheet metal screws and is designed to be level and flush against the door. The provided decal can be placed in an easily visible location to remind users of the device's presence.

Vollrath Hands-Free Foot Door Opener is a device that allows you to open doors without using your hands. It is installed at the bottom corner of the swinging edge of the door and has a grip tape surface that you can step on to pull the door open. The bracket is secured with three sheet metal screws and is designed to be level and flush against the door. The provided decal can be placed in an easily visible location to remind users of the device's presence.

Installation Instructions

Hands-Free Foot Door Opener

©

2020 The Vollrath Company L.L.C. Part No. 352601 5/12/20

www.vollrathfoodservice.com

The Vollrath Company, L.L.C.

1236 North 18th Street

Sheboygan, WI 53081-3201 U.S.A.

Main Tel: 800.624.2051 or 920.457.4851

Main Fax: 800.752.5620 or 920.459.6573

Customer Service: 800.628.0830

Canada Customer Service: 800.695.8560

Technical Services

[email protected]

Induction Products: 800.825.6036

Countertop Warming Products: 800.354.1970

Toasters: 800-309-2250

All Other Products: 800.628.0832

INSTALLATION

Kit Contents

Tools You Will Need

• Drill and 5/32” drill bit

• Phillips head screwdriver

1. Place the bracket upside down at the bottom corner of the swinging

edge of the door with hole array flange facing upward and pushed

flush against the door.

2. Space the bracket inwards from the swing edge of the door

approximately 3/4”.

3. Drill through the center hole with a 5/32” drill bit to a depth of 1 ¼”

and then insert and tighten one of the provided sheet metal screws.

4. Make sure the bracket is level, then drill out the other two holes

using the bracket as a template

5. Remove the installation screw and flip the bracket over so the grip

tape surface faces up.

6. Install the 3 sheet metal screws in the predrilled holes to secure the

bracket in place. Tighten screws until the bracket is firmly secure.

7. Place the toe or foot on the bracket and pull towards you to open

door without the use of your hands.

Note: the ADA provides recommendations on door force pull settings

and basic instructions on how to adjust the most common types of

doors to open more easily. This information from the ADA can be found

at https://adata.org/factsheet/adjusting-doors-access

8. Install the provided decal in an easily visible location. Clean and dry

the surface where the decal is going before applying it to ensure a

strong bond.

Item No. Description

DRFTPULL-V Hands-Free Foot Door Opener

Part Quantity

DRFTPULL-V (foot door opener bracket) 1

Sheet Metal Screw, 1-1/4” 3

Decal, Hands-Free Foot Door Opener 1

1

Vollrath Hands-Free Foot Door Opener Installation guide

Brand: Vollrath

Model: Hands-Free Foot Door Opener

Type: Installation guide

Vollrath Hands-Free Foot Door Opener is a device that allows you to open doors without using your hands. It is installed at the bottom corner of the swinging edge of the door and has a grip tape surface that you can step on to pull the door open. The bracket is secured with three sheet metal screws and is designed to be level and flush against the door. The provided decal can be placed in an easily visible location to remind users of the device's presence.

Download PDF

Related papers

Other documents