Chief ICPRIA1 Installation guide

Category
Flat panel wall mounts
Type
Installation guide

Chief ICPRIA1 is a versatile projector mount designed to support a wide range of projector models with a weight capacity of up to 50 lbs (22.68 kg). It features a sturdy construction with a 5x safety factor, ensuring reliable support for your valuable equipment. The mount offers various adjustment options, allowing you to achieve the perfect viewing angle and position for your projector. Installation is made easy with clear instructions and all necessary hardware included. Trust Chief ICPRIA1 to provide a secure and flexible mounting solution for your projector.

Chief ICPRIA1 is a versatile projector mount designed to support a wide range of projector models with a weight capacity of up to 50 lbs (22.68 kg). It features a sturdy construction with a 5x safety factor, ensuring reliable support for your valuable equipment. The mount offers various adjustment options, allowing you to achieve the perfect viewing angle and position for your projector. Installation is made easy with clear instructions and all necessary hardware included. Trust Chief ICPRIA1 to provide a secure and flexible mounting solution for your projector.

Installation Instructions

iCPRIA1
iC-PRIA1
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the
instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Improper installation can result in serious personal injury! Make sure that the mounting surface
structural members can support a redundant weight factor five times the total weight of the
equipment. If not, reinforce the mounting surface structural members before installing the
mount.
WARNING:
Supplied fasteners are only intended for mounting on solid wood, brick, concrete, or dry
ceilings with a maximum 3mm finish. For ceilings made of other material, consult your installer
and/or specialist supplier. Use other than for the prescribed equipment falls outside the responsibility
of the manufacturer.
WARNING:
The combined weight of the mount must not exceed 50 lbs (22.68 kg), the maximum load
capacity of the mount.
CAUTION
Inspect the unit for shipping damage.

 
.
 
.
:
! ,

 . , 

.
:

, , 
 3 .
, , ,
. , 
, .
:

,  22,68 .

.
iC-PRIA1
[304,79 ]
Ø12,00 
[469,89 ]
Ø18,50 

[117,35 ]
4,62 

[100,08 ]
3,94 
iC-PRIA1
A1
(4)
A (4)
M2.5 x 10
M3 x 10
H
(2)
6,35 
P (1)
B (4)
M4 x 12
J
(4)
Q
(1)
C (4)
M5 x 12
K
(1)
R (1)
D (4)
M6 x 12
L
(2)
7,938  x 12,7
S (1)
E (2)
M6 x 8
M
(4)
7,938  x 63,5
T (2)
F (4)
M4
N
(1)
U (4)
G (4)
M6
O
(1)
AA
(1)
DD
(4)
M3 x 10
GG
(2)
M6 x 8
KK
(2)
6,35  x 15,875 
NN
(2)
BB
(1)
EE
(4)
M4 x 12
HH
(4)
M6 x 12
LL
(2)
#10 x 6,35 
CC
(1)
FF
(4)
M5 x 12
JJ
(2)
7,938  x 12,7

(1)
M10 M11 M12
iC-PRIA1
Tighten Fastener

Loosen Fastener

Phillips Screwdriver

Hex-Head Wrench

Open-Ended Wrench

By Hand

Pencil Mark

Drill Hole

Adjust

Remove

Optional

Security Wrench

iC-PRIA1
S (1)
E (1/2)
T (1/2)
1
3
2
iC-PRIA1
L (2)
P (1)
R (1)
A, B, C, D (4)
4
5
6
iC-PRIA1
- 5 -
6 

50 
60 
8 
U (4)
C (1)
H (4)
M (4)
C (1)
H (2)
M (2)
Wood
stud


• Concrete Ceiling

8
7
• Concrete Ceiling

Wood
stud
ceiling

(2)
(4)
8 
60 
6 
50 
• Inspect ceiling mounting area to determine proper
method for installation. Recognize all CAUTIONS AND
WARNINGS listed in front of this manual.
, 

. 
,
.
iC-PRIA1
J (4)
9 10
11
iC-PRIA1
(2)
(2)
(2)
(4)
DD, HH,
FF, GG
(4)
JJ (2)
NN (2)
KK (2)
iC-PRIA1
12
13
Q (1)
14
15
USA · 8401 Eagle Creek Parkway, Suite 700 · Savage, Minnesota 55378 · 800.572.1373
EMEA · +31 (0)40 2668620
www.icmounts.com
©2009 Milestone AV Technologies. The iC Logo and StowAway are trademarks of Chief Manufacturing,
a products division of Milestone AV Technologies, a Duchossois Group Company.All rights reserved.
Patents and patents pending. Milestone AV Technologies, Savage, MN 55378, USA
8805-000202 RevD
11/09
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Chief ICPRIA1 Installation guide

Category
Flat panel wall mounts
Type
Installation guide

Chief ICPRIA1 is a versatile projector mount designed to support a wide range of projector models with a weight capacity of up to 50 lbs (22.68 kg). It features a sturdy construction with a 5x safety factor, ensuring reliable support for your valuable equipment. The mount offers various adjustment options, allowing you to achieve the perfect viewing angle and position for your projector. Installation is made easy with clear instructions and all necessary hardware included. Trust Chief ICPRIA1 to provide a secure and flexible mounting solution for your projector.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI