Hi-Speed USB 2.0 Hub Quick Start Guide Hi-Speed USB 2.0 Hub Quick Start Guide
Thank you for purchasing this Hi-Speed USB 2.0 Hub.
Installation
1.) If you have not already done so, please turn on your computer and
monitor.
2.) Insert the AC Adapter into any available power outlet.
3.) Insert the DC plug from the AC Adapter into the DC jack on the USB Hub
4.) Connect the USB A Male plug into any available USB port on your computer or
previously installed USB hub.
5.) Connect the USB B Male plug into the USB B Port on the back of the USB Hub.
6.) If you are using the first edition of Windows 98, please follow the on-screen
instructions. Otherwise, the USB Hub installation process is complete.
Warranty Information
24 Karat Warranty
Jo-Dan International, Inc. (JDI) warrants to the original owner that the product delivered in this
package will be free from defects in material and workmanship for three (3) years after purchase. For
the warranty to apply, you must provide the date of purchase and include proof of purchase. The
warranty does not cover the product if it is damaged in the process of being installed, or is otherwise
misused.
Conditions
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED,
IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING
OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. JDI SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. JDI NEITHER ASSUMES NOR AUTHORIZES
ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make
any representations or warranties (implied or otherwise) regarding the accuracy and completeness of
this document and shall in no event be liable for any loss of profit or any other commercial damage,
including but not limited to special, incidental, consequential, or other damages. No part of this
document may be reproduced or transmitted in any form by any means, electronic or mechanical,
including photocopying, recording or information recording and retrieval systems without the express
written permission of the manufacturer. All brand names and product names used in this document
are trademarks, or registered trademarks of their respective holders.
Contact Information
If you are experiencing problems with your device, please have the following information available so
we can better serve you.
– GoldX Part Number
– Serial Number (S/N)
– Operating system, version number and service pack number (if applicable)
– Driver version number (if applicable)
– Exact text of any error messages received
– Detailed explanation of the problem encountered
– Manufacturer and model number of your computer(s).
– Manufacturer(s) and model number(s) of the peripheral(s) connected to the GoldX device.
Internet www.goldxproducts.com
Technical Support [email protected]
Telephone 1-800-596-5100
Mailing Address GoldX Products
2704 Paldan Drive
Auburn Hills, MI 48326
© Copyright 2003. GoldX Products® and Plus Series® are registered trademarks of Jo-Dan
International, Inc.
Thank you for purchasing this Hi-Speed USB 2.0 Hub.
Installation
1.) If you have not already done so, please turn on your computer and
monitor.
2.) Insert the AC Adapter into any available power outlet.
3.) Insert the DC plug from the AC Adapter into the DC jack on the USB Hub
4.) Connect the USB A Male plug into any available USB port on your computer or
previously installed USB hub.
5.) Connect the USB B Male plug into the USB B Port on the back of the USB Hub.
6.) If you are using the first edition of Windows 98, please follow the on-screen
instructions. Otherwise, the USB Hub installation process is complete.
Warranty Information
24 Karat Warranty
Jo-Dan International, Inc. (JDI) warrants to the original owner that the product delivered in this
package will be free from defects in material and workmanship for three (3) years after purchase. For
the warranty to apply, you must provide the date of purchase and include proof of purchase. The
warranty does not cover the product if it is damaged in the process of being installed, or is otherwise
misused.
Conditions
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED,
IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING
OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. JDI SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. JDI NEITHER ASSUMES NOR AUTHORIZES
ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make
any representations or warranties (implied or otherwise) regarding the accuracy and completeness of
this document and shall in no event be liable for any loss of profit or any other commercial damage,
including but not limited to special, incidental, consequential, or other damages. No part of this
document may be reproduced or transmitted in any form by any means, electronic or mechanical,
including photocopying, recording or information recording and retrieval systems without the express
written permission of the manufacturer. All brand names and product names used in this document
are trademarks, or registered trademarks of their respective holders.
Contact Information
If you are experiencing problems with your device, please have the following information available so
we can better serve you.
– GoldX Part Number
– Serial Number (S/N)
– Operating system, version number and service pack number (if applicable)
– Driver version number (if applicable)
– Exact text of any error messages received
– Detailed explanation of the problem encountered
– Manufacturer and model number of your computer(s).
– Manufacturer(s) and model number(s) of the peripheral(s) connected to the GoldX device.
Internet www.goldxproducts.com
Technical Support [email protected]
Sales info@goldxproducts.com
Telephone 1-800-596-5100
Mailing Address GoldX Products
2704 Paldan Drive
Auburn Hills, MI 48326
© Copyright 2003. GoldX Products® and Plus Series® are registered trademarks of Jo-Dan
International, Inc.
REGISTER YOUR PRODUCT ON-LINE AT
WWW.GOLDXPRODUCTS.COM
REGISTER YOUR PRODUCT ON-LINE AT
WWW.GOLDXPRODUCTS.COM
/
