========================================
Adaptec RAID Release dated: May 31, 2007
========================================
This release notes contain the following:
1. Description of the Release
2. Supported Controllers
3. Enhancements and Bugfixes
1. Description of the Release:
===============================
This is the official software release containing the list of software
components listed below:
- Firmware Version 5.2.0 Build 12415
- Windows Driver (32-bit and 64-bit) Version 5.2.0.11737
- Adaptec Storage Manager (ASM) and ICP Storage Manager (ISM)
Version 5.01 Build 16862
2. Supported Controllers:
=========================
- Adaptec RAID 3405
- Adaptec RAID 3805
- Adaptec RAID 3085
- Adaptec RAID 31205
- Adaptec RAID 31605
- ICP 5045BL
- ICP 5085BL
- ICP 5805BL
- ICP 5125BR
- ICP 5165BR
3. Enhancements and Bug Fixes:
==============================
- Enhanced medium error handling
- Expanded compatibility with enclosures
(see complete compatibility list at www.adaptec.com/compatibility)
- Updated Storage Manager (ASM and ISM) CD with new help files
- Controllers now recognized in ASM/ISM on new x64 Linux OS install
- ASM/ISM now opens in SCO UNIXWARE
- RAID 60 can now be created with more than 32 drives in ASM/ISM
- Clearing from CLI (Command Line Interface: ARCCONF) now asks for a
confirmation before execution
- Physical drives connecting to coexisting HBAs now display in ASM/ISM
- Different Simple Volumes are no longer assigned to the same name
- "Temperature back to normal" event now reports in OS Event Log
- CLI accepts "Initialization" method & "Priority" for Simple Volumes
- Drive location display now matches in CLI and ASM/ISM
- Arrays now show as present in manual rebuild for ICP5085BL
- SNMP registry entry data now present in 64-bit Windows
- Fixed ASM/ISM memory leak when SNMP is active
====================================================================
(c) 2007 Adaptec, Inc. All Rights Reserved.
This software contains the valuable trade secrets of Adaptec or its
licensors. The software is protected under international copyright
laws and treaties. This software may only be used in accordance with
the terms of its accompanying license agreement.
No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without prior
written consent of Adaptec, Inc.
Adaptec Inc.
691 South Milpitas Blvd.
Milpitas, CA 95035
====================================================================
  • Page 1 1
  • Page 2 2

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI